From ArchWiki
Revision as of 11:59, 10 June 2013 by Avamander (Talk | contribs) (= Installation)

Jump to: navigation, search

Tango-edit-clear.pngThis article or section needs language, wiki syntax or style improvements.Tango-edit-clear.png

Reason: Needs to be updated for Help:Style compliance. (Discuss in Talk:Hamachi#)
Hamachi is a proprietary (closed source) commercial VPN software. With Hamachi you can organize two or more computers with an Internet connection into their own virtual network for direct secure communication.

= Installation

Best way to install hamachi2 is to download the .deb package from the official source and then installing it (with sudo dpkg -i pakcage.deb && apt-get install -f).There is a GUI for hamachi called Haguichi, it helps using hamachi2. All custom settings can be accessed by command line. Version 2 of the Linux Hamachi client exists and is currently in beta. It is available from the labs page on the Hamachi website; however, the vendor's tarball requires LSB.


Set Up Tun

Being as section above can only be applied for init.scripts, in order to install the module, as root run:

# modprobe tun

Then add tun to the list of modules by using your favorite text editor and Create

#Load tun module at boot.

Hamachi 2 (beta)

Hamachi 2 is configured in /var/lib/logmein-hamachi/h2-engine-override.cfg (create that file if it doesn't exist). Unfortunately, it isn't easy to find a comprehensive list of possible configuration options, so here are a few that you can use.

Using the hamachi command line tool as a regular user

In order to use the hamachi command line tool as a regular user, add the following line to the configuration file:

Ipc.User YourUserNameHere

Automatically setting a custom nickname

Normally, Hamachi uses your system's hostname as the nickname that other Hamachi users will see. If you want to automatically set a custom nickname every time Hamachi starts, add the following line to the configuration file:

Setup.AutoNick YourNicknameHere

You can also manually set a nickname using the hamachi command line tool:

# hamachi set-nick YourNicknameHere

However, this needs to be done every time Hamachi is (re-)started, so if you always want to use the same nickname, setting it automatically (as explained above) is probably easier.

Running Hamachi

Start up the (matt) daemon

$hamachi start

or, if you use systemd

#systemctl start logmein-hamachi

Now you have a whole bunch of commands at your disposal. These are in no particular order and are fairly self explanatory.

$hamachi set-nick bob
$hamachi login
$hamachi create my-net secretpassword
$hamachi go-online my-net
$hamachi list
$hamachi go-offline my-net

To get a list of all the commands, run:

$hamachi ?

Note: Make sure you change the status of the channel(s) you are in to "online" if you want to perform any network actions on computers in there.


The logmein-hamachiAUR AUR package also includes a nice little Systemd daemon.

If you feel like it, you can set Hamachi to start at every boot with Systemd:

systemctl enable logmein-hamachi

To start the Hamachi Daemon immediately, use this command:

systemctl start logmein-hamachi
Note: If for some reason, hamachi doesn't have a Systemd daemon, you can use one from here.


Various GUI frontends for Hamachi are available in the AUR.

For Hamachi 1:

  • haguichi (Gtk2, mono)
  • ghamachi (Gtk2)
  • hamachi-gui (Gtk2)

For Hamachi 2 (beta):

  • quamachi (Qt4)
  • haguichi (Gtk2, mono)


Hamachi times out soon after launch

If hamachi stops working after a short period of time it can be that the client is timing out. Create ~/.hamachi/config and add the following to it:

KeepAlive 10

If you have problems connecting to some hosts

Check if they are using Hamachi 2. If that is the case, then it is a known issue with the Hamachi 2 client connecting to the Hamachi Linux client.

/etc/init.d/logmein-hamachi is not found

Replace that path with /etc/rc.d/logmein-hamachi.

Error when trying to run hamachi-init

If there is an error while trying to load libstdc++.so.5, you want to install it. This library can be found in the extra repository, so you can install it by running pacman -S libstdc++5.

If you get an error while trying to load libcrypto.so.0.9.7, a temporary solution is to create a link from /usr/lib/libcrypto.so.0.9.7 to /usr/lib/libcrypto.so by running ln -s /usr/lib/libcrypto.so /usr/lib/libcrypto.so.0.9.7.

See also