Difference between revisions of "Hddtemp"

From ArchWiki
Jump to: navigation, search
(Setup with systemd: Added a note to add drives when running deamonized.)
(Daemon: Remove rc.d info. Not supported by Arch anymore.)
(One intermediate revision by one other user not shown)
Line 15: Line 15:
 
==Daemon==
 
==Daemon==
 
Running the daemon gives you the possibility to access the temperature via an TCP/IP request, so you could use this in order to check the temperature from outside, or within some scripts.
 
Running the daemon gives you the possibility to access the temperature via an TCP/IP request, so you could use this in order to check the temperature from outside, or within some scripts.
===Setup with systemd===
 
  
 
Once hddtemp has been installed, standard systemctl procedures work to start the daemon:
 
Once hddtemp has been installed, standard systemctl procedures work to start the daemon:
Line 21: Line 20:
  
 
To start it on boot, enable it:
 
To start it on boot, enable it:
  #systemctl enable hddtemp
+
  # systemctl enable hddtemp
  
===Setup with legacy initscripts===
+
{{Note|1=Arguments to {{ic|hddtemp}} are directly given in {{ic|/usr/lib/systemd/system/hddtemp.service}}. This is especially important if you have multiple disks, because in the default configuration only {{ic|/dev/sda}} is monitored. Here is how to add other drives:
 
+
* Change the {{ic|ExecStart}} line in {{ic|/usr/lib/systemd/system/hddtemp.service}} adding the drives you want to monitor, e.g.:
Start the daemon:
+
  ExecStart=/usr/bin/hddtemp -dF /dev/sda /dev/sdb
# rc.d start hddtemp
+
* Reload systemd's unit files:
 
+
# systemctl --system daemon-reload
Add the daemon to the DAEMONS array in /etc/rc.conf to facilitate auto-start on boot:
+
* Restart hddtemp service:
  # DAEMONS=(... '''hddtemp''' ...)
+
{{bc|# systemctl restart hddtemp}}
 +
}}
  
 
===Usage===
 
===Usage===

Revision as of 13:35, 31 August 2013

hddtemp is a small utility (daemonizable) that gives you the temperature of your hard drive by reading S.M.A.R.T. information (for drives that support this feature).

Installation

Sync and install with pacman:

# pacman -S hddtemp

Usage

Hddtemp can be invoked with the drive as the argument:

# hddtemp /dev/sd[x]

Where x is the drive.

Daemon

Running the daemon gives you the possibility to access the temperature via an TCP/IP request, so you could use this in order to check the temperature from outside, or within some scripts.

Once hddtemp has been installed, standard systemctl procedures work to start the daemon:

# systemctl start hddtemp

To start it on boot, enable it:

# systemctl enable hddtemp
Note: Arguments to hddtemp are directly given in /usr/lib/systemd/system/hddtemp.service. This is especially important if you have multiple disks, because in the default configuration only /dev/sda is monitored. Here is how to add other drives:
  • Change the ExecStart line in /usr/lib/systemd/system/hddtemp.service adding the drives you want to monitor, e.g.:
ExecStart=/usr/bin/hddtemp -dF /dev/sda /dev/sdb
  • Reload systemd's unit files:
# systemctl --system daemon-reload
  • Restart hddtemp service:
# systemctl restart hddtemp

Usage

Another way to get the temperature is by connecting to the daemon which is listening on port 7634.

$ telnet localhost 7634

Or with netcat:

$ nc localhost 7634

Refer to the manpage for information like supported drives, logging, etc.

$ man hddtemp

Monitors

Hddtemp can be easily integrated with system monitors like Conky, the sensors-applet for GNOME Panel or the xfce4-sensors-plugin for Xfce Panel.

See also

lm sensors