Difference between revisions of "HiDPI"

From ArchWiki
Jump to navigation Jump to search
m (Adding Zoom to the applications list.)
(→‎Side display: xorg 1.20 should fix the mouse bug)
Line 361: Line 361:
=== Side display ===
=== Side display ===
{{Out of date|1=The bug with the mouse unable to reach the whole screen should be [https://bugs.freedesktop.org/show_bug.cgi?id=39949#c80 fixed in xorg 1.20].}}
One workaround is to use [[xrandr]]'s scale option. To have a non-HiDPI monitor (on DP1) right of an internal HiDPI display (eDP1), one could run:
One workaround is to use [[xrandr]]'s scale option. To have a non-HiDPI monitor (on DP1) right of an internal HiDPI display (eDP1), one could run:

Revision as of 08:03, 14 July 2018

HiDPI (High Dots Per Inch) displays, also known by Apple's "Retina Display" marketing name, are screens with a high resolution in a relatively small format. They are mostly found in high-end laptops and monitors.

Not all software behaves well in high-resolution mode yet. Here are listed most common tweaks which make work on a HiDPI screen more pleasant.

Desktop environments


To enable HiDPI, Settings > Devices > Displays,or use gsettings:

$ gsettings set org.gnome.desktop.interface scaling-factor 2
Note: scaling-factor only allows whole numbers to be set. 1 = 100%, 2 = 200%, etc...

Fractional Scaling

A setting of 2, 3, etc, which is all you can do with scaling-factor, may not be ideal for certain HiDPI displays and smaller screens (e.g. small tablets).

  • wayland

Enable fractional Scaling experimental-feature:

$ gsettings set org.gnome.mutter experimental-features "['scale-monitor-framebuffer']"

then open Settings > Devices > Displays

  • xorg

You can achieve any non-integer scale factor by using a combination of GNOME's scaling-factor and xrandr. This combination keeps the TTF fonts properly scaled so that they do not become blurry if using xrandr alone. You specify zoom-in factor with gsettings and zoom-out factor with xrandr.

First scale GNOME up to the minimum size which is too big. Usually "2" is already too big, otherwise try "3" etc. Then start scaling down by setting zoom-out factor with xrandr. First get the relevant output name, the examples below use eDP1. Start e.g. with zoom-out 1.25 times. If the UI is still too big, increase the scale factor; if it is too small decrease the scale factor.

$ xrandr --output eDP1 --scale 1.25x1.25
Note: To allow the mouse to reach the whole screen, you may need to use the --panning option as explained in #Side display.

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: The following was initially added under #X Resources. Clarify how it integrates with the info there or that above for GNOME. (Discuss in Talk:HiDPI#GNOME ignores X settings)

GNOME ignores X settings due to its xsettings Plugin in Gnome Settings Daemon, where DPI setting is hard coded. There is blog entry for recompiling Gnome Settings Daemon. In the source documentation there is another way mentioned to set X settings DPI:

You can use the dconf Editor and navigate to key


and complement the entry with the value

'Xft/DPI': <153600>

From README.xsettings

Noting that variants must be specified in the usual way (wrapped in <>).

Note also that DPI in the above example is expressed in 1024ths of an inch.


You can use KDE's settings to fine tune font, icon, and widget scaling. This solution affects both Qt and Gtk+ applications.

To adjust font, widget, and icon scaling together:

  1. System Settings → Display and Monitor → Display Configuration → Scale Display
  2. Drag the slider to the desired size
  3. Restart for the settings to take effect

To adjust only font scaling:

  1. System Settings → Fonts
  2. Check "Force fonts DPI" and adjust the DPI level to the desired value. This setting should take effect immediately for newly started applications. You will have to logout and login for it to take effect on Plasma desktop.

To adjust only icon scaling:

  1. System Settings → Icons → Advanced
  2. Choose the desired icon size for each category listed. This should take effect immediately.

Display Scale not integer bug :

When you use not integer values for Display Scale it causes font render issue in some QT application ( ex. okular ).

A workaround for this is to:

  1. Set the scale value to 1
  2. Adjust your font and icons and use the "Force fonts DPI" ( this affects all apps, also GTK but not create issue with the fonts )
  3. Restart KDE
  4. If required tune the GTK apps using the variables GDK_SCALE/GDK_DPI_SCALE (as described above)

Tray icons with fixed size

The tray icons are not scaled with the rest of the desktop, since Plasma ignores the Qt scaling settings by default. To make Plasma respect the Qt settings, set PLASMA_USE_QT_SCALING to 1.


Go to Settings Manager → Appearance → Fonts, and change the DPI parameter. The value of 180 or 192 seems to work well on Retina screens. To get a more precise number, you can use xdpyinfo | grep resolution, and then double it.

To enlarge icons in system tray, right-click on it (aim for empty space / top pixels / bottom pixels, so that you will not activate icons themselves) → “Properties” → set “Maximum icon size” to 32, 48 or 64.


Has good support out of the box.


For E18, go to the E Setting panel. In Look → Scaling, you can control the UI scaling ratios. A ratio of 1.2 seems to work well for the native resolution of the MBPr 15" screen.

X Server

Some programs use the DPI given by the X server. Examples are i3 (source) and Chromium (source).

To verify that the X Server has properly detected the physical dimensions of your monitor, use the xdpyinfo utility from the xorg-xdpyinfo package:

$ xdpyinfo | grep -B 2 resolution
screen #0:
  dimensions:    3200x1800 pixels (423x238 millimeters)
  resolution:    192x192 dots per inch

This example uses inaccurate dimensions (423mm x 328mm, even though the Dell XPS 9530 has 346mm x 194mm) to have a clean multiple of 96 dpi, in this case 192 dpi. This tends to work better than using the correct DPI — Pango renders fonts crisper in i3 for example.

If the DPI displayed by xdpyinfo is not correct, see Xorg#Display size and DPI for how to fix it.

X Resources

If you are not using a desktop environment such as KDE, Xfce, or other that manipulates the X settings for you, you can set the desired DPI setting manually via the Xft.dpi variable in Xresources:

Xft.dpi: 180
Xft.autohint: 0
Xft.lcdfilter:  lcddefault
Xft.hintstyle:  hintfull
Xft.hinting: 1
Xft.antialias: 1
Xft.rgba: rgb

Make sure the settings are loaded properly when X starts, for instance in your ~/.xinitrc with xrdb -merge ~/.Xresources (see Xresources for more information).

This will make the font render properly in most toolkits and applications, it will however not affect things such as icon size! Setting Xft.dpi at the same time as toolkit scale (e.g. GDK_SCALE) may cause interface elements to be much larger than intended in some programs like firefox.

GUI toolkits

Qt 5

Since Qt 5.6, Qt 5 applications can be instructed to honor screen DPI by setting the QT_AUTO_SCREEN_SCALE_FACTOR environment variable:


If automatic detection of DPI does not produce the desired effect, scaling can be set manually per-screen (QT_SCREEN_SCALE_FACTORS) or globally (QT_SCALE_FACTOR). For more details see the Qt blog post.

  • If you manually set the screen factor, it is important to set QT_AUTO_SCREEN_SCALE_FACTOR=0 otherwise some applications which explicitly force high DPI enabling get scaled twice.
  • QT_SCALE_FACTOR scales fonts, but QT_SCREEN_SCALE_FACTORS does not scale fonts.
  • If you also set the font DPI manually in xrdb to support other toolkits, QT_SCALE_FACTORS will give you huge fonts.

GDK 3 (GTK+ 3)

To scale UI elements by a factor of two:

export GDK_SCALE=2

To undo scaling of text:

export GDK_DPI_SCALE=0.5

GTK+ 2

Scaling of UI elements is not supported by the toolkit itself, however it's possible to generate a theme with elements pre-scaled for HiDPI display using oomox-gitAUR.

Elementary (EFL)

To scale UI elements by a factor of 1.5:

 export ELM_SCALE=1.5

For more details see https://phab.enlightenment.org/w/elementary/

Boot managers


Lower the framebuffer resolution

Set a lower resolution for the framebuffer as explained in GRUB/Tips and tricks#Setting the framebuffer resolution.

Change GRUB font size

Find a ttf font that you like in /usr/share/fonts/.

Convert the font to a format that GRUB can utilize:

# grub-mkfont -s 30 -o /boot/grubfont.pf2 /usr/share/fonts/FontFamily/FontName.ttf
Note: Change the -s 30 parameter to modify the font size

Edit /etc/default/grub to set the new font as shown in GRUB/Tips and tricks#Background image and bitmap fonts:


Update GRUB configuration by running grub-mkconfig -o /boot/grub/grub.cfg




Firefox should use the #GDK 3 (GTK+ 3) settings. However, the suggested GDK_SCALE suggestion doesn't consistently scale the entirety of Firefox, and doesn't work for fractional values (e.g., a factor of 158DPI/96DPI = 1.65 for a 1080p 14" laptop). You may want to use GDK_DPI_SCALE instead.

To override those, open Firefox advanced preferences page (about:config) and set parameter layout.css.devPixelsPerPx to 2 (or find the one that suits you better; 2 is a good choice for Retina screens), but it also doesn't consistently scale the entirety of Firefox. If Firefox is not scaling fonts, you may want to create userChrome.css and add appropriate styles to it. More information about userChrome.css at mozillaZine.

@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");

/* #tabbrowser-tabs, #navigator-toolbox, menuitem, menu, ... */
* {
    font-size: 15px !important;

/* exception for badge on adblocker */
.toolbarbutton-badge {
    font-size: 8px !important;

If you use a HiDPI monitor such as Retina display together with another monitor, you can use AutoHiDPI add-on in order to automatically adjust layout.css.devPixelsPerPx setting for the active screen. Also, since Firefox version 49, it auto-scales based on your screen resolution, making it easier to deal with 2 or more screens.

Chromium / Google Chrome

Chromium should use the #GDK 3 (GTK+ 3) settings.

To override those, use the --force-device-scale-factor flag with a scaling value. This will scale all content and ui, including tab and font size. For example chromium --force-device-scale-factor=2.

Using this option, a scaling factor of 1 would be normal scaling. Floating point values can be used. To make the change permanent, for Chromium, you can add it to ~/.config/chromium-flags.conf:


To make this work for Chrome, add the same option to ~/.config/chrome-flags.conf instead.

If you use a HiDPI monitor such as Retina display together with another monitor, you can use the reszoom extension in order to automatically adjust the zoom level for the active screen.


Opera should use the #GDK 3 (GTK+ 3) settings.

To override those, use the --alt-high-dpi-setting=X command line option, where X is the desired DPI. For example, with --alt-high-dpi-setting=144 Opera will assume that DPI is 144. Newer versions of opera will auto detect the DPI using the font DPI setting (in KDE: the force font DPI setting.)


See #Firefox. To access about:config, go to Edit → Preferences → Advanced → Config editor.

Wine applications


$ winecfg

and change the "dpi" setting found in the "Graphics" tab. This only affects the font size.


Skype for Linux (skypeforlinux-stable-binAUR package) uses #GDK 3 (GTK+ 3).


You can change scale factor by simple Ctrl++ for zoom in, Ctrl+- for zoom out and Ctrl+0 for default scale. Scaling setting will be saved in ~/.config/spotify/Users/YOUR-SPOTIFY-USER-NAME/prefs:


Also Spotify can be launched with a custom scaling factor which will be multiplied with setting specified in ~/.config/spotify/Users/YOUR-SPOTIFY-USER-NAME/prefs, for example

$ spotify --force-device-scale-factor=1.5

Zathura document viewer

No modifications required for document viewing.

UI text scaling is specified via configuration file (note that "font" is a girara option):

set font "monospace normal 20"

Sublime Text 3

Sublime Text 3 has full support for display scaling. Go to Preferences > Settings > User Settings and add "dpi_scale": 2.0 to your settings (source).

IntelliJ IDEA

IntelliJ IDEA 15 and above should include HiDPI support.[1] If it does not work, the most convenient way to fix the problem in this case seems to be changing the Override Default Fonts setting:

File -> Settings -> Behaviour & Appearance -> Appearance

The addition of -Dhidpi=true to the vmoptions file in either $HOME/.IdeaC14/ or /usr/share/intelligj-idea-ultimate-edition/bin/ of release 14 should not be required anymore.


NetBeans allows the font size of its interface to be controlled using the --fontsize parameter during startup. To make this change permanent edit the /usr/share/netbeans/etc/netbeans.conf file and append the --fontsize parameter to the netbeans_default_options property.[2]

The editor fontsize can be controlled from Tools → Option → Fonts & Colors.

The output window fontsize can be controlled from Tools → Options → Miscelaneous → Output

Gimp 2.8

Use a high DPI theme, or adjust gtkrc of an existing theme. (Change all occurrences of the size button to dialog, for example GimpToolPalette::tool-icon-size.)

There is also the gimp-hidpi.


Official HiDPI support

  • Starting on 25 of January 2018 in the beta program there is actual support for HiDPI and it should be automatically detected.
  • Steam -> Settings -> Interface -> check "Enlarge text and icons based on monitor size" (restart required)
  • If it not automatically detected use GDK_SCALE=2 to set the desired scale factor.


The HiDPI-Steam-Skin can be installed to increase the font size of the interface. While not perfect, it does improve usability.

Note: The README for the HiDPI skin lists several possible locations for where to place the skin. The correct folder out of these can be identified by the presence of a file named skins_readme.txt.

MetroSkin Unofficial Patch also helps with HiDPI on Steam with Linux.

Java applications

Java applications using the AWT/Swing framework can be scaled by defining the sun.java2d.uiScale variable when invoking java. For example,

java -Dsun.java2d.uiScale=2 -jar some_application.jar

Since Java 9 the GDK_SCALE environment variable is used to scale Swing applications accordingly.

Mono applications

According to [3], Mono applications should be scalable like GTK3 applications.


Recent versions (R2017b) of Matlab allow to set the scale factor:

>> s = settings;s.matlab.desktop.DisplayScaleFactor
>> s.matlab.desktop.DisplayScaleFactor.PersonalValue = 2

The settings take effect after MATLAB is restarted.


Note: This ony applies to KDE with scaling enabled.

VirtualBox also applies the system-wide scaling to the virtual monitor, which reduces the maximum resolution inside VMs by your scaling factor (see [4]).

This can be worked around by calculating the inverse of your scaling factor and manually setting this new scaling factor for the VirtualBox execution, e.g.

$ QT_SCALE_FACTOR=0.5 VirtualBox --startvm vm-name


Zoom can be started with a proper scaling by overriding the QT_SCALE_FACTOR environment variable.


Unsupported applications

run_scaled-gitAUR can be used to scale applications (which uses xpra internally).

Another approach is to run the application full screen and without decoration in its own VNC desktop. Then scale the viewer. With Vncdesk (vncdesk-gitAUR from the AUR) you can set up a desktop per application, then start server and client with a simple command such as vncdesk 2.

x11vnc has an experimental option -appshare, which opens one viewer per application window. Perhaps something could be hacked up with that.

Multiple displays

The HiDPI setting applies to the whole desktop, so non-HiDPI external displays show everything too large. However, note that setting different scaling factors for different monitors is already supported in Wayland.

Side display

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: The bug with the mouse unable to reach the whole screen should be fixed in xorg 1.20. (Discuss in Talk:HiDPI#)

One workaround is to use xrandr's scale option. To have a non-HiDPI monitor (on DP1) right of an internal HiDPI display (eDP1), one could run:

xrandr --output eDP-1 --auto --output DP-1 --auto --scale 2x2 --right-of eDP-1

When extending above the internal display, you may see part of the internal display on the external monitor. In that case, specify the position manually, e.g. using this script.

You may run into problems with your mouse not being able to reach the whole screen. That is a known bug with an xserver-org patch (or try the panning option, but that might cause other problems).

An example of the panning syntax for a 4k laptop with an external 1920x1080 monitor to the right:

xrandr --output eDP-1 --auto --output HDMI-1 --auto --panning 3840x2160+3840+0 --scale 2x2 --right-of eDP-1

Generically if your HiDPI monitor is AxB pixels and your regular monitor is CxD and you are scaling by [ExF], the commandline for right-of is:

xrandr --output eDP-1 --auto --output HDMI-1 --auto --panning [C*E]x[D*F]+[A]+0 --scale [E]x[F] --right-of eDP-1

If panning is not a solution for you it may be better to set position of monitors and fix manually the total display screen.

An example of the syntax for a 2560x1440 WQHD 210 DPI laptop monitor (eDP1) using native resolution placed below a 1920x1080 FHD 96 DPI external monitor (HDMI) scaled to match global DPI settings:

xrandr --output eDP-1 --auto --pos 0x1458 --output HDMI-1 --scale 1.35x1.35 --auto --pos 0x0 --fb 2592x2898

The total screen size (--fb) and positioning (--pos) are to be calculated taking into account the scaling factor.

In this case laptop monitor (eDP1) has no scaling and uses native mode for resolution so it will total 2560x1440, but external monitor (HDMI) is scaled and it has to be considered a larger screen so (1920*1.35)x(1080*1.35) from where the eDP1 Y position came 1080*1.35=1458 and the total screen size: since one on top of the other X=(greater between eDP1 and HDMI, so 1920*1.35=2592) and Y=(sum of the calculated heights of eDP1 and HDMI, so 1440+(1080*1.35)=2898).

Generically if your hidpi monitor is AxB pixels and your regular monitor is CxD and you are scaling by [ExF] and hidpi is placed below regular one, the commandline for right-of is:

xrandr --output eDP-1 --auto --pos 0x(DxF) --output HDMI-1 --auto --scale [E]x[F] --pos 0x0 --fb [greater between A and (C*E)]x[B+(D*F)]

You may adjust the "sharpness" parameter on your monitor settings to adjust the blur level introduced with scaling.

Note: Above solution with --scale 2x2 does not work on some Nvidia cards. No solution is currently available. [5] A potential workaround exists with configuring ForceFullCompositionPipeline=On on the CurrentMetaMode via nvidia-settings. For more info see [6].

Multiple external monitors

There might be some problems in scaling more than one external monitors which have lower dpi than the built-in HiDPI display. In that case, you may want to try downscaling the HiDPI display instead, with e.g.

xrandr --output eDP1 --scale 0.5x0.5 --output DP2 --right-of eDP1 --output HDMI1 --right-of DP2

In addition, when you downscale the HiDPI display, the font on the HiDPI display will be slightly blurry, but it's a different kind of bluriness compared with the one introduced by upscaling the external displays. You may compare and see which kind of bluriness is less problematic for you.


If all you want is to mirror ("unify") displays, this is easy as well:

With AxB your native HiDPI resolution (for ex 3200x1800) and CxD your external screen resolution (for ex 1920x1200)

xrandr --output HDMI --scale [A/C]x[B/D]

In this example which is QHD (3200/1920 = 1.66 and 1800/1200 = 1.5)

xrandr --output HDMI --scale 1.66x1.5

For UHD to 1080p (3840/1920=2 2160/1080=2)

xrandr --output HDMI --scale 2x2

You may adjust the "sharpness" parameter on your monitor settings to adjust the blur level introduced with scaling.

Linux console

The default Linux console font will be very small on hidpi displays, the largest font present in the kbd package is latarcyrheb-sun32 and other packages like terminus-font contain further alternatives, such as ter-132n(normal) and ter-132b(bold). See Fonts#Console fonts for configuration details.

After changing the font, it is often garbled and unreadable when changing to other virtual consoles (tty2-6). To fix this you can force specific mode for KMS, such as video=2560x1600@60 (substitute in the native resolution of your HiDPI display), and reboot.

See also