HiDPI (High Dots Per Inch) displays, also known by Apple's "Retina Display" marketing name, are screens with a high resolution in a relatively small format. They are mostly found in high-end laptops and monitors.
Not all software behaves well in high-resolution mode yet. Here are listed most common tweaks which make work on a HiDPI screen more pleasant.
- 1 Desktop environments
- 2 X Server
- 3 X Resources
- 4 GUI toolkits
- 5 Boot managers
- 6 Applications
- 6.1 Browsers
- 6.2 Thunderbird
- 6.3 Wine applications
- 6.4 Skype
- 6.5 Spotify
- 6.6 Zathura document viewer
- 6.7 Sublime Text 3
- 6.8 IntelliJ IDEA
- 6.9 NetBeans
- 6.10 Gimp 2.8
- 6.11 Steam
- 6.12 Java applications
- 6.13 Mono applications
- 6.14 Unsupported applications
- 7 Multiple displays
- 8 Linux console
- 9 See also
To enable HiDPI, use gsettings:
$ gsettings set org.gnome.desktop.interface scaling-factor 2
A setting of
2, 3, etc, which is all you can do with
scaling-factor, may not be ideal for certain HiDPI displays and smaller screens (e.g. small tablets).
You can achieve any non-integer scale factor by using a combination of GNOME's
scaling-factor and xrandr. This combination keeps the TTF fonts properly scaled so that they do not become blurry if using
xrandr alone. You specify zoom-in factor with
gsettings and zoom-out factor with xrandr.
First scale GNOME up to the minimum size which is too big. Usually "2" is already too big, otherwise try "3" etc. Then start scaling down by setting zoom-out factor with xrandr. First get the relevant output name, the examples below use
eDP1. Start e.g. with zoom-out 1.25 times. If the UI is still too big, increase the scale factor; if it is too small decrease the scale factor.
$ xrandr --output eDP1 --scale 1.25x1.25
GNOME ignores X settings due to its xsettings Plugin in Gnome Settings Daemon, where DPI setting is hard coded. There is blog entry for recompiling Gnome Settings Daemon. In the source documentation there is another way mentioned to set X settings DPI:
You can use the dconf Editor and navigate to key
and complement the entry with the value
Noting that variants must be specified in the usual way (wrapped in <>).
Note also that DPI in the above example is expressed in 1024ths of an inch.
KDE plasma 5 provides excellent support for HiDPI screens out of the box. You can set the correct DPI by #Using KDE system settings. Alternatives are to use SDDM#DPI settings or the #X Server. However, it seems that Gtk+ applications ignore both SDDM and X settings. You can fix this by creating a custom login session as follows:
# cp /usr/share/xsessions/plasma.desktop /usr/share/xsessions/plasma-custom.desktop # sed -i 's/\/usr\/bin\/startkde/\/usr\/bin\/startkde-custom/g' /usr/share/xsessions/plasma-custom.desktop # sed -i 's/Plasma/Plasma (custom)/g' /usr/share/xsessions/plasma-custom.desktop
/usr/bin/startkde-custom with the following contents:
#!/bin/bash export GDK_SCALE=2 export GDK_DPI_SCALE=-1 export XCURSOR_SIZE=48 /usr/bin/startkde "$@"
The negative dpi scale ensures that the text is sized correctly on a 15" Retina Macbook Pro. You may need to adjust these values depending on your display.
Do not forget to ensure that the script can be executed (
# chmod +x /usr/bin/startkde-custom). Logout and choose your new custom session (you may need to restart your display manager for it to show up) and GTK+ applications should be scaled correctly.
Using KDE system settings
You can use KDE's settings to fine tune font, icon, and widget scaling. This solution affects both Qt and Gtk+ applications.
To adjust font, widget, and icon scaling together:
- System Settings → Display and Monitor → Display Configuration → Scale Display (note: if you set a not integer value it may create issue with the font render in some application )
- Drag the slider to the desired size
- Restart for the settings to take effect
To adjust only font scaling:
- System Settings → Fonts
- Check "Force fonts DPI" and adjust the DPI level to the desired value. This setting should take effect immediately for newly started applications. You will have to logout and login for it to take effect on Plasma desktop.
To adjust only icon scaling:
- System Settings → Icons → Advanced
- Choose the desired icon size for each category listed. This should take effect immediately.
Tray icons with fixed size
If the tray icons are not scaled with the rest of the desktop, the size can be set in the Plasma configuration. System-wide configuration is located in the file
/usr/share/plasma/plasmoids/org.kde.plasma.private.systemtray/contents/config/main.xml, where the dimension of icons can be controlled by editing the default value for iconSize (a value of 2 should be fine):
<entry name="iconSize" type="Int"> <label>Default icon size for the systray icons, it's an enum which values mean, Small, SmallMedium, Medium, Large, Huge, Enormous respectively. On low DPI systems they correspond to 16, 22, 32, 48, 64, 128 pixels. On high DPI systems those values would be scaled up, depending on the DPI.</label> <default>2</default> </entry>
User configuration is located in the file
~/.config/plasma-org.kde.plasma.desktop-appletsrc. The section containing the settings for the tray bar should look similar to this; if the
iconSize field is not present, add it.
[Containments][General] extraItems=org.kde.plasma.mediacontroller,org.kde.plasma.battery,org.kde.plasma.printmanager,org.kde.plasma.bluetooth,org.kde.plasma.clipboard,org.kde.plasma.notifications,org.kde.plasma.networkmanagement,org.kde.plasma.devicenotifier hiddenItems=org.kde.ktp-contactlist,org.kde.plasma.battery knownItems=org.kde.plasma.mediacontroller,org.kde.plasma.battery,org.kde.plasma.printmanager,org.kde.plasma.bluetooth,org.kde.plasma.clipboard,org.kde.plasma.notifications,org.kde.plasma.networkmanagement,org.kde.plasma.devicenotifier shownItems=org.kde.plasma.notifications,org.kde.plasma.clipboard iconSize=2
Go to Settings Manager → Appearance → Fonts, and change the DPI parameter. The value of 180 or 192 seems to work well on Retina screens. To get a more precise number, you can use
xdpyinfo | grep resolution, and then double it.
To enlarge icons in system tray, right-click on it (aim for empty space / top pixels / bottom pixels, so that you will not activate icons themselves) → “Properties” → set “Maximum icon size” to 32, 48 or 64.
Has good support out of the box.
For E18, go to the E Setting panel. In Look → Scaling, you can control the UI scaling ratios. A ratio of 1.2 seems to work well for the native resolution of the MBPr 15" screen.
To verify that the X Server has properly detected the physical dimensions of your monitor, use the xdpyinfo utility from thepackage:
$ xdpyinfo | grep -B 2 resolution screen #0: dimensions: 3200x1800 pixels (423x238 millimeters) resolution: 192x192 dots per inch
This example uses inaccurate dimensions (423mm x 328mm, even though the Dell XPS 9530 has 346mm x 194mm) to have a clean multiple of 96 dpi, in this case 192 dpi. This tends to work better than using the correct DPI — Pango renders fonts crisper in i3 for example.
If the DPI displayed by xdpyinfo is not correct, see Xorg#Display size and DPI for how to fix it.
If you are not using a desktop environment such as KDE, Xfce, or other that manipulates the X settings for you, you can set the desired DPI setting manually via the
Xft.dpi variable in Xresources:
Xft.dpi: 180 Xft.autohint: 0 Xft.lcdfilter: lcddefault Xft.hintstyle: hintfull Xft.hinting: 1 Xft.antialias: 1 Xft.rgba: rgb
Make sure the settings are loaded properly when X starts, for instance in your
xrdb -merge ~/.Xresources (see Xresources for more information).
This will make the font render properly in most toolkits and applications, it will however not affect things such as icon size!
Xft.dpi at the same time as toolkit scale (e.g.
GDK_SCALE) may cause interface elements to be much larger than intended in some programs like firefox.
Since Qt 5.6, Qt 5 applications can be instructed to honor screen DPI by setting the
QT_AUTO_SCREEN_SCALE_FACTOR environment variable:
If automatic detection of DPI does not produce the desired effect, scaling can be set manually per-screen (
QT_SCREEN_SCALE_FACTORS) or globally (
QT_SCALE_FACTOR). For more details see the Qt blog post.
GDK 3 (GTK+ 3)
To scale UI elements by a factor of two:
To undo scaling of text:
Scaling of UI elements is not supported by the toolkit itself, however it's possible to generate a theme with elements pre-scaled for HiDPI display usingAUR.
To scale UI elements by a factor of 1.5:
For more details see https://phab.enlightenment.org/w/elementary/
Set a lower resolution for the framebuffer as explained in GRUB/Tips and tricks#Setting the framebuffer resolution.
Firefox should use the #GDK 3 (GTK+ 3) settings.
To override those, open Firefox advanced preferences page (
about:config) and set parameter
2 (or find the one that suits you better;
2 is a good choice for Retina screens).
If you use a HiDPI monitor such as Retina display together with another monitor, you can use AutoHiDPI add-on in order to automatically adjust
layout.css.devPixelsPerPx setting for the active screen. Also, since Firefox version 49, it auto-scales based on your screen resolution, making it easier to deal with 2 or more screens.
Chromium / Google Chrome
Chromium should use the #GDK 3 (GTK+ 3) settings.
To override those, use the
--force-device-scale-factor flag with a scaling value. This will scale all content and ui, including tab and font size. For example
Using this option, a scaling factor of 1 would be normal scaling. Floating point values can be used. To make the change permanent, for Chromium, you can add it to
If you use a HiDPI monitor such as Retina display together with another monitor, you can use the reszoom extension in order to automatically adjust the zoom level for the active screen.
Opera should use the #GDK 3 (GTK+ 3) settings.
To override those, use the
--alt-high-dpi-setting=X command line option, where X is the desired DPI. For example, with
--alt-high-dpi-setting=144 Opera will assume that DPI is 144. Newer versions of opera will auto detect the DPI using the font DPI setting (in KDE: the force font DPI setting.)
See #Firefox. To access
about:config, go to Edit → Preferences → Advanced → Config editor.
and change the "dpi" setting found in the "Graphics" tab. This only affects the font size.
The old legacy Skype (
qtconfig-qt4 to do it.
Spotify can be launched with a custom scaling factor, for example
$ spotify --force-device-scale-factor=1.5
Zathura document viewer
No modifications required for document viewing.
set font "monospace normal 20"
Sublime Text 3
Sublime Text 3 has full support for display scaling. Go to Preferences > Settings > User Settings and add
"dpi_scale": 2.0 to your settings (source).
IntelliJ IDEA 15 and above should include HiDPI support. If it does not work, the most convenient way to fix the problem in this case seems to be changing the Override Default Fonts setting:
- File -> Settings -> Behaviour & Appearance -> Appearance
The addition of
-Dhidpi=true to the vmoptions file in either
/usr/share/intelligj-idea-ultimate-edition/bin/ of release 14 should not be required anymore.
NetBeans allows the font size of its interface to be controlled using the
--fontsize parameter during startup. To make this change permanent edit the
/usr/share/netbeans/etc/netbeans.conf file and append the
--fontsize parameter to the
The editor fontsize can be controlled from Tools → Option → Fonts & Colors.
The output window fontsize can be controlled from Tools → Options → Miscelaneous → Output
Use a high DPI theme, or adjust
gtkrc of an existing theme. (Change all occurrences of the size
dialog, for example
There is also the gimp-hidpi.
The HiDPI-Steam-Skin can be installed to increase the font size of the interface. While not perfect, it does improve usability.
MetroSkin Unofficial Patch also helps with HiDPI on Steam with Linux.
Java applications using the AWT/Swing framework can be scaled by defining the sun.java2d.uiScale variable when invoking java. For example,
java -Dsun.java2d.uiScale=2 -jar some_application.jar
AUR can be used to scale applications (which uses AUR internally).
Another approach is to run the application full screen and without decoration in its own VNC desktop. Then scale the viewer. With Vncdesk (AUR) you can set up a desktop per application, then start server and client with a simple command such as
x11vnc has an experimental option
-appshare, which opens one viewer per application window. Perhaps something could be hacked up with that.
The HiDPI setting applies to the whole desktop, so non-HiDPI external displays show everything too large.
One workaround is to use xrandr's scale option. To have a non-HiDPI monitor (on DP1) right of an internal HiDPI display (eDP1), one could run:
xrandr --output eDP-1 --auto --output DP-1 --auto --scale 2x2 --right-of eDP-1
When extending above the internal display, you may see part of the internal display on the external monitor. In that case, specify the position manually, e.g. using this script.
You may run into problems with your mouse not being able to reach the whole screen. That is a known bug with an xserver-org patch (or try the panning option, but that might cause other problems).
An example of the panning syntax for a 4k laptop with an external 1920x1080 monitor to the right:
xrandr --output eDP-1 --auto --output HDMI-1 --auto --panning 3840x2160+3840+0 --scale 2x2 --right-of eDP-1
Generically if your HiDPI monitor is AxB pixels and your regular monitor is CxD and you are scaling by [ExF], the commandline for right-of is:
xrandr --output eDP-1 --auto --output HDMI-1 --auto --panning [C*E]x[D*F]+[A]+0 --scale [E]x[F] --right-of eDP-1
If panning is not a solution for you it may be better to set position of monitors and fix manually the total display screen.
An example of the syntax for a 2560x1440 WQHD 210 DPI laptop monitor (eDP1) using native resolution placed below a 1920x1080 FHD 96 DPI external monitor (HDMI) scaled to match global DPI settings:
xrandr --output eDP-1 --auto --pos 0x1458 --output HDMI-1 --scale 1.35x1.35 --auto --pos 0x0 --fb 2592x2898
The total screen size (--fb) and positioning (--pos) are to be calculated taking into account the scaling factor.
In this case laptop monitor (eDP1) has no scaling and uses native mode for resolution so it will total 2560x1440, but external monitor (HDMI) is scaled and it has to be considered a larger screen so (1920*1.35)x(1080*1.35) from where the eDP1 Y position came 1080*1.35=1458 and the total screen size: since one on top of the other X=(greater between eDP1 and HDMI, so 1920*1.35=2592) and Y=(sum of the calculated heights of eDP1 and HDMI, so 1440+(1080*1.35)=2898).
Generically if your hidpi monitor is AxB pixels and your regular monitor is CxD and you are scaling by [ExF] and hidpi is placed below regular one, the commandline for right-of is:
xrandr --output eDP-1 --auto --pos 0x(DxF) --output HDMI-1 --auto --scale [E]x[F] --pos 0x0 --fb [greater between A and (C*E)]x[B+(D*F)]
You may adjust the "sharpness" parameter on your monitor settings to adjust the blur level introduced with scaling.
If all you want is to mirror ("unify") displays, this is easy as well:
With AxB your native HiDPI resolution (for ex 3200x1800) and CxD your external screen resolution (for ex 1920x1200)
xrandr --output HDMI --scale [A/C]x[B/D]
In this example which is QHD (3200/1920 = 1.66 and 1800/1200 = 1.5)
xrandr --output HDMI --scale 1.66x1.5
For UHD to 1080p (3840/1920=2 2160/1080=2)
xrandr --output HDMI --scale 2x2
You may adjust the "sharpness" parameter on your monitor settings to adjust the blur level introduced with scaling.
The default Linux console font will be very small on hidpi displays, the largest font present in the package is
latarcyrheb-sun32 and other packages like contain further alternatives, such as
ter-132b(bold). See Fonts#Console fonts for configuration details.
After changing the font, it is often garbled and unreadable when changing to other virtual consoles (
tty2-6). To fix this you can force specific mode for KMS, such as
video=2560x1600@60 (substitute in the native resolution of your HiDPI display), and reboot.