Difference between revisions of "Honeyd"

From ArchWiki
Jump to: navigation, search
(Configuration)
Line 37: Line 37:
 
  10.0.0.0         255.0.0.0 <hostIPhere>
 
  10.0.0.0         255.0.0.0 <hostIPhere>
  
Open up 2 shells on your server. In the first shell, start the honeyd program:
+
Open up 2 shells on your server. In the first shell, start the honeyd program. In the second shell, use nc to connect to honeyd. The output should be as follows:
{{Command|name=honeyd -d -p /usr/share/honeyd/nmap.prints -f /root/default.conf 10.0.0.0/8}}
+
 
 +
{{Command|name=honeyd -d -p /usr/share/honeyd/nmap.prints -f default.conf 10.0.0.0/8
 +
|output=Honeyd V1.5c Copyright (c) 2002-2007 Niels Provos
 +
honeyd[3985]: started with -d -p /usr/share/honeyd/nmap.prints -f default.conf 10.0.0.0/8
 +
Warning: Impossible SI range in Class fingerprint "IBM OS/400 V4R2M0"
 +
Warning: Impossible SI range in Class fingerprint "Microsoft Windows NT 4.0 SP3"
 +
honeyd[3985]: listening promiscuously on eth0: (arp or ip proto 47 or (udp and src port 67 and dst port 68) or (ip and (net 10.0.0.0/8))) and not ether src 00:0d:56:37:52:ef
 +
honeyd[3985]: Demoting process privileges to uid 99, gid 99
 +
honeyd[3985]: Connection request: tcp (192.168.1.10:60109 - 10.0.0.1:23)
 +
honeyd[3985]: Connection established: tcp (192.168.1.10:60109 - 10.0.0.1:23) <-> /tmp/hello.sh
 +
honeyd[3985]: Connection dropped by reset: tcp (192.168.1.10:60109 - 10.0.0.1:23)
 +
^Choneyd[3985]: exiting on signal 2}}
  
 
=More Resources=
 
=More Resources=

Revision as of 06:22, 25 June 2009

Introduction

Honeyd is an open source computer program that allows a user to set up and run multiple virtual hosts on a computer network. These virtual hosts can be configured to mimic several different types of servers, allowing the user to simulate an infinite number of computer network configurations. Honeyd is primarily used in the field of computer security by professionals and hobbyists alike.

This page goes over how to get a simple setup up and running.

Installation

Install Honeyd from the AUR. Using yaourt:

[user@host ~]# yaourt -S honeyd

Configuration

Create these files:

Template:File

Template:File

On your firewall, add the following route:

Destination IP 	Netmask 	Gateway
10.0.0.0	        255.0.0.0	<hostIPhere>

Open up 2 shells on your server. In the first shell, start the honeyd program. In the second shell, use nc to connect to honeyd. The output should be as follows:

Template:Command

More Resources

http://www.honeyd.org/faq.php

http://en.wikipedia.org/wiki/Honeyd

http://ulissesaraujo.wordpress.com/2008/12/08/deploying-honeypots-with-honeyd/