Huawei E1550 3G modem

From ArchWiki
Revision as of 20:48, 7 March 2012 by Gnomeby (Talk | contribs) (Add one more tool)

Jump to: navigation, search

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.

Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어

External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی


This article describes how to configure Huawei E1550 3G modems.

This modem is generic modem device, but there are two kludges:

  • you need to switch it into modem mode
  • you need to load proper driver (usbserial)

Prepare device

Switch into modem mode

By default kernel recongnizes it as usb-storage device (SCSI CD-ROM). It is true, because of this modem contains MicroSD card (up to 4Gb) reader and internal flash.

To switch modem on you shoud run

$ /lib/udev/usb_modeswitch --vendor 0x12d1 --product 0x1446 --type option-zerocd


See also usb_modeswitch package in [community], which you may need in future since in udev-157 modem-modeswitch has been renamed and changed as described in the commit. This package does not need any modifications, just install it.

Also you can create udev's config: /etc/udev/rules.d/15-huawei-e1550.rules

 SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1", RUN+="/lib/udev/usb_modeswitch --vendor 0x12d1 --product 0x1446 --type option-zerocd"

After that, modem changes its USB IDs to 12d1:140c and /proc/bus/usb/devices shows new USB endpoints.

Driver loading

usbserial is proper driver for this modem, but probably it does not recognize it, so you shold force it, passing USB IDs.

 # modprobe usbserial vendor=0x12d1 product=0x140c

or put options into /etc/modprobe.d/modprobe.conf

 options usbserial vendor=0x12d1 product=0x140c

(do not forget to 'rmmod usbserial' if it is already loaded before)

Optional: device naming

You can rename ttyUSB port using following udev rules:

 UBSYSTEMS=="usb", ATTRS{modalias}=="usb:v12D1p1001*", KERNEL=="ttyUSB*", ATTRS{bInterfaceNumber}=="00", ATTRS{bInterfaceProtocol}=="ff", NAME="ttyUSB_utps_modem"
 SUBSYSTEMS=="usb", ATTRS{modalias}=="usb:v12D1p1001*", KERNEL=="ttyUSB*", ATTRS{bInterfaceNumber}=="01", ATTRS{bInterfaceProtocol}=="ff", NAME="ttyUSB_utps_diag"
 SUBSYSTEMS=="usb", ATTRS{modalias}=="usb:v12D1p1001*", KERNEL=="ttyUSB*", ATTRS{bInterfaceNumber}=="02", ATTRS{bInterfaceProtocol}=="ff", NAME="ttyUSB_utps_pcui"
 SUBSYSTEMS=="usb", ATTRS{modalias}=="usb:v12D1p1003*", KERNEL=="ttyUSB*", ATTRS{bInterfaceNumber}=="00", ATTRS{bInterfaceProtocol}=="ff", NAME="ttyUSB_utps_modem"
 SUBSYSTEMS=="usb", ATTRS{modalias}=="usb:v12D1p1003*", KERNEL=="ttyUSB*", ATTRS{bInterfaceNumber}=="01", ATTRS{bInterfaceProtocol}=="ff", NAME="ttyUSB_utps_pcui"

Connecting internet

Now you have new 2 or 3 /dev/ttyUSB* devices.Most likely first of them (ttyUSB0 if you had not such devices before) is PPP compatible modem. Use it as usual with pppd, kppp, gnome-ppp, network-manager, etc.

Note: If you want to use your 3G modem with network-manager, you have to install the package modemmanager (it's in the extra repository) and then restart the networkmanager (usually /etc/rc.d/networkmanager restart). Now you can 'Enable Mobile Broadband' in your networkmanager applet in GNOME

AT commands

There are some usefull commands:

  • AT^U2DIAG=0 - the device is only Modem
  • AT^U2DIAG=1 - device is in modem mode + CD ROM
  • AT^U2DIAG=255 - the device in modem mode + CD ROM + Card Reader
  • AT^U2DIAG=256 - the device in modem mode + Card Reader
  • AT+CPIN=<PIN-CODE> - enter PIN-code
  • AT+CUSD=1,<PDU-encoded-USSD-code>,15 - USSD request, result can be found (probably) in /dev/ttyUSB2.

Encode "*100#" to PDU format:

 perl -e '@a=split(//,unpack("b*","*100#")); for ($i=7; $i < $#a; $i+=8) { $a[$i]="" } print uc(unpack("H*", pack("b*", join("", @a))))."\n"'

Decode "AA180C3602" from PDU format:

 perl -e '@a=split(//,unpack("b*", pack("H*","AA180C3602"))); for ($i=6; $i < $#a; $i+=7) {$a[$i].="0" } print pack("b*", join("", @a)).""'

Answer decoding (this example is balance response: 151.25):

 perl -e 'print pack("H*", "003100350031002C003200350020044004430431002E0020");'

Some operators return USSD result in PDU encoding, so you should check proper decoding method.

  • AT+CSQ - get signal quality (AT+CSQ=?)
  • AT+GMI - get manufacturer
  • AT+GMM - get model
  • AT+GMR - get revision
  • AT+GMN - get IMEI
  • AT+COPS? - get operator info
  • AT^CARDLOCK="NCK-code" - unlock modem. NCK-code should be calculated by IMEI. After that modem can work with any GSM-provider.
  • AT^SYSCFG=mode, order, band, roaming, domain - System Config


  • 2 Automatic search
  • 13 2G ONLY
  • 14 3G ONLY
  • 16 No change


  • 0 Automatic search
  • 1 2G first, then 3G
  • 2 3G first, then 2G
  • 3 No change


  • 80 GSM DCS systems
  • 100 Extended GSM 900
  • 200 Primary GSM 900
  • 200000 GSM PCS
  • 400000 WCDMA IMT 2000
  • 3FFFFFFF Any band
  • 40000000 No change of band


  • 0 Not supported
  • 1 Roaming is supported
  • 2 No change


  • 0 CS_ONLY
  • 1 PS_ONLY
  • 2 CS_PS
  • 3 ANY
  • 4 No change

Sending SMS

You can use gammu.

Edit ~/.gammurc

 name=huawei e1550

The run command:

 gammu sendsms TEXT +7123456789 -text qwe

USSD Requests

Use huawei-ussd package. Or use ussd.php tool.

Success Stories

2010-August-03: I didn't do anything, I just installed usb_modeswitch-1.1.3-2 and my kernel is 2.6.33. In the syslog (/var/log/messages.log) the usb_modeswitch can automatically configure the modem correctly but I still cannot connect to the internet using gnome network manager applet, then I installed the modemmanager package and restart the networkmanager service. Everything is working properly now.