Difference between revisions of "Hybrid graphics"

From ArchWiki
Jump to: navigation, search
m (Solutions So Far)
(25 intermediate revisions by 5 users not shown)
Line 9: Line 9:
 
The laptop manufacturers developed new technologies involving two graphic cards in an single computer, enabling both high performance and power saving usages. This technology is well supported on Windows but it's still quite experimental with Linux distributions.
 
The laptop manufacturers developed new technologies involving two graphic cards in an single computer, enabling both high performance and power saving usages. This technology is well supported on Windows but it's still quite experimental with Linux distributions.
  
We call hybrid graphics a set of two graphic cards with different abilities and power consumptions. There are a variety of technologies and each manufacturer developed it's own solution to this problem. Here we try to explain a little about each approach and models and some community solutions to the lack of GNU/Linux systems support.
+
We call hybrid graphics a set of two graphic cards with different abilities and power consumptions. There are a variety of technologies and each manufacturer developed its own solution to this problem. Here we try to explain a little about each approach and models and some community solutions to the lack of GNU/Linux systems support.
  
 
== The "Old" Hybrid Model (Basic Switching) ==
 
== The "Old" Hybrid Model (Basic Switching) ==
Line 18: Line 18:
 
* Switch the multiplexer
 
* Switch the multiplexer
 
* Turn off the IGP
 
* Turn off the IGP
* Turn on agin the display
+
* Turn on again the display
 
This switch is somewhat rough and adds some blinks and black screens in laptops that could do it "on the fly". Later approaches made the transition a little more user-friendly.
 
This switch is somewhat rough and adds some blinks and black screens in laptops that could do it "on the fly". Later approaches made the transition a little more user-friendly.
  
Line 53: Line 53:
 
==== Current Problems ====
 
==== Current Problems ====
  
''To be filled''
+
The Dynamic Switch needs Xorg support for the discrete videocard assigned to rendering [http://www.x.org/wiki/RadeonFeature#fnref-e188f8b793017f6c1c15025dc3d042a1e560915e].
 +
 
 +
So, the method listed [https://wiki.archlinux.org/index.php/Hybrid_graphics#Solutions_So_Far here] (and the AUR package related) '''will not work''' until Xorg team add support for the redering on a second card not attached to video. See [https://blueprints.launchpad.net/ubuntu/+spec/desktop-p-hybrid-graphics here] for more info.
 +
 
 +
This means that with a muxless intel+ati design, you can't use your discrete card simply modprobing the module as listed down here.
 +
 
 +
As of now, there are 3 choices:
 +
 
 +
- Disable the discrete card and use only the intel one. In this case you can folow the instructions below to disable the radeon card.
 +
 
 +
- Test and improve some virtualGL based program to make the switch, like the common-amd branch of bumblebee project. Check the [https://github.com/Bumblebee-Project/Bumblebee/issues/52 project repository] and [http://forums.gentoo.org/viewtopic-t-909802.html this] useful post.
 +
 
 +
- Use the proprietary driver with powerxpress (a.k.a. pxp) support maintained by [https://wiki.archlinux.org/index.php/AMD_Catalyst#Installing_from_the_AUR Vi0l0] (remember to check for xorg compatibility).
  
 
==== Solutions So Far ====
 
==== Solutions So Far ====
 +
 +
{{Warning| This method, on a mux-less system, works only to shutdown the radeon card. This will not enable rendering on the radeon. See [https://wiki.archlinux.org/index.php/Hybrid_graphics#Current_Problems_2 Current Problems] section above for detail.
 +
 +
}}
  
 
Right now, the best solution is vga_switcheroo with combination of opensource drivers for your ATi and Intel graphics.
 
Right now, the best solution is vga_switcheroo with combination of opensource drivers for your ATi and Intel graphics.
Line 77: Line 93:
 
  # echo > /etc/modprobe.d/radeon.conf blacklist\ radeon
 
  # echo > /etc/modprobe.d/radeon.conf blacklist\ radeon
  
This will prevent system from hanging during boot. vga_switcheroo works only with radeon module loaded. To load radeon automatically on system startup open {{ic|/etc/rc.local}} and add line:
+
This will prevent system from hanging during boot. vga_switcheroo works only with radeon module loaded. To load radeon automatically on system startup open {{ic|/etc/profile.d/radeon.sh}} and add line:
  
 
  modprobe radeon
 
  modprobe radeon
  
optionally, you can turn off radeon right after system boot to save some battery energy and cool down your laptop. To do this, add following line to {{ic|/etc/rc.local}}:
+
optionally, you can turn off radeon right after system boot to save some battery energy and cool down your laptop. To do this, add following line to {{ic|/etc/profile.d/radeon.sh}}:
  
 
  # echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
 
  # echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
Line 88: Line 104:
  
 
  none            /sys/kernel/debug debugfs defaults 0 0
 
  none            /sys/kernel/debug debugfs defaults 0 0
 +
 +
 +
{{Note|{{ic|KMS}} must be activated for both cards, otherwise there will be no vgaswitcheroo in /sys/kernel/debug/ }}
  
 
* '''AUR method'''
 
* '''AUR method'''
 
Get it from: [https://aur.archlinux.org/packages.php?ID=51704 hybrid-video-ati-intel AUR package]
 
Get it from: [https://aur.archlinux.org/packages.php?ID=51704 hybrid-video-ati-intel AUR package]
 +
 +
=== Fully Power Down Discrete GPU ===
 +
 +
You may want to turn off the high-performance graphics processor to save battery power, this can be done by installing the the [https://aur.archlinux.org/packages/acpi_call-git/ acpi_call-git] package from the AUR.
 +
 +
Once installed load the kernel module:
 +
modprobe acpi_call
 +
 +
With the kernel module loaded run the following (requires root):
 +
turn_off_gpu.sh
 +
 +
This script will go through all the known data buses and attempt to turn them off. You will get an output similar to the following:
 +
Trying \_SB.PCI0.P0P1.VGA._OFF: failed
 +
Trying \_SB.PCI0.P0P2.VGA._OFF: failed
 +
Trying \_SB_.PCI0.OVGA.ATPX: failed
 +
Trying \_SB_.PCI0.OVGA.XTPX: failed
 +
Trying \_SB.PCI0.P0P3.PEGP._OFF: failed
 +
Trying \_SB.PCI0.P0P2.PEGP._OFF: failed
 +
Trying \_SB.PCI0.P0P1.PEGP._OFF: failed
 +
Trying \_SB.PCI0.MXR0.MXM0._OFF: failed
 +
Trying \_SB.PCI0.PEG1.GFX0._OFF: failed
 +
Trying \_SB.PCI0.PEG0.GFX0.DOFF: failed
 +
Trying \_SB.PCI0.PEG1.GFX0.DOFF: failed
 +
'''Trying \_SB.PCI0.PEG0.PEGP._OFF: works!'''
 +
Trying \_SB.PCI0.XVR0.Z01I.DGOF: failed
 +
Trying \_SB.PCI0.PEGR.GFX0._OFF: failed
 +
Trying \_SB.PCI0.PEG.VID._OFF: failed
 +
Trying \_SB.PCI0.PEG0.VID._OFF: failed
 +
Trying \_SB.PCI0.P0P2.DGPU._OFF: failed
 +
Trying \_SB.PCI0.P0P4.DGPU.DOFF: failed
 +
Trying \_SB.PCI0.IXVE.IGPU.DGOF: failed
 +
Trying \_SB.PCI0.RP00.VGA._PS3: failed
 +
Trying \_SB.PCI0.RP00.VGA.P3MO: failed
 +
Trying \_SB.PCI0.GFX0.DSM._T_0: failed
 +
Trying \_SB.PCI0.LPC.EC.PUBS._OFF: failed
 +
Trying \_SB.PCI0.P0P2.NVID._OFF: failed
 +
Trying \_SB.PCI0.P0P2.VGA.PX02: failed
 +
Trying \_SB_.PCI0.PEGP.DGFX._OFF: failed
 +
Trying \_SB_.PCI0.VGA.PX02: failed
 +
 +
See the "works"? This means the script found a bus which your GPU sits on and it has now turned off the chip. To confirm this, your battery time remaining should have increased. Currently, the chip will turn back on with the next reboot to get around this we do the following:
 +
 +
{{Note| To turn the GPU back on just reboot.}}
 +
 +
Add the kernel module to the array of modules to load at boot:
 +
 +
{{hc|/etc/modules-load.d/acpi_call.conf|
 +
#Load 'acpi_call.ko' at boot.
 +
 +
acpi_call}}
 +
 +
To turn off the GPU at boot we could just run the above script but honestly that is not very elegant so instead lets make use of systemd's tmpfiles.
 +
 +
{{hc|/etc/tmpfiles.d/acpi_call.conf|
 +
 +
w /proc/acpi/call - - - - \_SB.PCI0.PEG0.PEGP._OFF}}
 +
 +
The above config will be loaded at boot by systemd. What it does is write the specific OFF signal to the {{ic|/proc/acpi/call}} file. Obviously, replace the {{ic|\_SB.PCI0.PEG0.PEGP._OFF}} with the one which works on your system.
 +
 +
{{Note| After every kernel upgrade acpi_call-git will need to be reinstalled.}}
  
 
== See Also ==
 
== See Also ==

Revision as of 08:03, 24 May 2013

Tango-document-new.pngThis article is a stub.Tango-document-new.png

Notes: please use the first argument of the template to provide more detailed indications. (Discuss in Talk:Hybrid graphics#)

Hybrid-graphics is a concept involving two graphics cards on same computer, it was first designed to control power consumption in laptops and is extending to desktop computers as well

About Hybrid-graphics Technologies

The laptop manufacturers developed new technologies involving two graphic cards in an single computer, enabling both high performance and power saving usages. This technology is well supported on Windows but it's still quite experimental with Linux distributions.

We call hybrid graphics a set of two graphic cards with different abilities and power consumptions. There are a variety of technologies and each manufacturer developed its own solution to this problem. Here we try to explain a little about each approach and models and some community solutions to the lack of GNU/Linux systems support.

The "Old" Hybrid Model (Basic Switching)

This approach involves a two graphic card setup with a hardware multiplexer (MUX). It allows power save and low-end 3D rendering by using an Integrated Graphics Processor (IGP); or a major power consumption with 3D rendering performance using a Dedicated Graphics Processor (DGP). This model makes the user choose (at boot time or at login time) within the two power/graphics profiles and is almost fixed through all the user session. The switch is done by a similar workflow:

  • Turn off the display
  • Turn on the DGP
  • Switch the multiplexer
  • Turn off the IGP
  • Turn on again the display

This switch is somewhat rough and adds some blinks and black screens in laptops that could do it "on the fly". Later approaches made the transition a little more user-friendly.

The New Dynamic Switching Model

Most of the new Hybrid-graphics technologies involves two graphic cards as the basic switching but now the DGP and IGP are plugged to a framebuffer and there is no hardware multiplexer. The IGP is always on and the DGP is switched on/off when there is a need in power-save or performance-rendering. In most cases there is no way to use only the DGP and all the switching and rendering is controlled by software. At startup, the Linux kernel starts using a video mode and setting up low-level graphic drivers which will be used by the applications. Most of the Linux distributions then use X.org to create a graphical environment. Finally, a few other softwares are launched, first a login manager and then a window manager, and so on. This hierarchical system has been designed to be used in most of cases on a single graphic card.

Nvidia Optimus

Nvidia Optimus Whitepaper

Current Problems

  • Switching between cards when possible.
  • Switching on/off the discrete card.
  • Be able to use the discrete card for 3D render.
  • Be able to use both cards for 3D render (problem arised in this post).

Software Solutions So Far

  • asus_switcheroo -- a solution for Intel/Nvidia switching on ASUS and other laptops with a similar hardware mux -- by Alex Williamson
  • byo_switcheroo -- a solution to build your own handler (like acpi_call) to switch between cards with vga_switcheroo -- by Alex Williamson
  • vga_switcheroo -- the original GPU switching solution primarily for Intel/ATI notebooks -- by David Airlie
  • acpi_call -- allows you to switch off discrete graphics card to improve battery life -- by Michal Kottman
  • PRIME -- long-term Optimus solution in progress -- by David Airlie
  • Bumblebee -- allows you to run specific programs on the discrete graphic card, inside of an X session using the integrated graphic card. Works on Nvidia Optimus cards -- by Martin Juhl
  • hybrid-windump -- dump window using Nvidia onto Intel display -- by Florian Berger and Joakim Gebart

ATI Dynamic Switchable Graphics

This is a new technology similar to the one of Nvidia. There is no hardware multiplexer and gone into the market a few weeks/months ago.

Current Problems

The Dynamic Switch needs Xorg support for the discrete videocard assigned to rendering [1].

So, the method listed here (and the AUR package related) will not work until Xorg team add support for the redering on a second card not attached to video. See here for more info.

This means that with a muxless intel+ati design, you can't use your discrete card simply modprobing the module as listed down here.

As of now, there are 3 choices:

- Disable the discrete card and use only the intel one. In this case you can folow the instructions below to disable the radeon card.

- Test and improve some virtualGL based program to make the switch, like the common-amd branch of bumblebee project. Check the project repository and this useful post.

- Use the proprietary driver with powerxpress (a.k.a. pxp) support maintained by Vi0l0 (remember to check for xorg compatibility).

Solutions So Far

Warning: This method, on a mux-less system, works only to shutdown the radeon card. This will not enable rendering on the radeon. See Current Problems section above for detail.

Right now, the best solution is vga_switcheroo with combination of opensource drivers for your ATi and Intel graphics.

  • Manual method

Make sure you have installed drivers. Run in terminal:

$ pacman -Q | grep -E "xf86-video-ati|xf86-video-intel"

In case you get output similar to this:

xf86-video-ati 6.14.1-1
xf86-video-intel 2.15.0-2

you're good to go. In other case install drivers:

# pacman -S xf86-video-ati xf86-video-intel

DO NOT reboot your computer! In most cases system will not boot with both drivers installed. Blacklist radeon module:

# echo > /etc/modprobe.d/radeon.conf blacklist\ radeon

This will prevent system from hanging during boot. vga_switcheroo works only with radeon module loaded. To load radeon automatically on system startup open /etc/profile.d/radeon.sh and add line:

modprobe radeon

optionally, you can turn off radeon right after system boot to save some battery energy and cool down your laptop. To do this, add following line to /etc/profile.d/radeon.sh:

# echo OFF > /sys/kernel/debug/vgaswitcheroo/switch

In order to be able to access vgaswitcheroo add this line to your fstab:

none            /sys/kernel/debug debugfs defaults 0 0


Note: KMS must be activated for both cards, otherwise there will be no vgaswitcheroo in /sys/kernel/debug/
  • AUR method

Get it from: hybrid-video-ati-intel AUR package

Fully Power Down Discrete GPU

You may want to turn off the high-performance graphics processor to save battery power, this can be done by installing the the acpi_call-git package from the AUR.

Once installed load the kernel module:

modprobe acpi_call

With the kernel module loaded run the following (requires root):

turn_off_gpu.sh

This script will go through all the known data buses and attempt to turn them off. You will get an output similar to the following:

Trying \_SB.PCI0.P0P1.VGA._OFF: failed
Trying \_SB.PCI0.P0P2.VGA._OFF: failed
Trying \_SB_.PCI0.OVGA.ATPX: failed
Trying \_SB_.PCI0.OVGA.XTPX: failed
Trying \_SB.PCI0.P0P3.PEGP._OFF: failed
Trying \_SB.PCI0.P0P2.PEGP._OFF: failed
Trying \_SB.PCI0.P0P1.PEGP._OFF: failed
Trying \_SB.PCI0.MXR0.MXM0._OFF: failed
Trying \_SB.PCI0.PEG1.GFX0._OFF: failed
Trying \_SB.PCI0.PEG0.GFX0.DOFF: failed
Trying \_SB.PCI0.PEG1.GFX0.DOFF: failed
Trying \_SB.PCI0.PEG0.PEGP._OFF: works!
Trying \_SB.PCI0.XVR0.Z01I.DGOF: failed
Trying \_SB.PCI0.PEGR.GFX0._OFF: failed
Trying \_SB.PCI0.PEG.VID._OFF: failed
Trying \_SB.PCI0.PEG0.VID._OFF: failed
Trying \_SB.PCI0.P0P2.DGPU._OFF: failed
Trying \_SB.PCI0.P0P4.DGPU.DOFF: failed
Trying \_SB.PCI0.IXVE.IGPU.DGOF: failed
Trying \_SB.PCI0.RP00.VGA._PS3: failed
Trying \_SB.PCI0.RP00.VGA.P3MO: failed
Trying \_SB.PCI0.GFX0.DSM._T_0: failed
Trying \_SB.PCI0.LPC.EC.PUBS._OFF: failed
Trying \_SB.PCI0.P0P2.NVID._OFF: failed
Trying \_SB.PCI0.P0P2.VGA.PX02: failed
Trying \_SB_.PCI0.PEGP.DGFX._OFF: failed
Trying \_SB_.PCI0.VGA.PX02: failed

See the "works"? This means the script found a bus which your GPU sits on and it has now turned off the chip. To confirm this, your battery time remaining should have increased. Currently, the chip will turn back on with the next reboot to get around this we do the following:

Note: To turn the GPU back on just reboot.

Add the kernel module to the array of modules to load at boot:

/etc/modules-load.d/acpi_call.conf
#Load 'acpi_call.ko' at boot.

acpi_call

To turn off the GPU at boot we could just run the above script but honestly that is not very elegant so instead lets make use of systemd's tmpfiles.

/etc/tmpfiles.d/acpi_call.conf

w /proc/acpi/call - - - - \_SB.PCI0.PEG0.PEGP._OFF

The above config will be loaded at boot by systemd. What it does is write the specific OFF signal to the /proc/acpi/call file. Obviously, replace the \_SB.PCI0.PEG0.PEGP._OFF with the one which works on your system.

Note: After every kernel upgrade acpi_call-git will need to be reinstalled.

See Also