Difference between revisions of "I3/Beginners Customization Guide"

From ArchWiki
< I3
Jump to: navigation, search
m (Shutdown, Reboot, Lock Screen)
(Merged to i3)
Line 2: Line 2:
 
[[Category:Tiling WMs]]
 
[[Category:Tiling WMs]]
 
[[Category:Dynamic WMs]]
 
[[Category:Dynamic WMs]]
{{Merge|i3#Configuration|Either merge everything here or in the linked section.|section=Merge with i3?}}
 
This guide will assist you in your [[i3]] desktop customization.  If you are accustomed to using a full [[Desktop Environment]] like [[Gnome]], [[KDE]], or [[Xfce]] this will greatly help to ease the transition to i3.
 
 
== Configuration ==
 
 
=== i3statusbar ===
 
 
First we need to copy over the default configuration files that we will be working with to our home directory.
 
 
cp /etc/i3/config ~/.i3/config
 
cp /etc/i3status.conf ~/.i3status.conf
 
 
==== Network Interface Status ====
 
 
Now we can fix the status bar (i3status) at the bottom of the screen.  If you recently installed Arch Linux then you will be using the new systemd/udev [http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ Predictable Network Interface Naming scheme]. As a result we need to change the references for eth0 (ethernet) and wlan0 (wireless) to match your system. To view your available network interfaces use the command {{ic|ip link}}
 
 
Here is an example output of what you will see:
 
 
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
 
2: enp6s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
 
    link/ether aa:bb:cc:dd:ee:ff brd ff:ff:ff:ff:ff:ff
 
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT qlen 1000
 
    link/ether aa:bb:cc:dd:ee:ff brd ff:ff:ff:ff:ff:ff
 
 
From the example we can see that ethernet interface is labelled enp6s0 and the wireless interface is wilp3s0.  Your interface names may vary. Edit the file {{ic|~/.i3status.conf}}
 
 
Replace the lines:
 
 
order += "wireless wlan0"
 
order += "ethernet eth0"
 
wireless wlan0 {
 
wireless eth0 {
 
 
To match your corresponding network interface names:
 
 
order += "wireless wlp3s0"
 
order += "ethernet enp6s0"
 
wireless wlp3s0 {
 
ethernet enp6s0 {
 
 
{{Note|wlp3s0 and enp6s0 are only used as examples. Enter your own network interface names here.  If you are using eth0 and wlan0 then you do not need to change them.}}
 
 
==== Temperature Status ====
 
 
If you would like to add your CPU temperature to the i3status bar simply add these lines to {{ic|~/.i3status.conf}}
 
 
order += "cpu_temperature 0"
 
cpu_temperature 0 {
 
        format = "T: %degrees °C"
 
    max_threshold = 65
 
        path = "/sys/devices/platform/coretemp.0/temp1_input"
 
}
 
 
If the temperature column complains that it cannot get the temperature value then change the path line to:
 
 
path = "/sys/class/thermal/thermal_zone0/temp"
 
 
=== Volume Manager ===
 
 
To enable easy management of your system volume, you can install a volume manager applet such as {{AUR|pa-applet-git}} from the [[AUR]].  This should also allow you to use your keyboards volume up, volume down, and mute keys as well as using the applet directly to manage your volume.  Once it is installed add the following line to your {{ic|~/.i3/config}} to auto start the applet:
 
 
exec /usr/bin/pa-applet
 
 
=== Network Manager ===
 
 
If you would like to use {{Pkg|network-manager-applet}} to manage your network connections, follow the instructions in [[NetworkManager]].
 
 
Then add the the following line to your {{ic|~/.i3/config}} to automatically start the Network Manager applet in your system tray
 
 
exec /usr/bin/nm-applet
 
 
=== Workspace Names ===
 
 
Although it is not required, many people prefer naming frequently used workspaces. First you need to determine which monitor you want the workspace to open to. Simply type {{ic|xrander}} into a terminal and it will show you the available display ports. Some common ones are LVDS1 for laptops or VGA1, HDMI1, HDMI2, etc for external monitors. If you are using [[Multihead#Xinerama|Xinerama]] instead use the outputs xinerama-0, xinerama-1, etc.  Add your workspace names to {{ic|~/.i3/config}} You also need to modify the corresponding lines to switch to your workspaces as well as moving focused containers to those workspaces.
 
 
# Workspace names
 
workspace "1:Web" output LVDS1
 
workspace "2:Mail" output LVDS1
 
workspace "3:Irc" output LVDS1
 
workspace "4:Shell" output LVDS1
 
 
# switch to workspace
 
bindsym $mod+1 workspace 1:Web
 
bindsym $mod+2 workspace 2:Mail
 
bindsym $mod+3 workspace 3:Irc
 
bindsym $mod+4 workspace 4:Shell
 
 
# move focused container to workspace
 
bindsym $mod+Shift+1 move container to workspace 1:Web
 
bindsym $mod+Shift+2 move container to workspace 2:Mail
 
bindsym $mod+Shift+3 move container to workspace 3:Irc
 
bindsym $mod+Shift+4 move container to workspace 4:Shell
 
 
=== Launching programs on specific workspaces ===
 
 
To maximize efficiency you can setup certain programs to automatically launch to a specific workspace.  This can be accomplished one of two ways. You could use the {{ic|assign}} command so when you manually launch a program it is directed to a the workspace you assigned. An example would be:
 
 
# Assign URxvt terminals to workspace 2
 
assign [class="URxvt"] 2
 
 
Or if you have renamed the workspaces like the above examples then you must set the new workspace name instead of the number:
 
 
# Assign URxvt terminals to workspace 4:Shell
 
assign [class="URxvt"] 4:Shell
 
 
{{Note|To be able to determine the class, title, instance, etc of an open window you can use the tool {{ic|xprop}} by installing the package {{Pkg|xorg-xprop}} from the Extra repository.}}
 
 
Alternatively you can change to your target workspace with {{ic|i3-msg}} then have your frequently used programs start automatically with the {{ic|exec}} command:
 
 
exec --no-startup-id i3-msg 'workspace 1:Web; exec /usr/bin/firefox'
 
exec --no-startup-id i3-msg 'workspace 2:Mail; exec urxvt -name Mail -e /usr/bin/mutt'
 
exec --no-startup-id i3-msg 'workspace 3:Irc; exec /usr/bin/urxvt -name irssi -e /usr/bin/irssi'
 
exec --no-startup-id i3-msg 'workspace 4:Shell; exec /usr/bin/urxvt'
 
 
=== Desktop Wallpaper ===
 
 
To be able to manage the desktop wallpaper, you need a lightweight image viewer like [[Feh]] or [[Nitrogen]].  Install feh with the command {{ic|# pacman -S feh}}. Then you can set your wallpaper with the following command:
 
 
$ feh --bg-scale /path/to/image.file
 
 
To have feh set your image to the Desktop Wallpaper add the following line to your {{ic|~/.i3/config}}
 
 
exec --no-startup-id sh ~/.fehbg
 
 
=== Terminal Emulator ===
 
 
By default when you press $mod+Return it launches the i3-sensible-terminal which is a script that invokes a terminal.  It attempts to start one of these terminals in the following order: $TERMINAL urxvt rxvt terminator Eterm aterm xterm gnome-terminal roxterm xfce4-terminal.  You can force it to launch your terminal of choice by modifying the line {{ic|bindsym $mod+Return exec i3-sensible-terminal}}
 
 
=== Scratchpad ===
 
 
Having a scratchpad to jot down or paste notes quickly is very handy!  i3 has a feature that allows you to move a window to a scratchpad workspace. Basically it will be hidden from view until you recall it with the {{ic|scratchpad show}} command. To send a focused window to the scratchpad with $mod+Shift+minus or to recall it with $mod+minus enter these lines into your {{ic|~/.i3/config}}
 
 
# Make the currently focused window a scratchpad
 
bindsym $mod+Shift+minus move scratchpad
 
 
# Show the first scratchpad window
 
bindsym $mod+minus scratchpad show
 
 
You can start your favorite editor (ie Gedit, vim, nano, etc) on startup and have it automatically moved to the scratchpad workspace to quickly recall it when needed. The following example when placed in {{ic|~/.i3/config}} shows how you can start the urxvt terminal, have it launch the nano editor, and then move it to the scratchpad:
 
 
# starting a specially named term automatically
 
exec --no-startup-id urxvt -name scratchpad -e /usr/bin/nano
 
# move this to scratchpad, if active
 
for_window [class="URxvt" instance="scratchpad"] move scratchpad
 
 
== Shutdown, Reboot, Lock Screen ==
 
As there are no Shutdown, Reboot, or Lock Screen buttons, we can add some hotkey combinations to help us out.  First we need to create this script and save it as {{ic|i3exit}}.  Remember to make it executable with {{ic|chmod +x}} and to place it somewhere in your $PATH.
 
 
#!/bin/sh
 
lock() {
 
    i3lock
 
}
 
 
case "$1" in
 
    lock)
 
        lock
 
        ;;
 
    logout)
 
        i3-msg exit
 
        ;;
 
    suspend)
 
        lock && systemctl suspend
 
        ;;
 
    hibernate)
 
        lock && systemctl hibernate
 
        ;;
 
    reboot)
 
        systemctl reboot
 
        ;;
 
    shutdown)
 
        systemctl poweroff
 
        ;;
 
    *)
 
        echo "Usage: $0 {lock|logout|suspend|hibernate|reboot|shutdown}"
 
        exit 2
 
esac
 
 
exit 0
 
 
Now add the following lines to your {{ic|~/.i3/config}} Once completed you will be presented with a prompt whenever you press $mod+pause.
 
 
set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
 
mode "$mode_system" {
 
    bindsym l exec --no-startup-id i3exit lock, mode "default"
 
    bindsym e exec --no-startup-id i3exit logout, mode "default"
 
    bindsym s exec --no-startup-id i3exit suspend, mode "default"
 
    bindsym h exec --no-startup-id i3exit hibernate, mode "default"
 
    bindsym r exec --no-startup-id i3exit reboot, mode "default"
 
    bindsym Shift+s exec --no-startup-id i3exit shutdown, mode "default" 
 
 
    # back to normal: Enter or Escape
 
    bindsym Return mode "default"
 
    bindsym Escape mode "default"
 
}
 
bindsym $mod+Pause mode "$mode_system"
 
 
== Screensaver and Power Management ==
 
 
You can use [[Display_Power_Management_Signaling|DPMS]] to blank your screen or to suspend/poweroff your monitor. Adding the following line to your {{ic|~/.i3/config}} will suspend your monitor after 10 minutes.
 
 
exec --no-startup-id xset dpms 600
 

Revision as of 04:57, 29 August 2013