Difference between revisions of "IBM ThinkPad T61"

Revision as of 11:59, 31 August 2013

This article or section is a candidate for merging with Lenovo Thinkpad T61.

Notes: please use the second argument of the template to provide more detailed indications. (Discuss in Talk:IBM ThinkPad T61#)

Wireless

Intel 4965 WiFi

If you have the Intel 4965 NIC, simply install iwlwifi-4965-ucode, run depmod, and run "modprobe iwl4965" to activate. For wpa_supplicant, use the WEXT driver, not the deprecated ipw200.

The latest Kismet runs well on the iwl4965, but occasionally has problems changing the mode back to Managed from Monitor.

If you have the AR5212 802.11abg NIC all you need is madwifi. Install it, and the kernel module is ath_pci.

Xorg

Synaptic

Works great with the settings provided in the Pacman output

Graphics

Nvidia

Driver works great, even with composite enabled.

Intel

Don't have it, so cannot say.

xf86-video-intel from testing should support the Intel video. I haven't tried it yet, but I'll report back when I do.

Power Management

ACPI

Install acpi, acpid. Add acpid to the daemons list. Load module thinkpad_acpi. You might have to blacklist asus_acpi/toshiba_acpi, it doesn't hurt anyway. It should work, and is able to provide accurate information to such programs as Conky and GKrellm, as well as the GNOME battery monitor.

SpeedStep

The regular way works fine.

Suspend/Resume

Suspend/Resume technically worked out of the box for me, however resuming took about 2+ minutes, while my screen stayed off and my speaker beeped 2-3 times. Sometimes it hung up too. These changes seemed to have worked for me and where found here. Remember to remove the boot parameters acpi_sleep=s3_bios or acpi_sleep=s3_mode if you have them, they do not seem to be needed anymore and may cause the system to crash on resume.

Thinkvantage Rescue and Recovery

The Rescue and Recovery partition can be /dev/sda1 or /dev/sda2, not sure which this depends on

The following GRUB entry did work on my T61

     title ThinkPad Rescue and Recovery
     rootnoverify    (hd0,0)
     chainloader     +1

Fingerprint Reader

Install Thinkfinger

pacman -S thinkfinger

Update PAM configuration to accept thinkfinger as auth input. See Thinkfinger Configuration

Sound

The module is snd-hda-intel. It works, albeit with several unresolved quirks. The mute button works partially out of the box (it can mute but not unmute.) To unmute, press either the volume up or volume down buttons. However, one workaround is enabling the volume up/down buttons as Keyboard shortcuts in your Desktop environment.

--Edit: Since Kernel 2.6.25 the mute/unmute function works out of the box. Now it unmutes also!

--Edit: To enable sound you must unmute the internal speaker channel, and turn down or mute the microphone channels, otherwise you will get nothing but a squeaking sound from the speaker.

--Edit: On my t61 sounds did not work till I added "snd-hda-codec-analog" to the modules, recompiled the modules (sudo mkinitcpio -p linux) and restarted.

HDAPS

See HDAPS.

Built-in Camera

Install the linux-uvc-svn on community, version 211-1 is workable

Multimedia Keys

Use pacman to install xmodmap (xmodmap is included in the xorg-server-utils package), then create a text file ~/.Xmodmap and put this in it:

these are for the pager buttons

 keycode 234 = XF86Back
 keycode 233 = XF86Forward

these are the music changing buttons:

 keycode 144 = XF86AudioPrev
 keycode 164 = XF86AudioStop
 keycode 162 = XF86AudioPlay
 keycode 153 = XF86AudioNext

this is for the silver volume buttons:

 keycode 160 = XF86AudioMute
 keycode 174 = XF86AudioLowerVolume
 keycode 176 = XF86AudioRaiseVolume

based on which Desktop environment you are in you will have to edit your hotkeys to get it working, if you are in a WM that doesn't provide this functionality, try installing xbindkeys

XFCE

Assuming you are using alsa, open the XFCE keyboard configuragtion GUI (XFCE Menu > Settings > Keyboard) and add the following to the 'Application Shortcuts' tab. When prompted press the appropriate multimedia key.

Mute

 amixer -q set Master toggle

Volume Down

 amixer -q set PCM 2- unmute

Volume Up

 amixer -q set PCM 2+ unmute

The previous two will adjust the PCM value by 2, if you desire you can change this number.

@@ Line 1: / Line 1: @@
-[[Category:IBM (English)]]
+[[Category:IBM]]
 {{merge|Lenovo Thinkpad T61}}
-==Detect hardware by hwdetect==
-  hwdetect --modules  # add these data into /etc/rc.conf
-This step will save much work on following sections.
-on my T61, here is the listing by hwdetect 0.9-1
-  MODULES=(ac battery bay button dock processor thermal video wmi cdrom \
-    agpgart intel-agp nvram firewire-core firewire-ohci i2c-i801 i2c-core \
-    evdev joydev pcspkr psmouse serio_raw compat_ioctl32 uvcvideo v4l1-compat \
-    videodev thinkpad_acpi pci_hotplug shpchp rtc-cmos rtc-core rtc-lib nvidia \
-    output crc-itu-t snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc \
-    snd-pcm snd-timer snd snd-hda-intel soundcore pata_acpi ata_generic \
-    scsi_mod ahci ata_piix e1000e mac80211 iwl4965 cfg80211 pcmcia_core \
-    rsrc_nonstatic yenta_socket usbcore ehci-hcd uhci-hcd firewire-core \
-    firewire-ohci ieee1394 ohci1394 sd_mod sr_mod)
-==SATA and Linux==
-If there are boot problems, try going from AHCI to compatibility in the BIOS.  I do not really know what is going on here, but my computer works in compatibility, I haven't tried AHCI.
-AHCI works with the latest arch release.
 ==Wireless==
 ===Intel 4965 WiFi===
@@ Line 30: / Line 10: @@
 ==Xorg==
-===Widescreen===
-Hwd did not do the monitor widescreen (1280x800) properly, and it was instead doing 1024x768.  In xorg.conf, here is the relevant section:
- Section "Screen"
-        Identifier "Screen0"
-        Device     "Card0"
-         Monitor    "Monitor0"
-        DefaultColorDepth 24
-        SubSection "Display"
-                Depth     24
-                Modes "1280x800"
-        EndSubSection
- EndSection
-For the framebuffer in /boot/grub/menu.lst, I just used vga=773 and it doesn't look too bad.  It freaks out with the vga=871 or whatever number you need for widescreen.  (Note from reader who owns new T61:  This is because the hex calculation presented at first is not what you need.  1280x800 requires "vga=865" at the end of the "kernel ..." line in menu.lst; I put that in instead and it works fine.  If things are okay you do not really need that much more real estate in the text session, but if anything isn't working when you're setting up the system I find it nice to be able to fit more text on the screen.)
-The Nvidia driver has it's own way of doing resolution, but I didn't find any conflict between the xorg setting and nvidia setting, so it really doesn't matter.  I think the nvidia trumps the xorg.conf, though.  (Another note from reader:  I did not find that the above modification was needed.  Run "Xorg --configure" and "nvidia-xconfig."  That will put an "xorg.conf" in /etc/X11 and another conf file with a different name in the /root directory.  If you look at the contents of the two files and just edit the one from the root directory until instances of 'type 1' and 'dri' are commented out, then move it to the /etc/X11 directory, rename the original xorg.conf so it won't be noticed, and then call the edited conf file xorg.conf, you should be okay.)
 ===Synaptic===
 Works great with the settings provided in the Pacman output
@@ Line 53: / Line 16: @@
 ===Nvidia===
 Driver works great, even with composite enabled.
-====Tweaks====
-When I have time
 ===Intel===
 Don't have it, so cannot say.
@@ Line 73: / Line 33: @@
 Suspend/Resume technically worked out of the box for me, however resuming took about 2+ minutes, while my screen stayed off and my speaker beeped 2-3 times. Sometimes it hung up too. These changes seemed to have worked for me and where found [https://bugs.launchpad.net/ubuntu/+source/hal-info/+bug/235284 here].
 Remember to remove the boot parameters acpi_sleep=s3_bios or acpi_sleep=s3_mode if you have them, they do not seem to be needed anymore and may cause the system to crash on resume.
-====T61p nvidia graphics and the proprietary driver====
-(You do not need to do the following any more if you have hal-info 0.20080508-1 or newer.)
-In /usr/share/hal/fdi/information/10freedesktop/20-video-quirk-pm-lenovo.fdi, change line 51 from:
- <merge key="power_management.quirk.s3_bios" type="bool">true</merge>
- <merge key="power_management.quirk.vbemode_restore" type="bool">true</merge>
-to
- <merge key="power_management.quirk.s3_bios" type="bool">false</merge></math>
- <merge key="power_management.quirk.vbemode_restore" type="bool">true</merge>
-====For the T61 with 140M and proprietary driver: ====
-The above should probably work here too but is currently untested.  If there's still breakage, try making the same changes to line 46.
-Tested the T61 with suspend with the Nvidia 140M the above changes fix the suspend problem, but the wireless stops working, my fix right now is to
-   $ sudo modprobe -r ath_pci
-   $ sudo modprobe ath_pci
 ==Thinkvantage Rescue and Recovery==
 The Rescue and Recovery partition can be /dev/sda1 or /dev/sda2, not sure which this depends on
@@ Line 111: / Line 54: @@
 --Edit: To enable sound you must unmute the internal speaker channel, and turn down or mute the microphone channels, otherwise you will get nothing but a squeaking sound from the speaker.
+--Edit: On my t61 sounds did not work till I added "snd-hda-codec-analog" to the modules, recompiled the modules (sudo mkinitcpio -p linux) and restarted.
 ==HDAPS==
-Note: this information is out of date for 2.6.28 and newer kernels. See the [http://wiki.archlinux.org/index.php/HDAPS HDAPS wiki page] and follow the directions there.
+See [[HDAPS]].
-Install the the Kernel(kernel26tp) from [https://aur.archlinux.org/packages.php?ID=14973 AUR] and add it into your bootloader menu.
-Boot the new Kernel.
-Install [https://aur.archlinux.org/packages.php?ID=5401 hdapsd] and [https://aur.archlinux.org/packages.php?ID=3985 tp_smapi] from AUR.
-Load the Modules:
- modprobe tp_smapi
- modprobe hdaps
-Start the hdaps daemon:
- hdapsd -d sda -s 15
 ==Built-in Camera==