IBM ThinkPad T61
Intel 4965 WiFi
If you have the Intel 4965 NIC, simply install iwlwifi-4965-ucode, run depmod, and run "modprobe iwl4965" to activate. For wpa_supplicant, use the WEXT driver, not the deprecated ipw200.
The latest Kismet runs well on the iwl4965, but occasionally has problems changing the mode back to Managed from Monitor.
If you have the AR5212 802.11abg NIC all you need is madwifi. Install it, and the kernel module is ath_pci.
Works great with the settings provided in the Pacman output
Driver works great, even with composite enabled.
Don't have it, so cannot say.
- from testing should support the Intel video. I haven't tried it yet, but I'll report back when I do.
Install acpi, acpid. Add acpid to the daemons list. Load module thinkpad_acpi. You might have to blacklist asus_acpi/toshiba_acpi, it doesn't hurt anyway. It should work, and is able to provide accurate information to such programs as Conky and GKrellm, as well as the GNOME battery monitor.
The regular way works fine.
Suspend/Resume technically worked out of the box for me, however resuming took about 2+ minutes, while my screen stayed off and my speaker beeped 2-3 times. Sometimes it hung up too. These changes seemed to have worked for me and where found here. Remember to remove the boot parameters acpi_sleep=s3_bios or acpi_sleep=s3_mode if you have them, they do not seem to be needed anymore and may cause the system to crash on resume.
Thinkvantage Rescue and Recovery
The Rescue and Recovery partition can be /dev/sda1 or /dev/sda2, not sure which this depends on
The following GRUB entry did work on my T61
title ThinkPad Rescue and Recovery rootnoverify (hd0,0) chainloader +1
The module is snd-hda-intel. It works, albeit with several unresolved quirks. The mute button works partially out of the box (it can mute but not unmute.) To unmute, press either the volume up or volume down buttons. However, one workaround is enabling the volume up/down buttons as Keyboard shortcuts in your Desktop environment.
--Edit: Since Kernel 2.6.25 the mute/unmute function works out of the box. Now it unmutes also!
--Edit: To enable sound you must unmute the internal speaker channel, and turn down or mute the microphone channels, otherwise you will get nothing but a squeaking sound from the speaker.
--Edit: On my t61 sounds did not work till I added "snd-hda-codec-analog" to the modules, recompiled the modules (sudo mkinitcpio -p linux) and restarted.
See Webcam Setup.