Difference between revisions of "IBM ThinkPad X31"
(→Xorg and direct rendering)
|Line 62:||Line 62:|
You can boost
You can boost performance by using this ~/.drirc:
|Line 85:||Line 85:|
If you wish to your dri configuration, install driconf.
Revision as of 19:17, 6 February 2010
The IBM Thinkpad X31 is a wonderful little laptop which contains everything you need for your everyday work, and even some gaming, if you tweak things a little. The X31 is rock solid, light (3.7 lbs), and nowadays very cheap. The only drawback is the lack of internal optical drive.You can see the specs of the X31 on ThinkWiki, a wonderful resource with additional informations.
A basic Arch Linux installation will do just fine for about everything, so I won't talk about sound or other basic stuff. No custom kernel needed. However, you will need the following particular packages:
- ipw2100-fw and wireless_tools for wireless
- xf86-video-ati for direct rendering (see above)
- uswsusp for hibernation (see above)
The following useful packages are in the AUR.
- rovclock for boosting direct rendering (see above)
Simply save this script as /usr/bin/hibernation:
#!/bin/bash modprobe -r ehci_hcd /usr/sbin/s2ram -rf modprobe ehci_hcd
You now just have to run this command whenever you want to suspend to ram:
To hibernate and resume simply by closing the lid of your laptop, simply run this command:
# echo -e "event=button[ /]lid\naction=/usr/bin/hibernation" > /etc/acpi/events/suspend.conf
It simply tells ACPI to run the command "hibernation" on the "lid closed" event.
Note for those with resume issues after updating to kernel >=2.6.31: disable kernel modesetting by appending "nomodeset" to your kernel parameters. --Tad 05:51, 19 October 2009 (EDT)
Xorg and direct rendering
This section assumes the ATI Radeon Mobility M6 LY video card. This can be verified using:
$ lspci | grep Mobility
You can also overclock your graphic card. As far as I know, there is no real drawback, but you can play it safe and only use it while running a game or compiz or any application using your graphic card:
# rovclock -c 220 -m 210
Use this command to get back to default settings:
# rovclock -c 144 -m 144
If you what to enable it permanently, you just have to add the first command in your ~/.xinitrc, or use any other way to run it once X is started. If, however, you barely use your graphic card, you can lower both power usage and temperature slightly by underclocking your graphic card at boot. Add this command to ~/.xinitrc :
# rovclock -c 90 -m 100
If you want to use an external screen for a presentation or as an extended desktop, you can use xrandr. For an extended desktop, you should first add one line in your /etc/x11/xorg.conf configuration file at the SubSection "Display" area: Before:
SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection
SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" Virtual 2304 1024 EndSubSection
The numbers are the total rectangular resolution that you need to use. In this case, I'm using the internal 1024x768 screen and an external 1280x1024 screen on the right. The total resolution is 1024+1280=2304 pixels large and 1024>768=1024 pixels height.
Note that in 24 bits with this option, the performance is affected for 3D drawing, so you may need to comment it and use only one screen when you need the graphical power.
Then restart your X server (ctrl-alt-backspace). You can issue this command in a shell:
xrandr --output VGA-0 --right-of LVDS
To find the exact name of the monitors and the maximum resolution that you set up in the configuration file, you can type just xrandr without arguments.
Here are various method to save power:
This will put your screen brightness to the minimum level when on battery and restore it to maximum when on ac power:
# echo -e '#!/bin/bash\necho 0 > /sys/class/backlight/thinkpad_screen/brightness' > /etc/laptop-mode/batt-start/battscript # chmod 0755 /etc/laptop-mode/batt-start/battscript # echo -e '#!/bin/bash\necho 7 > /sys/class/backlight/thinkpad_screen/brightness' > /etc/laptop-mode/lm-ac-start/acscript # chmod 0755 /etc/laptop-mode/lm-ac-start/acscript # ln -s /etc/laptop-mode/lm-ac-start/acscript /etc/laptop-mode/onlm-ac-start/acscript
It will create scripts, executed by the laptop-mode daemon when switching the power source, that change the brightness of your screen using the thinkpad_acpi module.
The X31 CPUs can be undervolted, which means they will offer you the same performance, but with more battery life and a cooler laptop. From personal experience, my CPU temperature,during 100% activity, dropped by 15-20°C just by using this patch. This is extremely easy using the linux-phc patch, but only if you know the proper values to give the CPU. Informations on how to find them is available here or here. I know it can be hard to find your own values, so here is a table were you can indicate what are the good values for each of the X31 CPUs:
- Pentium-m 1600MHz : 34 26 18 12 8 5
Please note you computer may freeze once a month because of those values. If you find more stable ones, please indicate them.
One you have your values, just run:
# echo VALUES > /sys/devices/system/cpu/cpu0/cpufreq/phc_vids
# echo 34 26 18 12 8 5 > /sys/devices/system/cpu/cpu0/cpufreq/phc_vids
You can add this command to your /etc/rc.local to make the undervolting permanent.
Put those line in your /etc/modprobe.conf:
options usbcore autosuspend=1 options ipw2100 associate=0 options snd_ac97_codec power_save=1 options thinkpad-acpi experimental=1 fan_control=1
The three first lines put some of your devices in power-saving mode, respectively the USB ports, the wireless card and the sound card. Note that you need the last line in order to control your fan speed (see above)
To see additional sources of power drain, install powertop:
# pacman -S powertop
And run it while on battery power.
Hard drive dilemna
As set earlier, the hard drive is on a power-saving mode that can make it spin off and on often. It may reduce its lifetime. You can install the smartmontools package and issue this command:
# smartctl -A /dev/sda | grep Load_Cycle_Count
If the number is growing too fast, you might want to set off the powersaving mode by issuing:
# hdparm -B 254 /dev/sda
See the above item rc.local to modify it at boot time.
# chmod 0755 tp-fancontrol # mv tp-fancontrol /usr/bin
To run the script at each boot, add this line to your /etc/rc.local:
Also, I suggest changing the first maximum temperature threshold (the CPU one) to 55. Just edit /usr/bin/tp-fancontrol, the file is self-explanatory.
Wireless and WPA
If you have the Cisco neta504 wifi card, it's a bit tricky to use the wpa encryption with it. Firstofall, remove and blacklist the airo and the airo_cs modules in your /etc/rc.conf remove the module airo from the kernel
# rmmod airo # rmmod airo_cs
then install ndiswrapper
# pacman -S ndiswrapper
download the neta504 driver for windows and unpack it (Be sure that you have unpacked the whole driver !) Then run :
# ndiswrapper -i /path/to/your/dir/netA504.inf
Save the ndiswrapper conf file :
# ndiswrapper -m # ndiswrapper -ma # ndiswrapper -mi
Now you can add to your kernel the module :
# modprobe ndiswrapper
and voilà ! I've tried this with wicd and it works flawlessly !
To enable the audio keys interfacing with ALSA, add:
event=ibm/hotkey HKEY 00000080 * action=/etc/acpi/soundkey.sh %e
to /etc/acpi/events/soundkey, and:
#!/bin/bash echo here > /tmp/fish echo $4 >> /tmp/fish case "$4" in 00001015) amixer -c 0 set Master playback unmute amixer -c 0 set Master playback 3%+ ;; 00001016) amixer -c 0 set Master playback unmute amixer -c 0 set Master playback 3%- ;; 00001017) amixer -c 0 set Master playback mute ;; esac
to /etc/acpi/soundkey.sh, and chown 755 it.
You'll also need to add:
echo enable,0xffffffff >/proc/acpi/ibm/hotkey
to /etc/rc.local or somewhere similiar for the events to be recognised.