IBM ThinkPad X31

From ArchWiki
Revision as of 09:55, 30 July 2010 by Changaco (Talk | contribs) (orthograph; format; templates; fixed reference to /etc/modprobe.conf; links to xprofile, xrandr and Xorg Input Hotplugging)

Jump to: navigation, search

The IBM Thinkpad X31 is a wonderful little laptop which contains everything you need for your everyday work, and even some gaming, if you tweak things a little. The X31 is rock solid, light (3.7 lbs), and nowadays very cheap. The only drawback is the lack of internal optical drive.You can see the specs of the X31 on ThinkWiki, a wonderful resource with additional informations.


A basic Arch Linux installation will do just fine for about everything, so I won't talk about sound or other basic stuff. No custom kernel needed. However, you will need the following particular packages:

The following useful packages are in the AUR.


Create the following file and make it executable: Template:File

You now just have to run this command whenever you want to suspend to ram:

# hibernation

To hibernate and resume simply by closing the lid of your laptop, simply run this command:

# echo -e "event=button[ /]lid\naction=/usr/bin/hibernation" > /etc/acpi/events/suspend.conf

It simply tells ACPI to run the command "hibernation" on the "lid closed" event.

Note for those with resume issues after updating to kernel >=2.6.31: disable kernel modesetting by appending "nomodeset" to your kernel parameters. --Tad 05:51, 19 October 2009 (EDT)

Xorg and direct rendering

This section assumes the ATI Radeon Mobility M6 LY video card. This can be verified using:

$ lspci | grep Mobility

Here is a minimal Template:Filename, optimized for performance: Template:File

Note: This configuration disables compositing to improve performance. If you need this feature, set Template:Codeline to Template:Codeline. Also, if you want to use Xorg Input Hotplugging, set Template:Codeline to Template:Codeline.


You can boost dri rendering performance by creating this file: Template:File

If you wish to modify your dri configuration, install Template:Package Official.


You can also overclock your graphic card. As far as I know, there is no real drawback, but you can play it safe and only use it while running a game or compiz or any application using your graphic card:

rovclock -c 220 -m 210

Use this command to get back to default settings:

rovclock -c 144 -m 144

If you want to enable it permanently, add the first command in xprofile.

If, on the contrary, you barely use your graphic card, you can lower both power usage and temperature slightly by underclocking your graphic card at boot by adding this command to xprofile:

rovclock -c 90 -m 100

Dual Screen

If you want to use an external screen for a presentation or as an extended desktop, you can use xrandr. For an extended desktop, you should first add one line in your Template:Filename configuration file in the Template:Codeline area:


SubSection "Display"
 		Depth     24
 		Modes "1024x768" "800x600" "640x480"


SubSection "Display"
		Depth     24
		Modes "1024x768" "800x600" "640x480"
		Virtual 2304 1024

The numbers are the total rectangular resolution that you need to use. In this case, I'm using the internal 1024x768 screen and an external 1280x1024 screen on the right. The total resolution is 1024+1280=2304 pixels large and 1024>768=1024 pixels height.

Note that in 24 bits with this option, the performance is affected for 3D drawing, so you may need to comment it and use only one screen when you need the graphical power.

Then restart your X server. You can issue this command in a shell:

xrandr --output VGA-0 --right-of LVDS

To find the exact name of the monitors and the maximum resolution that you set up in the configuration file, you can type just Template:Codeline without arguments.



This will put your screen brightness to the minimum level when on battery and restore it to maximum when on ac power:

echo -e '#!/bin/bash\necho 0 > /sys/class/backlight/thinkpad_screen/brightness' > /etc/laptop-mode/batt-start/battscript
chmod 0755 /etc/laptop-mode/batt-start/battscript
echo -e '#!/bin/bash\necho 7 > /sys/class/backlight/thinkpad_screen/brightness' > /etc/laptop-mode/lm-ac-start/acscript
chmod 0755 /etc/laptop-mode/lm-ac-start/acscript
ln -s /etc/laptop-mode/lm-ac-start/acscript /etc/laptop-mode/onlm-ac-start/acscript

It will create scripts, executed by the laptop-mode daemon when switching the power source, that change the brightness of your screen using the thinkpad_acpi module.


The X31 CPUs can be undervolted, which means they will offer you the same performance, but with more battery life and a cooler laptop. From personal experience, my CPU temperature,during 100% activity, dropped by 15-20°C just by using this patch. This is extremely easy using the linux-phc patch, but only if you know the proper values to give the CPU. Informations on how to find them is available here or here. I know it can be hard to find your own values, so here is a table were you can indicate what are the good values for each of the X31 CPUs:

  • Pentium-m 1600MHz : 34 26 18 12 8 5
Warning: Your computer may freeze once a month because of those values. If you find more stable ones, please indicate them.

Once you have your values, just run:

# echo VALUES > /sys/devices/system/cpu/cpu0/cpufreq/phc_vids

For example:

# echo 34 26 18 12 8 5 > /sys/devices/system/cpu/cpu0/cpufreq/phc_vids

You can add this command to your Template:Filename to make the undervolting permanent.


Create the following file: Template:File

The three first lines put some of your devices in power-saving mode, respectively the USB ports, the wireless card and the sound card. Note that you need the last line in order to control your fan speed (see above).


To see additional sources of power drain, install powertop:

# pacman -S powertop

And run it while on battery power.

Hard drive dilemma

As set earlier, the hard drive is on a power-saving mode that can make it spin off and on often. It may reduce its lifetime. You can install the smartmontools package and issue this command:

# smartctl -A /dev/sda | grep Load_Cycle_Count

If the number is growing too fast, you might want to set off the powersaving mode by issuing:

# hdparm -B 254 /dev/sda

Put it in Template:Filename to modify it at boot time.



You can use a script from ThinkWiki to considerably lower your CPU temperature. Simply download it from here, rename it to Template:Filename, and run:

# chmod 0755 tp-fancontrol
# mv tp-fancontrol /usr/bin

To run the script at each boot, add this line to your Template:Filename:

tp-fancontrol -d

Also, I suggest changing the first maximum temperature threshold (the CPU one) to 55. Just edit Template:Filename, the file is self-explanatory.

Wireless and WPA

If you have the Cisco neta504 wifi card, it's a bit tricky to use the wpa encryption with it. Firstofall, remove and blacklist the airo and the airo_cs modules in your Template:Filename remove the module airo from the kernel

# rmmod airo
# rmmod airo_cs

then install ndiswrapper

# pacman -S ndiswrapper

download the neta504 driver for windows and unpack it (Be sure that you have unpacked the whole driver !) Then run :

# ndiswrapper -i /path/to/your/dir/netA504.inf

Save the ndiswrapper conf file :

# ndiswrapper -m
# ndiswrapper -ma
# ndiswrapper -mi

Now you can add to your kernel the module :

# modprobe ndiswrapper

and voilà ! I've tried this with wicd and it works flawlessly !

Audio keys

To enable the audio keys interfacing with ALSA, add:

event=ibm/hotkey HKEY 00000080 *
action=/etc/acpi/ %e

to Template:Filename, create the following file and make it executable: Template:File

You'll also need to add:

echo enable,0xffffffff >/proc/acpi/ibm/hotkey

to Template:Filename or somewhere similar for the events to be recognized.