Difference between revisions of "IBM ThinkPad X41"

From ArchWiki
Jump to: navigation, search
(Installation)
(Added the "Getting display keys to work" section)
(7 intermediate revisions by 5 users not shown)
Line 1: Line 1:
[[Category:IBM]]  
+
[[Category:IBM]]
 +
[[de:IBM X41t]]
 
The X41 and X41t (tablet) are both SATA-based machines that
 
The X41 and X41t (tablet) are both SATA-based machines that
 
include a SATA-PATA bridge allowing the use of PATA HDDs, see external links for
 
include a SATA-PATA bridge allowing the use of PATA HDDs, see external links for
Line 12: Line 13:
 
value.
 
value.
 
==Installation==
 
==Installation==
Grab the .iso file from [https://www.archlinux.org/download/ Arch Download], write this to a memory stick {{bc |<nowiki> sudo dd if=archlinux-201x.xx.xx-dual.iso of=/dev/sdX bs=4M</nowiki>}}Restart the computer and boot into it like any other Arch installation.
+
Grab the .iso file from [https://www.archlinux.org/download/ the download page], write this to a memory stick {{bc |<nowiki> sudo dd if=archlinux-201x.xx.xx-dual.iso of=/dev/sdX bs=4M</nowiki>}}Restart the computer and boot into it like any other Arch installation.
  
 
==Useful packages==  
 
==Useful packages==  
Line 61: Line 62:
 
utilisation of your HDD therefore saving a considerable amount of power. The
 
utilisation of your HDD therefore saving a considerable amount of power. The
 
effect with SSDs is less pronounced, but still saves some power.
 
effect with SSDs is less pronounced, but still saves some power.
{{bc|<nowiki>echo "vm.laptop_mode=5" | sudo tee /etc/sysctl.conf/laptop_mode.conf"</nowiki>}}
+
{{bc|<nowiki>echo "vm.laptop_mode=5" | sudo tee /etc/sysctl.d/laptop_mode.conf</nowiki>}}
  
 
===SATA-ALPM (pm-utils)===
 
===SATA-ALPM (pm-utils)===
Line 76: Line 77:
  
 
===i915 RC6 powersaving===
 
===i915 RC6 powersaving===
The i915 chipset supports a variety of powersaving features, checkout
+
See [[Intel_Graphics#Module-based_Powersaving_Options]].
{{ic|<nowiki>modinfo i915 \| grep -i power</nowiki>}} for all options. The
+
following are a good set to enable.
+
{{hc|/etc/modprobe.d/i915.conf|<nowiki>options i915 i915_enable_rc6=7 i915_enable_fbc=1 lvds_downclock=1</nowiki> }}
+
RC6 is a powersaving protocol, 7 enables RC6, deep RC6 and deepest RC6 (refer to
+
[[Power Management#Enable RC6 Power Save Options]] for more information).
+
{{ic|i915_enable_fbc&#61;1}} enables framebuffer compression reducing the time taken
+
to update the screen. {{ic|lvds_downclock&#61;1}} lowers the clockrate of the
+
screen.
+
  
 
===Disable NMI watchdog===
 
===Disable NMI watchdog===
Line 90: Line 83:
 
default. It is useless for normal operation and significantly increases the
 
default. It is useless for normal operation and significantly increases the
 
number of CPU wakeups/second.  
 
number of CPU wakeups/second.  
{{bc|<nowiki>echo "kernel.nmi_watchdog=0" | sudo tee /etc/sysctl.conf/nmi_watchdog.conf
+
{{bc|<nowiki>echo "kernel.nmi_watchdog=0" | sudo tee /etc/sysctl.d/nmi_watchdog.conf
 
</nowiki>}}
 
</nowiki>}}
  
Line 98: Line 91:
 
CPU. Undervolting reduces the voltage(V) the processor runs at, because P=IV this will reduce your power consumption, this has no effect on performance, any excess voltage will be dissipated as heat, your laptop will run cooler and the fan will activate less frequently.
 
CPU. Undervolting reduces the voltage(V) the processor runs at, because P=IV this will reduce your power consumption, this has no effect on performance, any excess voltage will be dissipated as heat, your laptop will run cooler and the fan will activate less frequently.
 
{{bc|
 
{{bc|
$ yaourt -S intel-phc
+
$ yaourt -S phc-intel
 
$ phc-intel setup # To install drivers
 
$ phc-intel setup # To install drivers
 
$ yaourt -S linux-phc-optimize
 
$ yaourt -S linux-phc-optimize
Line 105: Line 98:
  
 
Once you have established stable VIDs, adding them to system startup can be
 
Once you have established stable VIDs, adding them to system startup can be
accomplished modifying the intel-phc configuration file. If it doesn't exist,
+
accomplished modifying the phc-intel configuration file. If it doesn't exist,
 
create it
 
create it
 
{{hc|/etc/phc-intel.conf|
 
{{hc|/etc/phc-intel.conf|
 
<nowiki> VIDS="17 15 13 11 9 7 5 4 4" </nowiki> }}
 
<nowiki> VIDS="17 15 13 11 9 7 5 4 4" </nowiki> }}
  
You can check that this is enabled on your next reboot by {{ic|sudo intel-phc
+
You can check that this is enabled on your next reboot by {{ic|sudo phc-intel
 
status}}
 
status}}
  
Line 117: Line 110:
 
provides support for it. Once installed the driver should be activated following
 
provides support for it. Once installed the driver should be activated following
 
the next reboot.
 
the next reboot.
 +
===Getting display keys to work===
 +
If the display keys (Rotate, Escape, Enter, Prev, Next,...) on your X41 tablet aren't working, add {{ic|1=atkbd.softraw=0}} as a [[kernel parameter]] in your boot loader configuration. Once they're producing [[Extra Keyboard Keys|scancodes]], you can [[map scancodes to keycodes#Using setkeycodes|map them to keycodes]].
  
 
= External links =
 
= External links =

Revision as of 12:30, 27 December 2013

The X41 and X41t (tablet) are both SATA-based machines that include a SATA-PATA bridge allowing the use of PATA HDDs, see external links for modifications to use SATA HDDs and SSDs. The laptops utilise a Pentium M processor (either 1.5GHz or 1.6GHz), the Linux-ck packages contain optimised packages for this architecture.

This article contains some useful tweaks to make the most of your machine, the tweaks are mainly powersaving biased. With vanilla Arch, around 3 hours battery life was achieved, following powersaving tweaks a bit over than 5 hours was achieved, this was performed with screen brightness at the second highest value.

Installation

Grab the .iso file from the download page, write this to a memory stick
 sudo dd if=archlinux-201x.xx.xx-dual.iso of=/dev/sdX bs=4M
Restart the computer and boot into it like any other Arch installation.

Useful packages

Some useful packages for your IBM/Lenovo ThinkPad X41:

System Packages

  • acpi - provides /proc/acpi, interesting things like lid state, temperatures, volume, brightness etc.
  • xf86-input-wacom - Driver supporting Wacom tablet screen.
  • xf86-video-intel - Xorg driver for the Intel 915GM graphics chip.
  • tp_smapi - Adds support for SMAPI functions (battery discharge control, battery information, hdaps acceloremeter support).
  • thinkfinger - Driver for fingerprint reader.

The IBM X41 comes with a ipw2915 wireless Centrino (A, B and G) or ipw2200 wireless Centrino (B and G) module, the ipw2200 module provides support for these two devices. netctl has been tested and works flawlessly with the ipw2915.

Applications

Note: Thinkfan seems to fail due to thinkpad_acpi not having a fan_control function
  • thinkfanAUR - Control the utilisation of the fan.
  • gpm - Linux console mouse server.

General Tweaks

Scrolling with trackpoint

The following file can be added for trackpoint scrolling support in X.

/etc/X11/xorg.conf.d/10-trackpoint.conf

Section "InputClass"
        Identifier      "Trackpoint Wheel Emulation"
        MatchProduct    "TPPS/2 IBM TrackPoint|DualPoint Stick|Synaptics Inc. Composite TouchPad / TrackPoint|ThinkPad USB Keyboard with TrackPoint|USB Trackpoint pointing device"
        MatchDevicePath "/dev/input/event*"
        Option          "EmulateWheel"          "true"
        Option          "EmulateWheelButton"    "2"
        Option          "Emulate3Buttons"       "false"
        Option          "XAxisMapping"          "6 7"
        Option          "YAxisMapping"          "4 5"
EndSection

Taken from Xorg#Example: Wheel emulation (for a Trackpoint)

Powersaving tweaks

Initially without any powersaving tweaks, the X41 uses quite a lot of power (this can be monitored using powertop, it also provides suggestions for reducing power consumption). Here are some modifications that I found considerable improved the battery life of the X41t.

laptop-mode (kernel)

Laptop mode is included in the kernel, it buffers disk activities to reduce utilisation of your HDD therefore saving a considerable amount of power. The effect with SSDs is less pronounced, but still saves some power.

echo "vm.laptop_mode=5" | sudo tee /etc/sysctl.d/laptop_mode.conf

SATA-ALPM (pm-utils)

ALPM - Aggressive Link Power Management allows the SATA host bus adapter to enter a low power state when inactive therefore reducing power consumption.

echo "SATA_ALPM_ENABLE=true" | sudo tee /etc/pm/config.d/sata_alpm
sudo chmod +x /etc/pm/config.d/sata_alpm

Powersaving on PCI devices

Powersaving isn't automatically enabled on devices as sometimes it causes issues, this can save about 2W.

/etc/udev/rules.d/pci_powersaving.rules
ACTION=="add", SUBSYSTEM=="pci", ATTR{power/control}="auto"

i915 RC6 powersaving

See Intel_Graphics#Module-based_Powersaving_Options.

Disable NMI watchdog

The NMI watchdog is a debugging feature of the linux kernel that is enabled by default. It is useless for normal operation and significantly increases the number of CPU wakeups/second.

echo "kernel.nmi_watchdog=0" | sudo tee /etc/sysctl.d/nmi_watchdog.conf

PHC

PHC - Processor Hardware Control. intel-phcAUR supports the Mobile Centrino line of processors and hence the X41, this program allows you to undervolt your CPU. Undervolting reduces the voltage(V) the processor runs at, because P=IV this will reduce your power consumption, this has no effect on performance, any excess voltage will be dissipated as heat, your laptop will run cooler and the fan will activate less frequently.

$ yaourt -S phc-intel
$ phc-intel setup # To install drivers
$ yaourt -S linux-phc-optimize
$ sudo linux-phc-optimize # Repeat this each time the laptop crashes until you've got a full set of parameters, this is 9 times

Once you have established stable VIDs, adding them to system startup can be accomplished modifying the phc-intel configuration file. If it doesn't exist, create it

/etc/phc-intel.conf
 VIDS="17 15 13 11 9 7 5 4 4"  

You can check that this is enabled on your next reboot by sudo phc-intel status

Tablet support

The X41t utilises a Wacom digitiser for input, pacman -S xf86-input-wacom provides support for it. Once installed the driver should be activated following the next reboot.

Getting display keys to work

If the display keys (Rotate, Escape, Enter, Prev, Next,...) on your X41 tablet aren't working, add atkbd.softraw=0 as a kernel parameter in your boot loader configuration. Once they're producing scancodes, you can map them to keycodes.

External links