Difference between revisions of "IPod"

From ArchWiki
Jump to: navigation, search
(The iFuse Way)
(The iFuse Way - iPhone OS 3.x and 4.x)
Line 175: Line 175:
 
which will install everything you will need.
 
which will install everything you will need.
  
You will need to install libplist, libimobiledevice, libgpod-git (remove libgpod if previously installed!), usbmuxd and ifuse, so either go over to the AUR or:
+
You will need to install {{Package AUR|libplist}, {{Package AUR|libimobiledevice}, {{Package AUR|libgpod-git} (remove libgpod if previously installed), {{Package AUR|usbmuxd} and {{Package AUR|ifuse} from the AUR.
# yaourt -Rdn libgpod
+
# yaourt -S libplist libimobiledevice ifuse usbmuxd libgpod-git
+
(See [[Yaourt]] for information on setting up yaourt)
+
  
 
Now make sure that you have the fuse module loaded by doing <tt>modprobe fuse</tt>, assuming that you don't have it in /etc/rc.conf already.
 
Now make sure that you have the fuse module loaded by doing <tt>modprobe fuse</tt>, assuming that you don't have it in /etc/rc.conf already.

Revision as of 05:43, 3 January 2011

Introduction

In general, use of an iPod can be accomplished by simply mounting it somewhere and then pointing a libgpod-compatible program at that mountpoint. Amarok, Rhythmbox, and gtkpod are all capable of this.

Changing iPod Mountpoint

HAL will mount an attached iPod to /media/<iPod name>. If the volume label of your iPod is long, or contains a mixture of spaces, and/or lower-case and capital letters, it may present an inconvenience. You may easily change the volume label for more expedient access using mlabel from the mtools package:

  • Get and confirm the current volume label:
# mlabel -i /dev/sdxx -s ::
  • Set the new volume label (as iPod)
# mlabel -i /dev/sdxx -s ::iPod

Where /dev/sdxx is the current mountpoint of your iPod.

HAL will now automount iPod to /media/iPod.

Converting video for iPod

Gen 5/5.5

DVD to iPod

Get with: http://diveintomark.org/public/2007/06/podencoder.txt
Depends on: aur/gpac mplayer

Has detailed help, and is fairly self explanatory.

Mirrored at http://src.iphitus.org/scripts/podencoder.txt

An alternative is to use a method suggested at [DVD Ripping] then use one of the programs listed below to convert that to an iPod-friendly format.

Video File to iPod

Get with: http://src.iphitus.org/scripts/mp4ize.txt
Depends on: mplayer

I originally found this script here: http://thomer.com/howtos/ipod_video.html http://thomer.com/howtos/mp4ize It has been modified to properly handle filenames with unusual characters. Thanks to Thomer for the great script.

Handbrake

Handbrake is a nifty tool with presets for a variety of iPod versions. A CLI version is available from pacman by:

pacman -S handbrake

or a version with a GTK interface is available in the AUR. See Template:Package AUR The version within the package managers seem to be broken though (ie Handbrake version 0.9.3

visit here http://forum.handbrake.fr/viewtopic.php?f=6&t=12464#p61835
or here http://aur.archlinux.org/packages.php?ID=29320

If you do decide to take the CLI way, a good guide is available at http://trac.handbrake.fr/wiki/CLIGuide,

More Advanced/Configurable Methods

Avidemux

Get with: pacman -S avidemux

This can convert to mp4 files. If you enforce a hard max of bitrate @ 700ish and keep the video size to 720x480 or 320x240 than it works fine for video file exporting.

Mencoder

Get with: pacman -S mplayer

Has extremely comprehensive configuration support, which will be able to spit out iPod-compatible video files. Check out man mencoder; a lot of mplayer opts will also affect encoding.

A basic guide is also available at Mencoder.

An example command to encode iPhone/iPod Touch-compatible video:

mencoder INPUT -o output.mp4 \
-vf scale=480:-10,harddup \
-oac faac -faacopts mpeg=4:object=2:raw:br=128 \
-of lavf -lavfopts format=mp4 \
-ovc x264 -x264encopts nocabac:level_idc=30:bframes=0

FFMpeg

Get with: pacman -S ffmpeg

Another encoder with comprehensive configuration support. Example command to encode for 5G iPod:

ffmpeg -vcodec xvid -b 300 -qmin 3 -qmax 5 -bufsize 4096 \
-g 300 -acodec aac -ab 96 -i INPUT -s 320x240 \
-aspect 4:3 output.mp4

or iPod Touch/iPhone compatible video output:

ffmpeg -f mp4 -vcodec mpeg4 -maxrate 1000 -b 700 -qmin 3 -qmax 5\
-bufsize 4096 -g 300 -acodec aac -ab 192 -s 480×320 -aspect 4:3 -i INPUT output.mp4

iPhone/iPod Touch

Introduction

By default, neither the iPhone nor the iPod Touch present mass storage capability over USB, though there exist two solutions for accessing your files.

The first is to mount your device through the FUSE filesystem SSHFS. This requires jailbreaking, which at the moment requires access to a computer running Mac OS or a recent version of Windows, and QuickPwn. After jailbreaking, an SSH server will also need to be installed on the device, which can be done through the Cydia program, installed on the device during the jailbreak process.

The second is to use a different FUSE filesystem called iFuse, which allows you to mount your device through USB, as you normally would. This method requires no hacking and is in general the better solution, though be aware that the software is still under heavy development. As of late, however, it has proven to be rather reliable and stable.

Note: The current development releases of libgpod and gtkpod (libgpod-git & gtkpod-git) support the iPod Touch and the Iphone OS 3.1.x. It's possible to transfer pictures and music without limitations

Refer to this page:[1]

Making Friends with the Device

The SSHFS Way

After this the easiest way to properly initialise a few things on the device's side is with the iPod convenience script. This is available in the AUR as Template:Package AUR

Next do modprobe fuse to actually load the fuse module. You may also want to add it to your MODULES array in /etc/rc.conf to have it loaded on boot.

A few things may need changing in the script, depending on your setup. If you don't use sudo, replace:

sudo lsusb -v -d 05ac: | grep iSerial | awk '{print $3}' | cut -b1-16 | xargs printf "FirewireGuid: 0x%s" >> $MOUNTPOINT/iTunes_Control/Device/SysInfo

with:

su -c "lsusb -v -d 05ac: | grep iSerial | awk '{print $3}' | cut -b1-16 | xargs printf \"FirewireGuid: 0x%s\" >> $MOUNTPOINT/iTunes_Control/Device/SysInfo"

in the file /usr/share/ipod-convenience/mount-umount. You may also need to replace:

PROCESS=`ssh root@$IPADDRESS ps x | grep MobileMusicPlayer | grep -v grep | awk '{print $1}'`

with:

PROCESS=`ssh root@$IPADDRESS ps ax | grep MobileMusicPlayer | grep -v grep | awk '{print $1}'`

(I'm not sure under what circumstances this is necessary; it was on my iPod Touch running 2.2.1, and it won't have any adverse affect under other firmware version)

After that, edit the /etc/default/ipod-convenience file with details of your device's IP address, and create the mount pount, which is /media/ipod by default (make sure to set the permissions correctly if you want it accessible by a regular user)

To actually mount the device, run ipod-touch-mount or iphone-mount (they both do exactly the same thing so it doesn't matter which). This should prompt for the root password of the device twice, which is 'alpine' by default in firmware versions 1.1 and up. This will need to be done every time you want to sync. (This can be done without having to type the password each time by using SSH keys - see Using SSH Keys for more information)

The iFuse Way

You will need to install Template:Package AUR, Template:Package AUR, Template:Package AUR, and Template:Package AUR from the AUR.

Now make sure that you have the fuse module loaded by doing modprobe fuse, assuming that you don't have it in /etc/rc.conf already.

You can now mount your device:

# ifuse <mountpoint>

The mountpoint field is where you want to have it mounted.

And you're done! You should be able to point your syncing software of choice to the mountpoint and be able to transfer files.

You can also try adding this to your udev rules for automounting: Template:File

Unobfuscating the Database

Since firmware version 2.0, Apple has obfuscated the music database. If you are using recent firmware, the file /System/Library/Lockdown/Checkpoint.xml can be modified to enable use of the older, non-obfuscated database. Replace:

<key>DBVersion</key>
<integer>4</integer>

with:

<key>DBVersion</key>
<integer>2</integer>

Then reboot your device.

Syncing

Use your favourite iPod-compatible program. Individual configuration will vary, but in general, pointing your program to your specified mount point should yield good results.

After you've synced, run ipod-touch-umount (or iphone-umount, depending on your taste) to unmount the SSHFS file system and restart the MobileMusicPlayer process on the device, so that the new music database is read.

If you used iFuse, simply type:

# umount <mountpoint>

You will still need to reload the MobileMusicPlayer process. If your device is not jailbroken, then you are stuck restarting it.

The iFuse Way - iPhone OS 3.x and 4.x

Warning: this software is considered unstable and should probably not be used in a productive environment

Make sure you already installed base-devel, which contains several programs needed to compile your new components. If you did not, just run:

# pacman -S base-devel

which will install everything you will need.

You will need to install {{Package AUR|libplist}, {{Package AUR|libimobiledevice}, {{Package AUR|libgpod-git} (remove libgpod if previously installed), {{Package AUR|usbmuxd} and {{Package AUR|ifuse} from the AUR.

Now make sure that you have the fuse module loaded by doing modprobe fuse, assuming that you don't have it in /etc/rc.conf already. Check if the group "usbmux" has been created and add your user using

# gpasswd -a <user> usbmux

To make sure the new rules apply, execute

$ udevadm control --reload-rules

and plug in your iPod/iPhone.

Run as ROOT:

# usbmuxd

Now you should the be able to mount your device by running

$ ifuse ~/ipod

or similar. Make sure the directory used exists and is accessible to your user.

Mount the device and create the iTunes_Control/Device directory. Then, get your UUID. It should be in the syslog from usbmuxd, or you can find it by running

$ lsusb -v | egrep "iSerial.*[a-f0-9]{40}"

It should be 40 characters long. Then, run

$ ipod-read-sysinfo-extended <uuid> <mountpoint>. 

This should generate a file named iTunes_Control/Device/SysInfoExtended.

Now, start up your favourite app, it should detect the device via libgpod. I recommend using gtkpod-git for the time being, as that's what the libgpod devs seem to be using for debugging purposes.

Rhythmbox

Rhythmbox uses the Gnome Virtual File System to detect mobile devices. If using the iFuse way, gvfs-afc needs to be installed:

# pacman -S gvfs-afc

iPod Classic/Nano3g

You need to set up the iPod to make libgpod able to find its firewire id. For this, you will need to get your firewire id manually

1) Mount the iPod as a rw mountpoint. In the following example, I will use /mnt/ipod.

2 ) Find the serial number by typing

  sudo lsusb -v | grep -i Serial 

this should print a 16 character long string like 00A1234567891231 (it will have no colons or hyphens)

3) Once you have that number, create or edit /mnt/ipod/iPod_Control/Device/SysInfo. Add to that file the line below:

  FirewireGuid: 0xffffffffffffffff

(replace ffffffffffffffff with the 16 digit string you obtained at the previous step and don't forget the trailing 0x before the string)

Your iPod can now be managed with amarok or gtkpod.

iPod management apps

  • Rhythmbox
    • GTK interface (Gnome)
    • Is part of the official Gnome projects.
    • Fast, light interface.
    • Manage music on your computer and iPod
    • Download or stream podcasts and video podcasts
    • Queue up songs and podcasts
    • last.fm integration
    • Live radio stations
    • Jamendo and Magnatune support
    • Audio CD burning
    • Album cover display
    • Song lyrics display
    • DAAP sharing
  • Banshee
    • GTK interface (Gnome)
    • Uses Mono so it is slower and more resource hogging than rhythmbox
    • Device Sync: Sync your music and videos to your Android, iPod, or other device - or import its media
    • Podcasts: Download or stream podcasts and video podcasts
    • Play Queue: Queue up songs, videos, and podcasts, or let the Auto DJ take over
    • Shuffle Modes: Shuffle (or Auto DJ) by artist, album, rating, or even songs' acoustic similarity
    • Album Art: Artwork is automatically fetched as you listen
    • Powerful Search, Smart Playlists: Find exactly what you want, fast
    • Video Support: All the power of Banshee, now for your videos
  • Yamipod
    • GTK interface (Gnome)
    • super lightweight app for managing ONLY music on your iPod (not on your computer)
    • easy ratings edit
    • PC to iPod synchronization
    • News RSS and podcasts to iPod upload
    • Last.fm support
    • playlist support
  • gtkpod
    • GTK interface (Gnome)
    • Read your existing iTunesDB (i.e. import the existing contents of your iPod including playcounts, ratings and on-the-go playlists).
    • Add MP3, WAV, M4A (non-protected AAC), M4B (audio book), podcasts, and various video files (single files, directories or existing playlists) to the **iPod. You need a third party product to download podcasts, like 'bashpodder' or 'gpodder'
    • View, add and modify Cover Art
    • Browse the contents of your local harddisk by album/artist/genre by adding all your songs to the 'local' database. From there the tracks can be **dragged over to the iPod/Shuffle easily.
    • Create and modify playlists, including smart playlists.
    • You can choose the charset the ID3 tags are encoded in from within gtkpod. The default is the charset currently used by your locale setting.
    • Extract tag information (artist, album, title...) from the filename if you supply a template.
    • Detect duplicates when adding songs (optional).
    • Remove and export tracks from your iPod.
    • Modify ID3 tags -- changes are also updated in the original file (optional).
    • Refresh ID3 tags from file (if you have changed the tags in the original file).
    • Sync directories.
    • Normalize the volume of your tracks (uses mp3gain or the replay-gain tag)
    • Write the updated iTunesDB and added songs to your iPod.
    • Work offline and synchronize your new playlists / songs with the iPod at a later time.
    • Export your korganizer/kaddressbook/thunderbird/evocalendar/evolution/webcalendar... data to the iPod (scripts for other programs can be added).
  • qPod
    • KDE/qt interface
    • frontend for GNUpod

See also

http://help.ubuntu.com/community/PortableDevices/iPhone for more information about iPhone/iPod Touch support