Intel GMA 3600
zh-CN:Intel_GMA3600 Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary end The Intel GMA 3600 series is a family of integrated video adapters based on the PowerVR SGX 545 graphics core. It is used in the Atom N2600 and Atom N2800.
Intel release a graphics driver for PowerVR: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21938
Be aware: The current version 1.03 (10/01/2012) has the following dependencies:
* Kernel: 3.0.0 * Mesa GL: 7.9 * Xorg: 1.9
* Kernel: 3.1.0 * Mesa GL: 7.11 * Xorg: 1.11
This means, unleass you run a really outdated system this driver is useless for Arch-Linux.
Kernel module driver
Kernel has an experimental support for this adapter since v3.3. Since Kernel v3.5 the GMA3600 power features are supported. Now suspend/resume should properly work.
If after resume you got a blank screen try the following
sudo touch /etc/pm/sleep.d/99video
At the moment there is no accelerated driver for Xorg Server, but some support is available using the Xorg modesetting driver:
pacman -S xf86-video-modesetting
Section "Device" Identifier "Intel GMA3600" Driver "modesetting" EndSection
The modesetting driver allows disabling/enabling LVDS, VGA, etc. ports and changing resolution using xrandr.
The following can be used to disable LVDS and force enable VGA if needed.
Section "Device" Identifier "Intel GMA3600" Driver "modesetting" Option "Monitor-LVDS-0" "Ignore" Option "Monitor-VGA-0" "Monitor" EndSection Section "Monitor" Identifier "Ignore" Option "Ignore" EndSection Section "Monitor" Identifier "Monitor" Option "Enable" EndSection
It is unable to utilize whole chip power and play fullHD movies using graphics acceleration. As workaround you could utilize the maximum power of your Atom CPU to decode video:
mplayer -lavdopts threads=4 -fs myvideo.avi
Cedarview-drm module port
git clone https://github.com/thomas001/cedarview-drm.git cedarview-drm-master (Intended for Linux Kernel releases 3.7 to 3.9)
git clone -b linux-3.5 https://github.com/thomas001/cedarview-drm.git (Intended for Linux Kernel releases 3.4 and 3.5)
Currently the following kernel versions are tested:
* vanilla 3.7.8 * vanilla 3.4.32 --- use linux-3.5 branch
You can either compile the module directly using a command like:
make -C /lib/modules/`uname -r`/build M=`pwd` KMYDIR=`pwd`
or you employ DKMS:
cp -r /path/too/cedarview-drm /usr/src/cedarview-drm-1.0.3 dkms add cedarview-drm/1.0.3
Afterwards you have to build the module and maybe regenerate your initramfs, as follows:
mkinitcpio -p linux