Difference between revisions of "KVM"
|Line 1:||Line 1:|
Revision as of 13:55, 20 September 2011
KVM, Kernel-based Virtual Machine, is a hypervisor built right into the 2.6 (and 3.X) Linux kernel for kernels newer than 2.6.20. It is similar to Xen in purpose but much simpler to get running. To start using the hypervisor, just load the appropriate Template:Codeline kernel modules and the hypervisor is up. As with Xen's full virtualization, in order for KVM to work, you must have a processor that supports Intel's VT-x extensions or AMD's AMD-V extensions.
Using KVM, one can run multiple virtual machines running unmodified GNU/Linux, Windows, or any other operating system. (See Guest Support Status). Each virtual machine has private virtualized hardware: a network card, disk, graphics adapter, etc. See KVM Howto
Differences among KVM, Xen, VMware, and QEMU can be found at the KVM FAQ.
- 1 Get the packages
- 2 Setup kernel modules
- 3 How to use KVM
- 4 Paravirtualized guests (virtio)
- 5 Resizing the image
- 6 Enabling KSM
- 7 Easy to Use for New User
- 8 Bridged Networking
- 9 Mouse integration
- 10 Mounting the QEMU image
- 11 Starting KVM virtual machines on boot up
Get the packages
Arch Linux kernel 2.6.22 and newer now provide the appropriate Template:Codeline modules. You could check if your kernel supports KVM with the following command:
modprobe -l 'kvm*'
KVM also requires a modified QEMU to launch and manage virtual machines. You can choose one of the following according to your needs:
1. The Template:Codeline package in the [extra] repository (recommended)
pacman -S qemu-kvm
2. If you also need to use QEMU, you can choose to install Template:Codeline >= 0.9.0 instead, which conflicts with the Template:Codeline package. However, Template:Codeline now provides a Template:Codeline executable (Template:Codeline) that takes advantage of this technology.
pacman -S qemu
Setup kernel modules
You should check if your computer supports KVM hardware acceleration with the following command. It must return something.
egrep '^flags.*(vmx|svm)' /proc/cpuinfo
gpasswd -a <Your_Login_Name> kvm
Secondly, you have to choose one of the following depending on the manufacturer of your CPU.
modprobe kvm modprobe kvm-intel
modprobe kvm modprobe kvm-amd
If modprobing Template:Codeline succeeds, but modprobing Template:Codeline or Template:Codeline fails (but Template:Filename claims that hardware acceleration is supported), check your BIOS settings. Some vendors (especially laptop vendors) disable these processor extensions by default.
How to use KVM
- Create a guest OS image
$ qemu-img create -f qcow2 <Image_Name> <size>
- Install the guest OS
A CD/DVD image (ISO file) can be used for the installation.
$ qemu-kvm -hda <Image_Name> -m 512 -cdrom /path/to/the/ISO/image -boot d -vga std
- Running the system
$ qemu-kvm -hda <Image_Name> -m 512 -vga std
See QEMU for more information, and the Using the Kernel-based Virtual Machine section.
Paravirtualized guests (virtio)
KVM offers guests the ability to use paravirtualized block and network devices, which leads to better performance and lower overhead. Linux has had this ability with its virtio-modules since kernel 2.6.25. For Windows, a paravirtualized network driver can be obtained here: 
$ qemu-kvm -drive file=drive.img,if=virtio,boot=on
Almost the same goes for the network:
$ qemu-kvm -net nic,model=virtio
Preparing an (Arch) Linux guest
To use virtio devices after an Arch Linux guest has been installed, the following modules can be loaded in the guest: Template:Codeline, Template:Codeline, Template:Codeline, Template:Codeline, and Template:Codeline (for 32-bit guests, the specific "virtio" module is not necessary).
MODULES="virtio_blk virtio_pci virtio_net"
and rebuild the initial ramdisk:
# mkinitcpio -p linux
Virtio disks are recognized with the prefix v (e.g. vda, vdb, etc.); therefore, changes must be made in at least Template:Filename and Template:Filename (when booting from a virtio disk). When using grub-pc which references disks by UUID's, nothing has to be done.
Edit or create Template:Filename:
To enable virtio at Arch Linux installation time, manual GRUB installation is required (current arch-release-media 2010.05) Though AIF correctly detects the virtio disks and sets up the right prefixes, the Template:Filename file must be created before configuring the bootloader.
So when installing Arch Linux you can install GRUB by switching to another virtual terminal (Ctrl+Alt+F2) and running the following commands.
# grub > device (hd0) /dev/vda > root (hd0,0) > setup (hd0) > quit
Once you have installed GRUB, switch back to the main terminal with Ctrl+Alt+F1.
Preparing a Windows guest
Preparing a Windows guest for running with a virtio disk driver is a bit tricky.
In your KVM host (running Arch Linux), download the virtio disk driver from the Fedora repository.
Now you need to create a new disk image, which fill force Windows to search for the driver. To do it, stop the virtual machine if its running and issue the following command:
qemu-img create -f qcow2 fake.img 1G
Run the original Windows guest (still in the IDE mode). Add the fake disk and a CD-ROM with the driver.
qemu-kvm -drive file=windows.img,if=ide,boot=on -m 512 -drive file=fake.img,if=virtio -cdrom virtio-win-0.1-mm34.iso
Windows will detect the fake disk and try to find a driver for it. If it fails, go to Device Manager, locate the SCSI drive with an exclamation mark icon (should be open), click "Update driver" and browse for the proper directory on the virtual CD-ROM.
When the installation is successful, you can turn off the virtual machine and launch it again, now with the Template:Codeline driver.
qemu-kvm -drive file=windows.img,if=virtio,boot=on -m 512
Resizing the image
It is possible to increase the size of a qcow2 image later, at least with ext3. Convert it to a raw image, expand its size with dd, convert it back to qcow2, replace the partition with a larger one, do a Template:Codeline and resize the filesystem.
$ qemu-img convert -O raw image.qcow2 image.img $ dd if=/dev/zero of=image.img bs=1G count=0 seek=[NUMBER_OF_GB] $ qemu-img convert -O qcow2 -o cluster_size=64K image.img imageplus.qcow2 $ qemu-kvm -hda imageplus.qcow2 -m 512 -cdrom </Path/to/the/ISO/Image> -boot d -vga std $ fdisk /dev/sda [delete the partition, create new one occupying whole disk] $ e2fsck -f /dev/sda1 $ resize2fs /dev/sda1
Kernel Samepage Merging (KSM) is a feature of the Linux kernel introduced in the 2.6.32 kernel. KSM allows for an application to register with the kernel to have its pages merged with other processes that also register to have their pages merged. For KVM, the KSM mechanism allows for guest virtual machines to share pages with each other. In an environment where many of the guest operating systems are similar, this can result in significant memory savings.
To enable KSM, first ensure that you have a version of Template:Codeline installed which is at least 0.12.
# pacman -Qi qemu-kvm | grep Version Version : 0.12.1.2-1
Also ensure that your kernel is at least version 2.6.32.
# uname -r 3.0-ARCH
# echo 1 > /sys/kernel/mm/ksm/run
The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/: pages_shared - how many shared unswappable kernel pages KSM is using pages_sharing - how many more sites are sharing them i.e. how much saved pages_unshared - how many pages unique but repeatedly checked for merging pages_volatile - how many pages changing too fast to be placed in a tree full_scans - how many times all mergeable areas have been scanned A high ratio of pages_sharing to pages_shared indicates good sharing, but a high ratio of pages_unshared to pages_sharing indicates wasted effort. pages_volatile embraces several different kinds of activity, but a high proportion there would also indicate poor use of madvise MADV_MERGEABLE.
An easy way to see how well KSM is performing is to simply print the contents of all the files in that directory.
# for ii in /sys/kernel/mm/ksm/* ; do echo -n "$ii: " ; cat $ii ; done /sys/kernel/mm/ksm/full_scans: 151 /sys/kernel/mm/ksm/max_kernel_pages: 246793 /sys/kernel/mm/ksm/pages_shared: 92112 /sys/kernel/mm/ksm/pages_sharing: 131355 /sys/kernel/mm/ksm/pages_to_scan: 100 /sys/kernel/mm/ksm/pages_unshared: 123942 /sys/kernel/mm/ksm/pages_volatile: 1182 /sys/kernel/mm/ksm/run: 1 /sys/kernel/mm/ksm/sleep_millisecs: 20
Easy to Use for New User
You need to change Template:Codeline in the configure item "QEMU start command" to Template:Codeline or leave the "QEMU start command" as Template:Codeline and append Template:Codeline to the additional start options. With newer versions of Template:Codeline it might not be necessary to append Template:Codeline as the Template:Codeline executable will detect that KVM is running and start in the corresponding mode.
If you start your VM with a GUI tool and installation is very slow, you should check for proper KVM support, as QEMU may be falling back to pure software emulation.
pacman -S bridge-utils
Save this script in Template:Filename
#!/bin/sh echo "Executing /etc/qemu-ifup" echo "Bringing up $1 for bridged mode..." sudo /sbin/ifconfig $1 0.0.0.0 promisc up echo "Adding $1 to br0..." sudo /usr/sbin/brctl addif br0 $1 sleep 2
chmod 755 the script
chmod 755 /etc/qemu-ifup
Then use this script to start KVM. Adjust the Template:Codeline line to suit your requirements.
#!/bin/sh ARGS="-hda win2k.img -boot c -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=/etc/qemu-ifup -m 256 -localtime" echo "Starting QEMU with..." echo $ARGS echo "...." exec qemu $ARGS
Now the VM should get an IP address from your DHCP server and you can access it using that IP address from your LAN.
If you are using Template:Codeline, it is recommended for performance and security reasons to disable the firewall on the bridge:
# cat >> /etc/sysctl.conf <<EOF net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 EOF # sysctl -p /etc/sysctl.conf
Alternatively, you can configure Template:Codeline to allow all traffic to be forwarded across the bridge by adding a rule like this:
-I FORWARD -m physdev --physdev-is-bridged -j ACCEPT
To prevent the mouse from being grabbed when clicking on the guest operating system's windows, add the option Template:Codeline. This means QEMU is able to report the mouse position without having to grab the mouse. This also overrides PS/2 mouse emulation when activated.
$ qemu-kvm -hda <Image_Name> -m 512 -vga std -usbdevice tablet
Mounting the QEMU image
modprobe nbd max_part=63 qemu-nbd -c /dev/nbd0 [image.img] mount /dev/nbd0p1 [/mnt/qemu]