KVM, Kernel-based Virtual Machine, is a hypervisor built right into the Linux kernel. It is similar to Xen in purpose but much simpler to get running. To start using the hypervisor, just load the appropriate
kvm kernel modules and the hypervisor is up. As with Xen's full virtualization, in order for KVM to work, you must have a processor that supports Intel's VT-x extensions or AMD's AMD-V extensions.
Using KVM, one can run multiple virtual machines running unmodified GNU/Linux, Windows, or any other operating system. (See Guest Support Status). Each virtual machine has private virtualized hardware: a network card, disk, graphics adapter, etc. See KVM Howto.
- 1 Get the packages
- 2 Setup kernel modules
- 3 How to use KVM
- 4 Paravirtualized guests (virtio)
- 5 Resizing the image
- 6 Enabling KSM
- 7 Enable HugePages
- 8 Bridged Networking
- 9 Mouse integration
- 10 Mounting the QEMU image
- 11 Starting KVM virtual machines on boot up
- 12 Tips and tricks
Get the packages
Arch Linux kernels provide the appropriate kernel modules to support KVM.
You can check if your kernel supports KVM with the following command (assuming your kernel is built with
$ zgrep KVM /proc/config.gz
KVM requires that the virtual machine host's processor has virtualization support (named VT-x for Intel processors and AMD-V for AMD processors). You can check whether your processor supports hardware virtualization with the following command:
You processor supports virtualization only if there is a line telling you so.
You can also run:
$ grep -E "(vmx|svm)" --color=always /proc/cpuinfo
If nothing is displayed after running that command, then your processor does not support hardware virtualization, and you will not be able to use QEMU-KVM.
KVM also requires a modified QEMU to launch and manage virtual machines. You can choose one of the following according to your needs:
- The official repositories (recommended, "it still provides the best performance and certain additional features for using KVM with QEMU on x86" according to http://wiki.qemu.org/KVM). package is available in the
- If you also need to use QEMU, you can choose to install
qemu -enable-kvmtakes advantage of this technology. instead, which conflicts with the package. However,
Setup kernel modules
First, you need to add your user account into the
kvm group to use the
# gpasswd -a <Your_Login_Name> kvm
Secondly, you have to choose one of the following depending on the manufacturer of your CPU.
- If you have Intel's VT-x extensions, modprobe the
# modprobe kvm_intel
- If you have AMD's AMD-V (code name "Pacifica") extensions, modprobe the
# modprobe kvm_amd
kvm_amd fails but modprobing
kvm succeeds, (and
lscpu claims that hardware acceleration is supported), check your BIOS settings. Some vendors (especially laptop vendors) disable these processor extensions by default. To determine whether there's no hardware support or there is but the extensions are disabled in BIOS, the output from
dmesg after having failed to modprobe will tell.
If you want these modules to persist, add them to
How to use KVM
Create a guest OS image
$ qemu-img create -f qcow2 <Image_Name> <size>
Install the guest OS
A CD/DVD image (ISO file) can be used for the installation.
$ qemu-kvm -hda <Image_Name> -m 512 -cdrom /path/to/the/ISO/image -boot d -vga std
Running the system
$ qemu-kvm -hda <Image_Name> -m 512 -vga std
Xis the number of CPUs). The maximum number of assigned CPUs for one guest is 16.
-margument and the desired amount of main memory specified in megabytes (e.g.
-m 1024). Also note that recent Windows operating systems (tested with Windows Vista and Windows 7) require the
qcow2disk image format. Other disk image formats may give a 0x80070057 error during the installation.
If thepackage has been installed, you can use a GUI tool, such as for simple use or for particle control, to manage your virtual machine.
You need to change
qemu in the configure item "QEMU start command" to
qemu-kvm or leave the "QEMU start command" as
qemu and append
-enable-kvm to the additional start options. With newer versions of , it might not be necessary to append
-enable-kvm as the
qemu executable will detect that KVM is running and start in the correct mode.
If you start your VM with a GUI tool and installation is very slow, you should check for proper KVM support, as QEMU may be falling back to pure software emulation.
Paravirtualized guests (virtio)
KVM offers guests the ability to use paravirtualized block and network devices, which leads to better performance and lower overhead.
For Windows, a paravirtualized network driver can be obtained here.
FreeBSD has the ability to use virtio drivers since 10.0 (unreleased). A backport of the drivers are available in the port
emulators/virtio-kmod for FreeBSD 8.3 and 9.0.
A virtio block device requires the option
-drive instead of the simple
$ qemu-kvm -boot order=c -drive file=drive.img,if=virtio
-boot order=c is absolutely required when you want to boot from it. There is no auto-detection as with
Almost the same goes for the network:
$ qemu-kvm -net nic,model=virtio
Preparing an (Arch) Linux guest
To use virtio devices after an Arch Linux guest has been installed, the following modules can be loaded in the guest:
virtio_ring (for 32-bit guests, the specific "virtio" module is not necessary).
If you want to boot from a virtio disk, the initial ramdisk must be rebuilt. Add the appropriate modules in
/etc/mkinitcpio.conf like this:
MODULES="virtio_blk virtio_pci virtio_net"
and rebuild the initial ramdisk:
# mkinitcpio -p linux
Virtio disks are recognized with the prefix v (e.g. vda, vdb, etc.); therefore, changes must be made in at least
/boot/grub/menu.lst when booting from a virtio disk. When using grub-pc which references disks by UUID's, nothing has to be done.
Edit or create
To enable virtio at Arch Linux installation time, manual GRUB installation is required (for arch-release-media 2010.05).
Though AIF correctly detects the virtio disks and sets up the right prefixes, the
/boot/grub/device.map file must be created before configuring the bootloader.
So when installing Arch Linux, you can install GRUB by switching to another virtual terminal (Template:Keypress) and running the following commands.
# grub > device (hd0) /dev/vda > root (hd0,0) > setup (hd0) > quit
Once you have installed GRUB, switch back to the main terminal with Template:Keypress.
Further information on paravirtualization with KVM can be found here.
Preparing a Windows guest
Preparing a Windows guest for running with a virtio disk driver is a bit tricky.
In your KVM host (running Arch Linux), download the virtio disk driver from the Fedora repository.
Now you need to create a new disk image, which fill force Windows to search for the driver. To do it, stop the virtual machine if its running and issue the following command:
$ qemu-img create -f qcow2 fake.img 1G
Run the original Windows guest (still in the IDE mode). Add the fake disk and a CD-ROM with the driver.
$ qemu-kvm -drive file=windows.img,if=ide,boot=on -m 512 -drive file=fake.img,if=virtio -cdrom virtio-win-0.1-15.iso -vga std
If you have problems booting windows.img ISO image, or the virtio cd drivers not being detected, use this command.
$ qemu-kvm -drive file=fake.img,if=virtio -m 512 -boot d -drive file=windows.img,media=cdrom -drive file=virtio-win-0.1-15.iso,media=cdrom
Windows will detect the fake disk and try to find a driver for it. If it fails, go to Device Manager, locate the SCSI drive with an exclamation mark icon (should be open), click "Update driver" and browse for the proper directory on the virtual CD-ROM.
When the installation is successful, you can turn off the virtual machine and launch it again, now with the
$ qemu-kvm -drive file=windows.img,if=virtio,boot=on -m 512 -vga std
Preparing a FreeBSD guest
emulators/virtio-kmod port if you are using FreeBSD 8.3 or later up until 10.0-CURRENT where they are included into the kernel. After installation, add the following to your
virtio_loader="YES" virtio_pci_load="YES" virtio_blk_load="YES" if_vtnet_load="YES" virtio_balloon_load="YES"
Then modify your
/etc/fstab by doing the following:
sed -i/etc/fstab.bak "s/ad/vtbd/g" /etc/fstab
And verify that
/etc/fstab is consistent. If anything goes wrong, just boot into a rescue CD and copy
/etc/fstab.bak back to
Resizing the image
Since version 0.13.0 of
qemu-img executable, the
resize option. By this switch it is possible to resize a qcow2 image directly, with no need to pass through raw conversion. For example, this command will increase my_image.qcow2 image space by 10 Gigabytes
qemu-img resize my_image.qcow2 +10G
It is possible to increase the size of a qcow2 image later, at least with ext3. Convert it to a raw image, expand its size with dd, convert it back to qcow2, replace the partition with a larger one, do a
fsck and resize the filesystem.
$ qemu-img convert -O raw image.qcow2 image.img $ dd if=/dev/zero of=image.img bs=1G count=0 seek=[NUMBER_OF_GB] $ qemu-img convert -O qcow2 -o cluster_size=64K image.img imageplus.qcow2 $ qemu-kvm -hda imageplus.qcow2 -m 512 -cdrom </Path/to/the/ISO/Image> -boot d -vga std # fdisk /dev/sda [delete the partition, create new one occupying whole disk] # e2fsck -f /dev/sda1 # resize2fs /dev/sda1
Kernel Samepage Merging (KSM) is a feature of the Linux kernel introduced in the 2.6.32 kernel. KSM allows for an application to register with the kernel to have its pages merged with other processes that also register to have their pages merged. For KVM, the KSM mechanism allows for guest virtual machines to share pages with each other. In an environment where many of the guest operating systems are similar, this can result in significant memory savings.
There should be a
/sys/kernel/mm/ksm/ directory containing several files. You can turn KSM on or off by echoing a
0 (respectively) to
# echo 1 > /sys/kernel/mm/ksm/run
Or set it up by creating the file
w /sys/kernel/mm/ksm/run - - - - 1
If KSM is running, and there are pages to be merged (i.e. more than one similar VM is running), then
/sys/kernel/mm/ksm/pages_shared should be non-zero. From the kernel documentation in
The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/: pages_shared - how many shared unswappable kernel pages KSM is using pages_sharing - how many more sites are sharing them i.e. how much saved pages_unshared - how many pages unique but repeatedly checked for merging pages_volatile - how many pages changing too fast to be placed in a tree full_scans - how many times all mergeable areas have been scanned A high ratio of pages_sharing to pages_shared indicates good sharing, but a high ratio of pages_unshared to pages_sharing indicates wasted effort. pages_volatile embraces several different kinds of activity, but a high proportion there would also indicate poor use of madvise MADV_MERGEABLE.
An easy way to see how well KSM is performing is to simply print the contents of all the files in that directory.
# grep . /sys/kernel/mm/ksm/*
/sys/kernel/mm/ksm/full_scans:151 /sys/kernel/mm/ksm/max_kernel_pages:246793 /sys/kernel/mm/ksm/pages_shared:92112 /sys/kernel/mm/ksm/pages_sharing:131355 /sys/kernel/mm/ksm/pages_to_scan:100 /sys/kernel/mm/ksm/pages_unshared:123942 /sys/kernel/mm/ksm/pages_volatile:1182 /sys/kernel/mm/ksm/run:1 /sys/kernel/mm/ksm/sleep_millisecs:20
You may also want to enable hugepages to improve the preformance of your virtual machine.
With an up to date Arch Linux and a running KVM you probably already have everything you need. Check if you have the directory
/dev/hugepages. If not create it.
Now we need the right permissions to use this directory. Check if the group
kvm exist and if you are member of this group. This should be the case if you already have a running virtual machine.
$ getent group kvm
Add to your
hugetlbfs /dev/hugepages hugetlbfs mode=1770,gid=78 0 0
Of course the gid must match that of the
kvm group. The mode of
1770 allows anyone in the group to create files but not unlink or rename each other's files. Make sure
/dev/hugepages is mounted properly:
# umount /dev/hugepages # mount /dev/hugepages $ mount | grep huge
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,mode=1770,gid=78)
Now you can calculate how many hugepages you need. Check how large your hugepages are:
$ cat /proc/meminfo | grep Hugepagesize
Normally that should be 2048 kB ≙ 2 MB. Let's say you want to run your virtual machine with 1024 MB. 1024 / 2 = 512. Add a few extra so we can round this up to 550. Now tell your machine how many hugepages you want:
# echo 550 > /proc/sys/vm/nr_hugepages
If you had enough free memory you should see:
$ cat /proc/meminfo | grep HugePages_Total
If the number is smaller, close some applications or start your virtual machine with less memory (number_of_pages x 2):
$ kvm -m 1024 -mem-path /dev/hugepages [-hda yourimage.img] [-your_other_options]
-mem-path parameter. This will make use of the hugepages.
You can check now, while your virtual machine is running, how many pages are used:
$ cat /proc/meminfo | grep HugePages
HugePages_Total: 550 HugePages_Free: 48 HugePages_Rsvd: 6 HugePages_Surp: 0
Now that everything seems to work you can enable hugepages by default if you like. Either add to your
echo 550 > /proc/sys/vm/nr_hugepages
OR add to your
vm.nr_hugepages = 550
Bridged networking is used when you want your VM to be on the same network as your host machine. This will allow it to get a static or DHCP IP address on your network, and then you can access it using that IP address from anywhere on your LAN. The preferred method for setting up bridged networking for KVM is to use thepackage. You will also need to install .
For more information, see: Netcfg Tips#Configuring a bridge for use with virtual machines (VMs)
You can follow this page to configure the bridge: Libvirt#Bridged Networking
If you are using, it is recommended for performance and security reasons to disable the firewall on the bridge:
# cat >> /etc/sysctl.conf <<EOF net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 EOF # sysctl -p /etc/sysctl.conf
See the libvirt wiki and Fedora bug 512206. If you get errors by sysctl during init (boot) about non-existing files, add the
bridge kernel module to
/etc/modules-load.d/kvm.conf (otherwise, this module gets loaded automatically during network setup, which is after sysctl calls).
Alternatively, you can configureto allow all traffic to be forwarded across the bridge by adding a rule like this:
-I FORWARD -m physdev --physdev-is-bridged -j ACCEPT
To prevent the mouse from being grabbed when clicking on the guest operating system's windows, add the option
-usbdevice tablet. This means QEMU is able to report the mouse position without having to grab the mouse. This also overrides PS/2 mouse emulation when activated.
$ qemu-kvm -hda <Image_Name> -m 512 -vga std -usbdevice tablet
Mounting the QEMU image
There are many ways to mount partitions encapsulated in an image file or partition. One option is to use network block devices:
# modprobe nbd max_part=63 $ qemu-nbd -c /dev/nbd0 [image.img] # mount /dev/nbd0p1 [/mnt/qemu]
An alternative is to use
kpartx from the package:
$ kpartx -l [image.img] $ kpartx -a [image.img] # mount /dev/mapper/[image.img]p1 [/mnt/qemu]
The first command merely lists the partitions detected in the image's partition table, while the second one maps them using the kernel's device mapper. In order to remove the partition mapping again, the procedure is as follows:
# umount [/mnt/qemu] $ kpartx -d [image.img]
Starting KVM virtual machines on boot up
If you use virt-manager and virsh as your VM tools then this is very simple. At the commandline to set a VM to autostart:
$ virsh autostart <domain>
To disable autostarting:
$ virsh autostart --disable <domain>
Virt-manager is equally easy having an autostart check box in the boot options of the VM.
Note VMs started by QEMU or KVM from the command line are not then manageable by virt-manager.
For an alternative check QEMU#Starting_QEMU_virtual_machines_on_boot.
Tips and tricks
Since qemu-kvm 1.1 and libvirt 0.10 there is a slightly less talked-about feature of external snapshotting. Still being developed and improved by upstream. It allows you to take a live snapshot of a virtual machine without turning it off. The whole process works at block level by a series of steps utilizing QEMU's snapshot_blkdev/blockdev-snapshot-sync feature. The newer qemu-kvm uses the same methodology except it prefers QEMU's monitor feature instead. Currently it only works with qcow2 and raw file based images.
Once a snapshot is created, KVM attaches that new snapshotted image to virtual machine that is used as its new block device, storing any new data directly to it while the original disk image is taken offline which you can easily copy or backup. After that you can merge the snapshotted image to the original image, again without shutting down your virtual machine.
Here's how it works.
Current running vm
# virsh list --all Id Name State ---------------------------------------------------- 3 archey running
List all its current images
# virsh domblklist archey Target Source ------------------------------------------------ vda /vms/archey.img
Notice the image file properties
# qemu-img info /vms/archey.img image: /vms/archey.img file format: qcow2 virtual size: 50G (53687091200 bytes) disk size: 2.1G cluster_size: 65536
Create a disk-only snapshot. Switch --atomic makes sure that vm is not modified if snapshot creation fails
# create-snapshot-as archey snapshot1 --disk-only --atomic
List if you want to see the snapshots
# virsh snapshot-list archey Name Creation Time State ------------------------------------------------------------ snapshot1 2012-10-21 17:12:57 -0700 disk-snapshot
Notice the new snapshot image created by virsh and its image properties. It weighs just a few MiBs and is linked to its original "backing image/chain".
# qemu-img info /vms/archey.snapshot1 image: /vms/archey.snapshot1 file format: qcow2 virtual size: 50G (53687091200 bytes) disk size: 18M cluster_size: 65536 backing file: /vms/archey.img
At this point, you can go ahead and copy the original image with 'cp -sparse=true' or 'rsync -S'. Then you can merge the original image back into the snapshot.
# virsh blockpull --domain archey --path /vms/archey.snapshot1
Now that you have pulled the blocks out of original image, the file /vms/archey.snapshot1 becomes the new disk image. Check its disk size to see what it means. After that is done, the original image /vms/archey.img and the snapshot metadata can be deleted safely. The 'virsh blockcommit' would work opposite to 'blockpull' but it seems to be currently under development in qemu-kvm 1.3 (including snapshot-revert feature), scheduled to be released sometime next year.
This new feature of KVM will certainly come handy to the people who like to take frequent live backups without risking the filesystem corruption.
Poor Man's Networking
Setting up bridged networking can be a bit of a hassle sometimes. If the sole purpose of the VM is experimentation, one strategy to connect the host and the guests is to use SSH tunneling.
The basic steps are as follows:
- Setup an SSH server in the host OS
- (optional) Create a designated user used for the tunneling (e.g. tunneluser)
- Install SSH in the VM
- Setup authentication
When using the default user network stack, the host is reachable at address 10.0.2.2.
If everything works and you can SSH into the host, simply add something like the following to your
# Local SSH Server echo "Starting SSH tunnel" sudo -u vmuser ssh email@example.com -N -R 2213:127.0.0.1:22 -f # Random remote port (e.g. from another VM) echo "Starting random tunnel" sudo -u vmuser ssh firstname.lastname@example.org -N -L 2345:127.0.0.1:2345 -f
In this example a tunnel is created to the SSH server of the VM and an arbitrary port of the host is pulled into the VM.
This is a quite basic strategy to do networking with VMs. However, it is very robust and should be quite sufficient most of the time.
Pass all available host processor features:
Enable the virtio module for your network:
Same goes for your hard drive:
For more about paravitualisation (virtio) see this page.
If you have a raw image, disable the cache: