Lenovo ThinkPad Edge 13
Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary end
This article was written to assist you with getting archlinux run on the Lenovo ThinkPad Edge 13. It is meant to be help you with some tricky points aside to the Beginners' Guide: A guide through the whole process of installing and configuring Arch Linux; written for new or inexperienced users.
First and important to do is an BIOS-Update (As of 2010/08/20 to Version 1.19.)
This was done, by using grub4dos, one can get here. Because a simple dd didn't create a bootable USB-Stick for me.
Unpack it on another *nix-box and run:
sudo ./bootlace.com /dev/sdX
with /dev/sdX being your USB-Stick (as the Thinkpad Edge 13 has no CDROM-Drive) in the directory, where you unpacked your files.
Afterwards copy grldr and menu.lst to the device:
cp grldr /media/USBSTICK cp menu.lst /media/USBSTICK
Download the BIOS update from the BIOS section on this support site. Pick the one that matches your current BIOS Id. Copy the iso-file to the / directory of the USB-Stick!
Finally you have to add the following code to the menu.lst on your pendrive to make the USB-Stick boot the PC DOS program made by lenovo:
title Thinkpad-Edge-BIOS-UPDATE find --set-root /6yuj06uc.iso map /6yuj06uc.iso (0xff) || map --mem /6yuj06uc.iso (0xff) map --hook chainloader (0xff) boot
Inserting such a prepared USB-Stick into your Thinkpad Edge, and things should be self-explanatory after that.
Creating an installation medium
To create a bootable USB-Stick with the archlinux*.iso you downloaded, simply:
dd bs=8M if=archlinux*.iso of=/dev/sdX
which will/should behave like a regular bootable CD-Rom in addition to a capable BIOS and the correct bootsequence! In doubt or in case of problems see Install from a USB flash drive for more detailed instructions.
After that it is recommended to follow the usual installation procedure described in the Beginners' Guide up to the part 2, as the installation of the wireless lan card needs some further work.
WLAN driver installation
If you are using the rtl8192ce module, you may experience some intermittant deauthentication issues with newer kernels (tested on 3.4.4-2-ARCH). If this is the case, you need to add some options to /etc/modprobe.d/rtl8192ce.conf (courtesy of Lord_Lizard in this thread )
To get jack sensing to work add:
options snd-hda-intel model="olpc-xo-1_5"
If you have the AMD-AMD model you can use the free ati drivers.
pacman -S xorg-server xf86-video-ati
These drivers give enough horsepower for compiz and video playback.
A synaptics touchpad with two-finger scrolling.
pacman -S xf86-input-synaptics
The Turion work well with powernow-k8. Please refer to the wiki for more information on cpufrequtils. Dont forget to add powernow-k8 to your modules array.
Add the follwing line to your /etc/modprobe.d/modprobe.conf
options thinkpad_acpi fan_control=1
Then you can manually set your fanspeed with:
echo level 7 > /proc/acpi/ibm/fan cat /proc/acpi/ibm/fan # for more commands. # Other files will report their status and commands when read too.
Works out of the box. Test with
mplayer tv:// -tv driver=v4l2
If you use skype and the video is way to dark, skype forgot to enable automatic exposure control. Install v4l2 control and set it yourself. You need to to do it everytime you use skype.
pacman -S v4l2-utils v4l2-utils -c exposure_auto_priority 1
Your video should gradually begin to brighten up. More options:
First, you might need to add the following to your kernel commandline if suspend does not work. Newer models do not require the following hacks, so make sure that neither suspend nor wifi works.
kernel root= ... acpi_osi=linux noapic
Second, your wifi card will delay resume by roughly 2 minutes. That means that your laptop is not frozen but still resuming. Wifi wont want to work, too. This can be worked around by removing the wifi modules before suspend. You can do this automatically if you use pm-utils. Please refer for more information to the pm-utils wiki article. Below follows my /etc/pm/sleep.d/100wifiworkaround.sh script for automation
#!/bin/bash # case $1 in hibernate) ifconfig wlan0 down rmmod rtl8192ce rmmod r8169 ;; thaw) modprobe rtl8192ce # Pulls r8169 in ;; sleep) ifconfig wlan0 down rmmod rtl8192ce rmmod r8169 ;; resume) modprobe rtl8192ce ;; *) echo "I dont do that. Read me first please." ;; esac