Difference between revisions of "Lenovo ThinkPad T400"

From ArchWiki
Jump to: navigation, search
(Graphics/Xorg Configuration: Remove out of date info. xorg.conf not needed anymore.)
(Intel chipset: just need linux-firmware now)
Line 39: Line 39:
The drivers are included in the 2.6.27 kernel. However, it's important to make sure that you have the correct firmware. I installed the iwlwifi-5000-ucode. See [[Wireless#iwl3945.2C_iwl4965_and_iwl5000-series|this section]] for more details.
The drivers are included in the 2.6.27 kernel. However, it's important to make sure that you have the correct firmware. I installed the iwlwifi-5000-ucode. See [[Wireless#iwl3945.2C_iwl4965_and_iwl5000-series|this section]] for more details.
Since the 2.6.34 kernel update, the firmware files were moved to the {{ic|linux-firmware}} package. Manually installing other firmware packages is not required.
====Realtek chipset====
====Realtek chipset====

Revision as of 19:31, 20 May 2013

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary end

Tango-edit-clear.pngThis article or section needs language, wiki syntax or style improvements.Tango-edit-clear.png

Reason: Numerous spelling, grammar, and style issues. (Discuss in Talk:Lenovo ThinkPad T400#)

System Specification

Note, ThinkPad T400 is available in a few hardware variants. Check the ThinkWiki where details of hardware specification are discussed in the T400 category.

Below is an overview of the T400 specifications as originally used to start this article:

  • CPU : Intel® Core™2 Duo Processor T9400 (6M Cache, 2.53 GHz, 1066 MHz FSB)
  • Memory : 3GB PC3-8500 DDR3
  • WiFi : Intel WiFi Link 5300
  • Hard-Drive : 160GB, 7200rpm
  • Optical Drive : DVD Recordable
  • Integrated Graphics : Intel 4500MHD
  • Discrete Graphics : AMD M82XT Hybrid 256 MB (ATI Mobility Radeon HD 3470)
  • Screen : 14.1" WXGA+ TFT with LED Backlight
  • Gigabit Ethernet, Modem
  • Express Card & PC Card Slots
  • Integrated Bluetooth PAN
  • No camera
  • No fingerprint reader
  • No Intel Turbo Memory



The kernel module to get the network card to work is e1000e.


Lenovo offers different options in wireless hardware:

Intel chipset

  • Wifi link 5100 and 5300

The drivers are included in the 2.6.27 kernel. However, it's important to make sure that you have the correct firmware. I installed the iwlwifi-5000-ucode. See this section for more details.

Since the 2.6.34 kernel update, the firmware files were moved to the linux-firmware package. Manually installing other firmware packages is not required.

Realtek chipset

  • Rtl8192SE
 11b/g/n Wireless Lan Mini-PCI Express Adapter II
 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)

See http://www.thinkwiki.org/wiki/ThinkPad_11b/g/n_Wireless_LAN_Mini-PCI_Express_Adapter_II for more details.

See Wireless Setup#rtl8192s.


There is a module "hsfmodem" provided by http://www.linuxant.com/.


If you have thinkpad-acpi kernel module loaded, you can enable and disable Bluetooth from command line. To enable:

# echo 1 > /sys/devices/platform/thinkpad_acpi/bluetooth_enable

To disable:

# echo 0 > /sys/devices/platform/thinkpad_acpi/bluetooth_enable

To disable or enable Bluetooth at startup, add one of the above commands to /etc/rc.local.

The bluetooth module requires uhci_hcd. Make sure /etc/modprobe.d/modprobe.conf does not blacklist it.

For everything else related to Bluetooth, follow the procedure described in Bluetooth section of the Arch Wiki.

Graphics/Xorg Configuration

Note that it's possible to switch the graphics adapter by only restarting X, but It's quite useless since you can't power up/down a graphic-card without rebooting. So it's either both graphic-card on at all times, or do the switching in the BIOS.

So please press the ThinkVantag-button» during boot up and enable either the Integrated or the Discrete graphics cards in your BIOS's "Config->Display" menu.

Integrated Graphics

After installing xorg, I installed the xf86-video-intel drivers.

Discrete Graphics

All 3 ATI drivers worked. That is both open-source drivers (xf86-video-ati and xf86-video-radeonhd) and fglrx (the catalyst proprietary drivers).

I could not get the xf86-video-radeonhd drivers to detect my external monitor, but xf86-video-ati worked fine. Remember to remove catalyst and catalyst-utils and reboot before using an open source ATI drivers. ATI uses its own OpenGL library in its proprietary drivers, which is included in catalyst-utils and conflicts with libgl. As it did with the integrated graphics, running X -configure generated a working xorg.conf.

To get the catalyst drivers working, you do have to configure your xorg.conf properly. I used aticonfig --initial to generate a working xorg.conf. I did encounter a problem that I have not been able to solve yet : resizing a window in a compositing window manager takes 1-2 seconds. This makes the drivers pretty much unusable.

Switchable Graphics

Is currently not supported by the kernel. You can enable switchable-graphics in the BIOS and make Xorg do the switching, but then both cards will always use power and generate lots of heat. See the gentoo-wiki to keep up too date on the issue.

You can also try David Arlile's patch to power off the unused card. See http://airlied.livejournal.com/71434.html and http://linux-hybrid-graphics.blogspot.com/.


If you want to enable hotplugging you probably do not need a xorg.conf. But if you are using xf86-video-ati you might temporarely need to disable KMS, by adding "nomodeset" to your kernel-line in "/boot/grub/menu.lst". If you do not want to disable KMS you can probably install some radeon firmware, see the Ati-wiki.

Since all the mouse/keyboard configuration is taken care of by HAL you will need some config files in "/etc/hal/fdi/policy/" For instant "mouse-wheel.fdi" to enable TrackPoint-scrolling:

 <match key="info.product" string="TPPS/2 IBM TrackPoint">
   <merge key="input.x11_options.EmulateWheel" type="string">true</merge>
   <merge key="input.x11_options.EmulateWheelButton" type="string">2</merge>
   <merge key="input.x11_options.YAxisMapping" type="string">4 5</merge>
   <merge key="input.x11_options.XAxisMapping" type="string">6 7</merge>
   <merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
   <merge key="input.x11_options.EmulateWheelTimeout" type="string">200</merge>

More information in the TrackPoint can be found here: http://www.thinkwiki.org/wiki/How_to_configure_the_TrackPoint. The Keyboard layout is controlled by "/etc/hal/fdi/policy/10-keymap.fdi" Modify it like this to change your layout. If you have any more questions on hotplugging (like how to enable tapping), take a look at it's wiki page.

Synaptic, UltraNav

If you want to be able to use horizontal and vertical scroll with your touchpad add this lines to your xorg.conf

Section "Module"
 Load    "synaptics"

Section "InputDevice"
 Identifier  "Touchpad"
 Driver    "synaptics"
 Option    "AlwaysCore"
 Option    "Device" "/dev/input/mouse1"
 Option    "Protocol" "auto-dev"
 Option    "SendCoreEvents"  "true"
 Option    "LeftEdge"    "1632"
 Option    "RightEdge"     "5312"
 Option    "TopEdge"     "1575"
 Option    "BottomEdge"    "4281"
 Option    "FingerLow"     "25"
 Option    "FingerHigh"    "30"
 Option    "MaxTapTime"    "180"
 Option    "MaxTapMove"    "220"
 Option    "VertScrollDelta"   "100"
 Option    "MinSpeed"    "0.06"
 Option    "MaxSpeed"    "0.12"
 Option    "AccelFactor"     "0.0010"
 Option    "VertEdgeScroll"  "on"
 Option    "HorizEdgeScroll"   "on"
 # Option HorizScrollDelta""0"                               
 Option    "SHMConfig"   "on"

for trakpoint with third button paste & scroll add this few lines to xorg.conf too

Section "InputDevice"
 Identifier  "Trackpoint"
 Driver      "mouse"
 Option "CorePointer"
 Option "Device" "/dev/input/mice"
 Option "Protocol" "Auto"
 Option "Emulate3Buttons"
 Option "Emulate3Timeout" "50"
 Option "EmulateWheel" "on"
 Option "EmulateWheelTimeout" "200" # adjust third button paste timeout. 
 Option "EmulateWheelButton" "2"
 Option "YAxisMapping" "4 5"
 Option "XAxisMapping" "6 7"
 Option "YAxisMapping" "4 5"

finally update your layout

Section "ServerLayout"
 InputDevice    "Trackpoint" "CorePointer"
 InputDevice    "Touchpad"
 InputDevice    "Keyboard0" "CoreKeyboard"


Once you have ALSA installed, fire up alsamixer and make sure that sound is not muted. You might also want to press the Volume Up or Volume Down button. It seems than the Mute button mutes everything, even system beeps. Pressing the Volume Up or Volume Down button can unmute, but not pressing the Mute button again.

Here's the modules I have loaded that are relevant to sound :

  $ lsmod | grep snd
  snd_seq_oss            35584  0
  snd_seq_midi_event      9344  1 snd_seq_oss
  snd_seq                58336  4 snd_seq_oss,snd_seq_midi_event
  snd_seq_device          9364  2 snd_seq_oss,snd_seq
  snd_hda_intel         474672  2
  snd_hwdep              10632  1 snd_hda_intel
  snd_pcm_oss            45568  0
  snd_pcm                82440  2 snd_hda_intel,snd_pcm_oss
  snd_timer              24720  2 snd_seq,snd_pcm
  snd_page_alloc         10640  2 snd_hda_intel,snd_pcm
  snd_mixer_oss          18944  1 snd_pcm_oss
  snd                    64840  16    snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
  soundcore               9632  1 snd

Additionally, there is a patch for the audio driver for conexant's chipsets provided by http://www.linuxant.com which can be downloaded at http://www.linuxant.com/alsa-driver/.

Multimedia Keys

The screen brightness controls and the flashlight work without any tweaking. The other keys can be mapped using xev and xbindkeys. By following this guide you should be able to get everything working, but here's summary :

  • First, open a terminal and type xev. This starts the "Event tester".
  • Place your cursor on the "Event tester" window.
  • When you press a key on your keyboard or move your mouse, it should get displayed in a terminal. For instance, this is what shows up if you press Fn+F2
   KeyRelease event, serial 33, synthetic NO, window 0x3000001,
   root 0x86, subw 0x0, time 5537544, (76,110), root:(81,938),
   state 0x0, keycode 146 (keysym 0x0, NoSymbol), same_screen YES,
   XLookupString gives 0 bytes:
   XFilterEvent returns: False

It basically says that keycode 146 is not bound (NoSymbol). Here are all the keycodes of all multimedia buttons:

  Volume Down : keycode 174
  Volume Up : keycode 176
  Fn+F2 : keycode 146
  Fn+F3 : keycode 241
  Fn+F4 : keycode 223
  Fn+F5 : Not responding to events ??
  Fn+F7 : keycode 214
  Fn+F8 : keycode 249
  Fn+F9 : keycode 207
  Fn+F12 : keycode 165
  Fn+Up : keycode 164
  Fn+Down : keycode 162
  Fn+Left : keycode 144
  Fn+Right : keycode 153
  Fn+Home : keycode 212
  Fn+End : keycode 101
  • Type xmodmap -pke > ~/.Xmodmap in a terminal. This creates a file, .Xmodmap, containing your current keyboard mapping.
  • Now open the file with a text editor and find the keycodes you're interested in. You can map any keycode with a symbol from this list.
  • To get your new .Xmodmap loaded when you start X, just add xmodmap ~/.Xmodmap to your .xinitrc.
  • To get your new .Xmodmap loaded immediately, type xmodmap ~/.Xmodmap in a terminal.

You can now assign functions to your newly bound keys by using facilities provided by your window desktop environment or by using xbindkeys.

To use xbindkeys,

  • Start by installing it
  pacman -S xbindkeys
  • Then add xbindkeys & to your .xinitrc.
  • And finally, in your home directory, create a file called .xbindkeysrc.scm with content that would look something like
  (xbindkey '("XF86Standby") "sudo killall dhcpcd && sudo pm-suspend")
  (xbindkey '("XF86AudioRaiseVolume") "amixer set Master 2dB+ unmute")
  (xbindkey '("XF86AudioLowerVolume") "amixer set Master 2dB- unmute")

Note, in more recent Arch (kernel 3.4.2, xorg-server 1.12.2, laptop-mode-tools 1.61), on the T400, related keys combinations binding seems to be:

  • Fn+2 → XF86ScreenSaver
  • Fn+4 → XF86Sleep & XF86Wakeup
  • Fn+12 → XF86Suspend

Now, the actual action will performed on XF86Sleep or XF86Suspend is configurable in session policy, so it may vary (e.g. depending on desktop environment). If nomenclature of XF86Standby, XF86Hibernate or XF86Sleep is confusing, check the thread suspend / hibernate nomenclature for in-depth explanation.


To get the mute button to work, it is necessary to pass the string acpi_osi="Linux" to the kernel as a boot parameter. In GRUB2, add it to the "linux" line. See here for more details.

With the 3.1 bios, it seems that the mute button works normally (set it up the same as the volume buttons with, for instance, "amixer set Master toggle").


To enable the fan speed control, it's necessary to load the thinkpad_acpi with option fan_control=1. After the thinkpad_acpi module is loaded with this option, you can monitor and adjust the fan speed via /proc/acpi/ibm/fan.


People have been having issues with suspend resume with the current intel xf86-video-intel drivers in combination with the 4500mhd chipset. This is apparently an issue with concurrency as adding the following script (with mod 755) in /etc/pm/sleep.d fixes things. to some extent...

# Workaround for concurrency bug in xserver-xorg-video-intel 2:2.4.1-1ubuntu10.
# Save this as /etc/pm/sleep.d/00CPU 

. "/usr/lib/pm-utils/functions"
case "$1" in
		for i in /sys/devices/system/cpu/cpu*/online ; do
			echo 0 >$i
		sleep 10	# run with one core for 10 secs
		for i in /sys/devices/system/cpu/cpu*/online ; do
			echo 1 >$i

From http://ubuntu-virginia.ubuntuforums.org/showpost.php?p=6105510&postcount=12 petri4 on the ubuntu forums.

7-1 Media Card Reader

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: rc.conf (Discuss in Talk:Lenovo ThinkPad T400#)

Tested for SD cards only. Works after loading modules sdhci and ricoh_mmc in /etc/rc.conf. Sometimes there are problems initializing the SD card (check dmesg) after inserting it. In such cases, try re-inserting it again.