Difference between revisions of "Lenovo ThinkPad T420"
(update Pkg/AUR templates to reflect new package status)
(update link(s) (avoid redirect))
|Line 67:||Line 67:|
=== CPU frequency scaling ===
=== CPU frequency scaling ===
[[CPU |CPU frequency scaling]] is fully supported with all of the available processor models with this laptop.
=== Fans ===
=== Fans ===
Revision as of 21:40, 9 April 2014
zh-CN:Lenovo ThinkPad T420 This article covers the installation and configuration of Arch Linux on a Lenovo T420 laptop.
- 1 Installation
- 2 Hardware
- 3 Laptop Settings
- 4 Troubleshooting
- 5 See also
This laptop supports UEFI as well as the traditional BIOS.
There are no issues with installing Arch Linux with the latest Archiso.
The rest of the installation process can be followed with the Installation guide.
All hardware works out of the box except the following:
Fingerprint reader works great with fprint and PAM (installation of fingerprint-gui recommended).
See Fprint#Setup_fingerprint-gui for more information.
Some Media keys
- See Media Keys
ACPI is well supported here. No obvious troubleshoots.
Unfortunately, tp_smapi is only partially supported on the Thinkpad T420. A number of features work since version 0.41. For example, the hard drive protection mechanism HDAPS now works well. See the linked wiki entry.
Some features like setting the starting threshold for charging the battery do not yet work. To control the battery charging thresholds, install the Perl script AUR.AUR from the
acpi_call kernel module by running
Manually set the thresholds by calling
perl /usr/lib/perl5/vendor_perl/tpacpi-bat -v startChargeThreshold 0 40 perl /usr/lib/perl5/vendor_perl/tpacpi-bat -v stopChargeThreshold 0 80
The example values 40 and 80 given here represent the percentage of full battery capacity remaining. Adjust them to your own needs. You may also want to write a simple
set-battery.service and enable it to set them at startup. While these values should be permanent, they will be reset any time the battery is removed.
[Unit] Description=Set battery capacity [Service] Type=oneshot ExecStart=/usr/bin/perl /usr/lib/perl5/vendor_perl/tpacpi-bat -v stopChargeThreshold 0 80 ExecStart=/usr/bin/perl /usr/lib/perl5/vendor_perl/tpacpi-bat -v startChargeThreshold 0 40 [Install] WantedBy=multi-user.target
Also, if you are dual booting with Windows, you can still control the battery charging thresholds with Lenovo's Power Manager which communicates directly to the battery controller.
When using systemd, you may want to blacklist the tp_smapi module if your systemd-modules-load.service fails, as new ThinkPads handle everything over acpi.
CPU frequency scaling
CPU frequency scaling is fully supported with all of the available processor models with this laptop.
InstallAUR from the AUR. It will automatically create the necessary acpi configuration file in "/usr/lib/modprobe.d/thinkpad_acpi.conf".
Copy the example sensor settings file from "/usr/share/doc/thinkfan/examples/thinkfan.conf.simple" to "/etc/thinkfan.conf".
sudo cp /usr/share/doc/thinkfan/examples/thinkfan.conf.simple /etc/thinkfan.conf
Aftwards replace the default sensor in the settings file
/etc/thinkfan.conf with the following.
sudo nano /etc/thinkfan.conf
Alternatively, sensors can be generated using following command. Add
sensor before the sensor lines.
find /sys/devices -type f -name "temp*_input"
In the same configuration file replace the default fan level settings with your needs (the last lines of the file). Useful values are
(0, 0, 42) (1, 40, 47) (2, 45, 52) (3, 50, 57) (4, 55, 62) (5, 60, 67) (6, 65, 72) (7, 70, 77) (127, 75, 32767)
sudo systemctl enable thinkfan
Laptop Mode Tools
No significant issues were found using Laptop Mode Tools.
Possible bug with #Shutdown on Battery
AUR is an alternative tool that can replace AUR.From the
TouchPad and TrackPoint do work out of the box, but the TouchPad is way too sensitive (i.e. fast) to be usable, since it is recognized as a mouse. To fix this, install the package and add the following two files to your
Section "InputClass" Identifier "ThinkPad TrackPoint" MatchProduct "TPPS/2 IBM TrackPoint" MatchDevicePath "/dev/input/event*" Option "EmulateWheel" "true" Option "EmulateWheelButton" "2" Option "XAxisMapping" "6 7" Option "YAxisMapping" "4 5" EndSection
Section "InputClass" Identifier "two finger scrolling" Driver "synaptics" MatchProduct "SynPS/2 Synaptics TouchPad" MatchDevicePath "/dev/input/event*" Option "VertTwoFingerScroll" "on" Option "HorizTwoFingerScroll" "on" Option "EmulateTwoFingerMinW" "8" Option "EmulateTwoFingerMinZ" "40" Option "TapButton1" "1" EndSection
Adjust to your own needs. Read Touchpad Synaptics for more information.
To adjust the speed/sensitivity of the TrackPoint add these lines in a systemd tmpfile:
w /sys/devices/platform/i8042/serio1/speed - - - - 180 w /sys/devices/platform/i8042/serio1/sensitivity - - - - 200
Possible range of values are 1-255.
Bumblebee works as intended on models with NVIDIA Optimus
Optional kernel boot arguments
Using the following kernel boot parameters reduces battery drain:
i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 i915.semaphores=1
Media keys that work out of the box:
- Wireless On/Off
- Backlight Brightness settings
Media Keys that Do Not work out of the box:
You must find a workaround and bind the keys yourself for the rest of them.
Rebind Forward and Back keys
Keys forward and back (next to cursor keys) can be easily remapped to PageDown/PageUp.
Install xmodmap with the package
~/.Xmodmap file with content:
keysym XF86Back = Page_Up keysym XF86Forward = Page_Down
Add this line to your
~/.xinitrc to make it work:
You can also re-map AudioPrev (
Fn+Left) and AudioNext (
Fn+Right) to Home/End:
keysym XF86AudioNext = End keysym XF86AudioPrev = Home
- You have to log out for the changes to take effect.
- The keys should work out of the box, at least on KDE.
Turn touchpad on and off
For some, the (
Fn+F8) key does not switch the touchpad on and off. Here is a simple keybind to add to your
~/.xbindkeysrc for keys to quickly change your touchpad state. For these to take effect, run
xbindkeysrc. This binds
Fn+F8 to 'toggle the touchpad on and off'. (Tested in i3wm and xfce4, where normal
Fn+F8 does not toggle the touchpad)
# Toggle the Touchpad on|off "synclient TouchpadOff=$(synclient -l | grep -ce TouchpadOff.*0)" m:0x0 + c:199 XF86TouchpadToggle
Volume up/down not changing volume
Another quick keybind for
~/.xbindkeysrc to change the volume (which does not work on some DEs). Again, run
xbindkeys for these to take effect. Taken from Xbindkeys
#increase volume "amixer set Master playback 1+" m:0x0 + c:123 XF86AudioRaiseVolume
#decrase volume "amixer set Master playback 1-" m:0x0 + c:122 XF86AudioLowerVolume
Also, while the mute button works, I rebound it to interface with ALSA.
# Toggle mute "amixer set Master toggle" m:0x0 + c:121 XF86AudioMute
Shutdown on battery
Some users have reported that the T420 was rebooting on shutdown on battery power. There have been quite a few attempts to fix this. Three are detailed here.
One way is to disable the module
ehci_hcd. See Kernel_modules#Blacklisting for more information.
Or try disable Laptop-mode.
!laptop-mode to the
DAEMONS array in
This forum post details another way to have your computer not reboot on shutdown. Turning off the
laptop-mode daemon causes battery life to suffer, so when on the move and in need of a simple way to shutdown, this seems to work better.
Hang on reboot
This is a problem on many laptops and can be fixed by blacklisting the
e1000e kernel module.
No backlight controls
One user has reported that the brightness controls (fn+home, fn+end) did not work in some desktop environments. This could be fixed by adding the following kernel options:
Also try to adjust the display in the console and not in X windows. If you don't have the keybindings correct in X, it will cause a problem. This can be bypassed if you use a virtual console to adjust the brightness.