Lenovo ThinkPad T530
|Model:||Lenovo ThinkPad T530|
|CPU:||Intel Core i5-3210M|
|Ram:||8GB DDR3 1600|
|Hard Drive:||default: 320GP 7200rpm|
|Integrated Video:||Intel HD 4000|
|Dedicated Graphics:||NVIDIA NVS 5400M - 1GB (with Optimus Technology)|
|Optical:||DVD-RW (UBE w/SWR)|
|WiFi Chipset:||Realtek Semiconductor RTL8188CE|
- You can follow the Beginners' Guide for this
- Basically everything that is there is what is needed, I will expand on the extra configs and weird tweaks that may be needed.
- Go up to not through the GUI configurations, since we may be changing some things.
- Works by default for me
You should have installed theand packages.
Also, I am going to assume that you have the same set-up as me so you'll need to do the following items.
I was in process of configuring Bumblebee, but after trying it both ways on my T530 - I don't really see a huge gain for the pain. So I dropped it. In my specific case, if I really need the (potential) extension to the battery life, you can just turn off the Dedicated card in the BIOS.
Note, I do not have Systemd up - so I am not including that stuff (most default users won't at this point either).
Intel HD 4000
You will need to install thepackage.
$ pacman -S xf86-video-intel
NVIDEA NVS 5400M
Now you have a few options as far as what driver to use.
Arch recommends thedriver, which is Open Source. However, while it has fast 2D, it only has basic 3D support and does not fully support power saving at this point.
The other option is the nvidia page for config.package, which supports 3D and provides power saving. That being said, however, it will take some configuration to get it right. See the
You need to add a new file to handle the TrackPoint events (mostly the Middle Button handling horizontal and vertical scrolling, the MiddleClick works by default).
/etc/X11/xorg.conf.d/10-trackpoint.conf with these contents:
Section "InputClass" Identifier "Trackpoint Wheel Emulation" MatchProduct "TPPS/2 IBM TrackPoint|DualPoint Stick|Synaptics Inc. Composite TouchPad / TrackPoint|ThinkPad USB Keyboard with TrackPoint|USB Trackpoint pointing device" MatchDevicePath "/dev/input/event*" Option "EmulateWheel" "true" Option "EmulateWheelButton" "2" Option "Emulate3Buttons" "false" Option "XAxisMapping" "6 7" Option "YAxisMapping" "4 5"}} EndSection
Once you reboot - you should be good-to-go with both vertical and horizontal scrolling while holding the middle TrackPoint button.
- Anything systemd related