Difference between revisions of "Lenovo ThinkPad X1"

From ArchWiki
Jump to: navigation, search
(→‎UEFI: fix links)
(→‎ACPI: remove section since ACPI doesn't catch all keys. Instead recommend XF86 keys)
(14 intermediate revisions by 5 users not shown)
Line 25: Line 25:
 
Due to the fact that there is no optical drive, you need to [[USB Installation Media|install Arch from USB stick]].
 
Due to the fact that there is no optical drive, you need to [[USB Installation Media|install Arch from USB stick]].
  
−
The lazy way to install is just default installation, works flawlessly. Installed system will boot in legacy-BIOS mode.
+
=== Legacy-BIOS ===
 +
 
 +
This procedure is far less involved then UEFI and works perfectly.
 +
 
 +
In order to turn off UEFI booting you will need to boot into your BIOS and change the boot mode to Legacy. Afterward, follow the [[Beginner's Guide]] for standard installation instructions.
  
 
=== UEFI ===
 
=== UEFI ===
  
−
{{Note|This procedure reflects a single user's experience, and no attempt was made to experiment with different settings.}}
+
Installation from UEFI bootable USB works with the default bootloader, so rEFInd is unnecessary. In the BIOS under Startup, set "UEFI/Legacy Boot" to UEFI only.
 +
The default partition table (and Windows installation) uses MBR. For UEFI, reformat the disk as GPT.
 +
 
 +
Booting using an [[UEFI Bootloaders#Using efibootmgr entry|efibootmgr entry]] works well. The warnings about incompatibility and embedding arguments to do not apply.
 +
 
 +
== Hardware ==
 +
 
 +
Almost everything works out of the box. Install synaptics and video-intel drivers.
  
−
Download the [https://www.archlinux.org/download/ official ISO] or create your own using something like [[Archiso]]. Follow the instructions for [[UEFI#Create UEFI bootable USB from ISO|creating a UEFI bootable USB]] from the ISO. Note that the default bootloader works fine so there's no need to install an alternative one like rEFInd. In the BIOS under Startup, set "UEFI/Legacy Boot" to UEFI only and turn off CSM support (this step might not be necessary, try skipping it first if you like).
+
=== Fingerprint Reader ===
  
−
Upon saving your changes and restarting, the UEFI boot options from the USB stick should come up and you can proceed to installing Arch.
+
[[fingerprint-gui]] from the [[AUR]] is already patched to work with the X1's newer fingerprint reader. To get the gui's dropdown to recognize your device, you'll have to add your user to the {{ic|plugdev}} group:
  
−
It appears that the default partition table (and Windows installation) uses MBR. To use UEFI, you should reformat the disk as GPT (wiping the drive in the process). Follow the instructions for [[UEFI#Create an UEFI System Partition in Linux|creating the EFI system partition]]. {{ic|gdisk}} recommends a size of 300M. Follow the [[Beginner's Guide]] to see how to correctly generate (and then fix) the fstab entry for the ESP.
+
{{bc|# gpasswd -a <username> plugdev}}
  
−
Booting using an efibootmgr entry is quite simple (and doesn't require any extra packages). Simply follow the instructions for [[UEFI Bootloaders#Setting up EFISTUB|creating the EFISTUB]] and adding the [[UEFI Bootloaders#Using efibootmgr entry|efibootmgr entry]]. The note about Lenovo Thinkpads truncating the UEFI options doesn't apply to the X1: the recommended efibootmgr entry works fine. The note about escaping the backslashes in the initrd path '''does''' apply, verify with {{ic|efibootmgr -v}} that the boot entry doesn't have any missing characters.
+
It has been seen that the relevant udev rules do not get set properly. To do this, open {{ic|/usr/lib/udev/rules.d/40-libbsapi.rules}} with your favorite text editor to add (or create with) the following lines:
  
−
== Hardware ==
+
{{hc|/usr/lib/udev/rules.d/40-libbsapi.rules|
 +
ATTRS{idVendor}&#61;&#61;”147e”, ATTRS{idProduct}&#61;&#61;”2020″,  SYMLINK+&#61;”input/touchchip-%k”, MODE&#61;”0664″, GROUP&#61;”plugdev”
 +
ATTRS{idVendor}&#61;&#61;”147e”, ATTRS{idProduct}&#61;&#61;”2020″,  ATTR{power/control}&#61;&#61;”*”, ATTR{power/control}&#61;”auto”
 +
}}
 +
 
 +
Restart your computer for the group and udev changes to take effect.
 +
 
 +
=== Adjusting Backlight Brightness ===
  
−
Just everything works out of the box.
+
Add acpi_osi="!Windows 2012" to GRUB_CMDLINE_LINUX in /etc/default/grub. (See https://bbs.archlinux.org/viewtopic.php?id=158775).
−
I installed only synaptics and video-intel drivers.
 
  
 
== Power management ==
 
== Power management ==
  
 
Just consult [https://wiki.archlinux.org/index.php/Laptop Laptop] page to read about [https://wiki.archlinux.org/index.php/tp_smapi tp_smapi], [https://wiki.archlinux.org/index.php/pm-utils pm-utils], [https://wiki.archlinux.org/index.php/Uswsusp uswsusp] and [https://wiki.archlinux.org/index.php/Acpid acpid].
 
Just consult [https://wiki.archlinux.org/index.php/Laptop Laptop] page to read about [https://wiki.archlinux.org/index.php/tp_smapi tp_smapi], [https://wiki.archlinux.org/index.php/pm-utils pm-utils], [https://wiki.archlinux.org/index.php/Uswsusp uswsusp] and [https://wiki.archlinux.org/index.php/Acpid acpid].
 +
 +
Tp_smapi does not seem to work at all.
  
 
Suspend works fine, even with status indicator.
 
Suspend works fine, even with status indicator.
  
−
== Other notes ==
+
== Extra Keys ==
  
−
I will improve this page after several days using this laptop. Today is mine first day of it.
+
The sleep, wifi, brightness, and keyboard backlight keys all work out of the box. All of the others (volume, media, etc.) can be bound using the standard X labels:
 +
{{bc|XF86ScreenSaver
 +
XF86WebCam
 +
XF86Display
 +
XF86AudioPrev
 +
XF86AudioPlay
 +
XF86AudioNext
 +
XF86AudioMute
 +
XF86AudioLowerVolume
 +
XF86AudioRaiseVolume
 +
XF86AudioMicMute
 +
XF86Launch1 # the black button above F6
 +
}}

Revision as of 04:20, 3 September 2013

Model description

Lenovo ThinkPad X1, Sandy Bridge (Core i5, 2,5 GHz), NWG2MRT This model has SSD 80/HDD 320 pair. Comes without optical drive. Has UEFI BIOS with BIOS-legacy fallback mode. Has Windows 7 Pro pre-installed, with tons of bloatware (bing toolbar, big Lenovo superbar button et all) pre-installed, too.

Drive space customization

By default: 

- SSD: two WinRE partitions and one Windows system partition
- HDD: blank

I've chosen to: 

- leave WinRE untouched (there are two such partitions)
- use SSD for my root partition
- use HDD for swap, /home, /var (~30 Gb, pacman cache goes here), /tmp

Installation method

Note: If you'd like to create Windows recovery flash drive, do it before Arch installation with the help of autorun located at recovery partition, from your installed Windows system.

Due to the fact that there is no optical drive, you need to install Arch from USB stick.

Legacy-BIOS

This procedure is far less involved then UEFI and works perfectly.

In order to turn off UEFI booting you will need to boot into your BIOS and change the boot mode to Legacy. Afterward, follow the Beginner's Guide for standard installation instructions.

UEFI

Installation from UEFI bootable USB works with the default bootloader, so rEFInd is unnecessary. In the BIOS under Startup, set "UEFI/Legacy Boot" to UEFI only. The default partition table (and Windows installation) uses MBR. For UEFI, reformat the disk as GPT.

Booting using an efibootmgr entry works well. The warnings about incompatibility and embedding arguments to do not apply.

Hardware

Almost everything works out of the box. Install synaptics and video-intel drivers.

Fingerprint Reader

fingerprint-gui from the AUR is already patched to work with the X1's newer fingerprint reader. To get the gui's dropdown to recognize your device, you'll have to add your user to the plugdev group: 

# gpasswd -a <username> plugdev

It has been seen that the relevant udev rules do not get set properly. To do this, open /usr/lib/udev/rules.d/40-libbsapi.rules with your favorite text editor to add (or create with) the following lines: 

/usr/lib/udev/rules.d/40-libbsapi.rules
ATTRS{idVendor}==”147e”, ATTRS{idProduct}==”2020″,   SYMLINK+=”input/touchchip-%k”, MODE=”0664″, GROUP=”plugdev”
ATTRS{idVendor}==”147e”, ATTRS{idProduct}==”2020″,   ATTR{power/control}==”*”, ATTR{power/control}=”auto”

Restart your computer for the group and udev changes to take effect.

Adjusting Backlight Brightness

Add acpi_osi="!Windows 2012" to GRUB_CMDLINE_LINUX in /etc/default/grub. (See https://bbs.archlinux.org/viewtopic.php?id=158775).

Power management

Just consult Laptop page to read about tp_smapi, pm-utils, uswsusp and acpid.

Tp_smapi does not seem to work at all.

Suspend works fine, even with status indicator.

Extra Keys

The sleep, wifi, brightness, and keyboard backlight keys all work out of the box. All of the others (volume, media, etc.) can be bound using the standard X labels: 

XF86ScreenSaver
XF86WebCam
XF86Display
XF86AudioPrev
XF86AudioPlay
XF86AudioNext
XF86AudioMute
XF86AudioLowerVolume
XF86AudioRaiseVolume
XF86AudioMicMute
XF86Launch1 # the black button above F6
Retrieved from "https://wiki.archlinux.org/index.php?title=Lenovo_ThinkPad_X1&oldid=274204"