Difference between revisions of "Lenovo ThinkPad X1"

From ArchWiki
Jump to: navigation, search
(Installation method: added details for installing in UEFI mode)
(UEFI: add info for creating/mounting partitions)
Line 33: Line 33:
 
Download the [https://www.archlinux.org/download/ official ISO] or create your own using something like [[Archiso]]. Follow the instructions for [[UEFI#Create UEFI bootable USB from ISO|creating a UEFI bootable USB]] from the ISO. Note that the default bootloader works fine so there's no need to install an alternative one like rEFInd. In the BIOS under Startup, set "UEFI/Legacy Boot" to UEFI only and turn off CSM support (this step might not be necessary, try skipping it first if you like).
 
Download the [https://www.archlinux.org/download/ official ISO] or create your own using something like [[Archiso]]. Follow the instructions for [[UEFI#Create UEFI bootable USB from ISO|creating a UEFI bootable USB]] from the ISO. Note that the default bootloader works fine so there's no need to install an alternative one like rEFInd. In the BIOS under Startup, set "UEFI/Legacy Boot" to UEFI only and turn off CSM support (this step might not be necessary, try skipping it first if you like).
  
Upon saving your changes and restarting, the UEFI boot options from the USB stick should come up and you can proceed to installing Arch as usual.
+
Upon saving your changes and restarting, the UEFI boot options from the USB stick should come up and you can proceed to installing Arch.
 +
 
 +
It appears that the default partition table (and Windows installation) uses MBR. To use UEFI, you should reformat the disk as GPT (wiping the drive in the process). Follow the instructions for [[UEFI#Create an UEFI System Partition in Linux|creating the  UEFI system partition]]. {{ic|gdisk}} recommends a size of 300M. Follow the [[Beginner's Guide]] to see how to correctly generate (and then fix) the fstab entry for the UEFI partition.
  
 
== Hardware ==
 
== Hardware ==

Revision as of 04:05, 20 February 2013

Model description

Lenovo ThinkPad X1, Sandy Bridge (Core i5, 2,5 GHz), NWG2MRT This model has SSD 80/HDD 320 pair. Comes without optical drive. Has UEFI BIOS with BIOS-legacy fallback mode. Has Windows 7 Pro pre-installed, with tons of bloatware (bing toolbar, big Lenovo superbar button et all) pre-installed, too.

Drive space customization

By default:

- SSD: two WinRE partitions and one Windows system partition
- HDD: blank

I've chosen to:

- leave WinRE untouched (there are two such partitions)
- use SSD for my root partition
- use HDD for swap, /home, /var (~30 Gb, pacman cache goes here), /tmp

Installation method

Note: If you'd like to create Windows recovery flash drive, do it before Arch installation with the help of autorun located at recovery partition, from your installed Windows system.

Due to the fact that there is no optical drive, you need to install Arch from USB stick.

The lazy way to install is just default installation, works flawlessly. Installed system will boot in legacy-BIOS mode.

UEFI

Note: This procedure reflects a single user's experience, and no attempt was made to experiment with different settings.

Download the official ISO or create your own using something like Archiso. Follow the instructions for creating a UEFI bootable USB from the ISO. Note that the default bootloader works fine so there's no need to install an alternative one like rEFInd. In the BIOS under Startup, set "UEFI/Legacy Boot" to UEFI only and turn off CSM support (this step might not be necessary, try skipping it first if you like).

Upon saving your changes and restarting, the UEFI boot options from the USB stick should come up and you can proceed to installing Arch.

It appears that the default partition table (and Windows installation) uses MBR. To use UEFI, you should reformat the disk as GPT (wiping the drive in the process). Follow the instructions for creating the UEFI system partition. gdisk recommends a size of 300M. Follow the Beginner's Guide to see how to correctly generate (and then fix) the fstab entry for the UEFI partition.

Hardware

Just everything works out of the box. I installed only synaptics and video-intel drivers.

Power management

Just consult Laptop page to read about tp_smapi, pm-utils, uswsusp and acpid.

Suspend works fine, even with status indicator.

Other notes

I will improve this page after several days using this laptop. Today is mine first day of it.