Lenovo ThinkPad X1 Carbon (Gen 5)
- 1 Model description
- 2 Configuration
Lenovo ThinkPad X1 Carbon, Gen 5.
To ensure you have this version, install the package and run:
# dmidecode -t system | grep Version Version: ThinkPad X1 Carbon 5th
|Wireless network configuration#iwlwifi||Yes|
|Native Ethernet with Dongle||Yes|
|microSD card reader||Yes|
- Lenovo uses several different trackpoint types in the 5th generation X1 Carbon. Only the standard ALPS variant has Linux support.
The fingerprint reader included with this model `138a:0097 Validity Sensors, Inc` currently lacks a linux driver. libfprint bugreport. Synaptics (which has acquired 'Validity Sensors') has unofficially said that they cannot disclose the protocol, but may possibly release a binary driver.
Open source Linux driver is being developed by reverse engineering the Windows driver. 
Bug: Fans blowing at max speed after resuming
There is a bug in the current kernel, causing the fans to often go on full throttle non-stop after resuming from suspend-to-ram.
This bug is fixed since the kernel 4.12.4-1.
Set of patches available for older version: https://bugzilla.kernel.org/show_bug.cgi?id=196129#c26
If you have an older version of the kernel, you need to manually patch the kernel or work around the issue by repeatedly suspend (Fn+4) and resume (Fn) until it resumes without the fans starting with a short burst of activity. For me, the issue arises in about 2/3 resumes without the patches and never with kernel 4.12.0-2 with patches.
Bug: Trackpoint/Trackpad not working
Several different trackpoints are used with the X1 Carbon Gen 5. There are at least three different trackpoints in use. You can identify them in dmesg as either LEN0071, LEN0072 or LEN0073.
There is a bug in Synaptics drivers that prevent both Trackpoint and Trackpad to function properly if Trackpoint is enabled at boot. This issue affects the Elantech trackpoint as well as one of the ALPS variants.
If you have the Elantech trackpoint, identified as LEN0073 you will see the following in your dmesg log.
kernel: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 kernel: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 kernel: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 kernel: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 kernel: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 kernel: psmouse serio1: issuing reconnect request
Since kernel v4.14 you can workaround this by adding
psmouse.synaptics_intertouch=1 to your kernel parameters.
If you uses a kernel older than 4.14, you can patch it using https://gist.github.com/ursm/6d1007f44a1d6beeb670b3c3a6a78ea4. Note that this only works on the Elantech trackpoint (LEN0073).
Bug: System occasionally hanging during startup
Using the SDDM login manager, the system hangs on every second or third boot on startup before X starts. This is caused by a bug in version 0.16.0 of SDDM, reported here:
It can be solved by letting SDDM wait a little bit before starting. Just create the file /etc/systemd/system/sddm.service.d/override.conf with this content:
[Service] ExecStartPre=/bin/sleep 2
this bug is fixed as of sddm-0.16.0-3
Keyboard Fn Shortcuts
- Fn+4 sends XF86Sleep (puts computer to sleep by default)
- Fn+S sends Alt_L+Sys_Req
- Fn+P sends Pause
- Fn+B sends Control_L+Break
- Fn+K sends Scroll_Lock
- Fn+Space toggles the keyboard backlight
- Fn by itself sends XF86WakeUp (wakes computer from sleep by default)
Some special buttons are not supported by X server due to keycode number limit.
You can remap unsupported keys using udev hwdb:
evdev:name:ThinkPad Extra Buttons:dmi:bvn*:bvr*:bd*:svnLENOVO*:pn* KEYBOARD_KEY_45=prog1 KEYBOARD_KEY_49=prog2
Update hwdb after editing the rule.
# udevadm hwdb --update # udevadm trigger --sysname-match="event*"
There are two options for displays:
- 14" FHD IPS (1920 x 1080): Works
- 14" WQHD (2560 x 1440): Works
I had issues with the thinkpad_acpi module in linux-4.12 and linux-4.13. When loaded no acpi events are generated for Fn+F5 and Fn+F6 keypress by default, because
kernel: thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver kernel: thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... kernel: thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
Setting the acpi_brightness=vendor kernel parameter helped but gave issues with brightness save/restore. In linux-4.14 this issue is resolved.
TrackPoint Scrolling is working out of the box in GNOME and MATE. In some WindowManagers, the TrackPoint middle-button scrolling can be enabled by installing the package from the official repositories and appending the following line to your .xinitrc:
xinput set-prop "TPPS/2 IBM TrackPoint" "libinput Scroll Method Enabled" 0 0 1
Lenovo ThinkPad Thunderbolt 3 Dockingstation
The USB-C Dock is a Thunderbolt 3 device. Plugging it in results in a whole lot of PCI entries:
06:00.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 07:00.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 07:01.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 07:02.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 07:04.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 3c:00.0 USB controller: Intel Corporation Device 15d4 (rev 02)
The dock works nearly perfect out of the box with Kernel 4.10.13. Even hot plugging works: unplugging the dock while a display is connected just lets all the devices disappear. Replugging it later works, all the USB devices come back up automagically, thought you might need to issue a xrandr to get the display showing again (tested with Xorg based i3 setup).
The r8152 based USB Ethernet Port does not work out of the box. It gives the message:
[ 7.574773] r8152 4-1.1:1.0 (unnamed net_device) (uninitialized): Unknown version 0x6010
InstallingAUR fixes this (the DKMS module adds the version 0x6010 to the module).
In order for the internal USB hub in the dock to work without having to boot with the dock connected to your computer, you need to set "Security Level" to "No Security" under Thuderbolt settings in BIOS. Also remember to enable the "Support in pre boot environment" for USB peripherals connected to the dock to work at all.
HP Thunderbolt 3 Dock
The HP Thunderbolt 3 Dock is working out of the box.
Lenovo p27h-10 (USB Type C)
Charging while using the monitor via USB-Type-C is working but the dock functionality needs investigation (e.g. speakers, mouse, directly from the monitor).