Difference between revisions of "Lenovo ThinkPad X1 Carbon (Gen 6)"

From ArchWiki
Jump to navigation Jump to search
m (dmidecode needs sudo)
(Add reference to the X1 Yoga)
Line 7: Line 7:
{{Related|Lenovo ThinkPad X1 Carbon (Gen 4)}}
{{Related|Lenovo ThinkPad X1 Carbon (Gen 4)}}
{{Related|Lenovo ThinkPad X1 Carbon (Gen 5)}}
{{Related|Lenovo ThinkPad X1 Carbon (Gen 5)}}
{{Related|Lenovo ThinkPad X1 Yoga (Gen 3)}}
{{Related articles end}}
{{Related articles end}}

Revision as of 07:40, 23 November 2018

The Lenovo ThinkPad X1 Carbon, 6th generation is an ultrabook introduced in early 2018. It comes in several variants(20KH* and 20KG*) and features a 14" screen, 8th-gen Intel Core processors and integrated Intel UHD 620 graphics.

To ensure you have this version, install the package dmidecode and run:

# sudo dmidecode -t system | grep Version

Version: ThinkPad X1 Carbon 6th
Device Working Modules
Intel graphics Yes i915, (intel_agp)
Wireless network Yes iwlmvm
Native Ethernet with included dongle Yes ?
Mobile broadband No¹ ?
Audio Yes snd_hda_intel
Touchpad Yes psmouse, rmi_smbus, i2c_i801
TrackPoint Yes psmouse, rmi_smbus, i2c_i801
Camera Yes uvcvideo
Fingerprint Reader No² ?
Power management Yes³ ?
Bluetooth Yes btusb
microSD card reader Yes scsi_mod
Keyboard Backlight Yes thinkpad_acpi
Function/Multimedia Keys Yes ?
Thunderbolt 3 eGPU Yes⁴ nvidia
  1. No working Linux driver for Fibocom L850-GL. See this thread and this thread for more info.
  2. The Validity90 project began reverse engineering the reader, but updates have stopped recently.
  3. S3 suspend requires changes to BIOS settings - see section on suspend issues.
  4. Internal monitor acceleration does not appear to be supported.


The most convenient way to install Arch Linux is by disabling "Secure Boot" Security -> Secure Boot - Set to "Disabled". However it is possible to self-sign your kernel and boot with it enabled. For further information have a look at the Secure Boot article.

In case your efivars are not properly set it is most likely due to you not being booted into UEFI. Should the problem persist be sure to consult the UEFI#UEFI variables section.


Automatic (Linux Vendor Firmware Service)

In August of 2018 Lenovo has joined the Linux Vendor Firmware Service(LVFS) project, which enables firmware updates from within the OS. BIOS updates (and possibly other firmware such as the Thunderbolt controller) can be queried for and installed through fwupd.


BIOS update 1.31 was released on 2018-10-02. Obtain geteltoritoAUR and run geteltorito.pl -o bios-update.img n23ur12w.iso on the downloaded ISO file to create a valid El Torito image file, then flash this file on a USB drive via dd like you would flash Arch installation media. For further information see flashing BIOS from Linux.

The ThinkPad X1 Carbon supports setting a custom splash image at the earliest boot stage (instead of the red "Lenovo" logo), more information can be found in the README.TXT located in the FLASH folder of the update image.

Suspend issues

Since BIOS version 1.30, the X1 Carbon supports S3 mode when enabled in the BIOS menu (choose "Linux" sleep mode instead of the default "Windows 10"). See #Automatic (Linux Vendor Firmware Service) for instructions to update and verify your BIOS version.

Enabling S3

To enable S3 support, make sure you have at least BIOS version 1.30 installed. Then, go into the BIOS configuration, and Config -> Power -> Sleep State - Set to "Linux". This should make S3 available. To verify, after making the changes in the BIOS configuration, boot into Linux, and run the dmesg command again to make sure that S3 is now available.

Verifying S3

To check whether S3 is recognized and usable by Linux, run:

dmesg | grep -i "acpi: (supports"

and check for S3 in the list.

Disabling the memory card reader

You might also need to disable the Realtek memory card reader (which appears to use a constant 2-3 W) either via the BIOS or via

echo "2-3" | sudo tee /sys/bus/usb/drivers/usb/unbind

BIOS configurations

  • Config -> Thunderbolt BIOS Assist Mode - Set to "Enabled". When disabled, on Linux, power usage appears to be significantly higher because of a substantial number of CPU wakeups during s2idle.

Power management/Throttling issues

Due to wrong configured power management registers the CPU may consume a lot less power than under windows and the thermal throttling occurs at 80°C (97°C when using Windows, see T480s throttling bug).

There is a post in the official Lenovo forum to inform Lenovo about this issue.

Throttling fix

An easy package has been written to address the problem until (or if) Lenovo ever solves it.

Install lenovo-throttling-fix-gitAUR, then run:

sudo systemctl enable --now lenovo_fix.service

The script also supports more advance thermal/performance features including CPU undervolting. See the lenovo-throttling-fix repository README.md for details.

Note: If you installed thermald, it may conflict with the throttling fix in this package. Consider disabling thermald or otherwise work around this.


Keyboard Fn Shortcuts

  • Fn+4 sends XF86Sleep (puts computer to sleep by default)
  • Fn+S sends Alt_L+Sys_Req
  • Fn+P sends Pause
  • Fn+B sends Control_L+Break
  • Fn+K sends Scroll_Lock
  • Fn+Space toggles the keyboard backlight
  • Fn by itself sends XF86WakeUp (wakes computer from sleep by default)

Special buttons

Some special buttons are not supported by X server due to keycode number limit.

Key combination Scancode Keycode Note
Fn+F11 0x49 374 KEY_KEYBOARD Not recognized in Wayland
Fn+F12 0x45 364 KEY_FAVORITES Recognized correctly on Wayland

You can remap unsupported keys so that they can be detected and mapped in X using udev hwdb:

Note that prog1 and prog2 map to KEY_PROG1 and KEY_PROG2 in /usr/include/linux/input-event-codes.h. You can use any key code with a defined value less than 255. The keycode hwdb expects is the lowercased text following KEY_ in the above input event codes header file. eg: KEY_COFFEE would be coffee.

evdev:name:ThinkPad Extra Buttons:dmi:bvn*:bvr*:bd*:svnLENOVO*:pn*

To make the changes take effect:

# udevadm hwdb --update
# udevadm trigger --sysname-match="event*"

Bind special keys

It should be noted that Fn+F11 which is KEY_KEYBOARD and Fn+F12 which is KEY_FAVORITES could be bound respectively with XF86Launch1 and XF86Launch2, as followed :

# bindsym XF86Launch1 [your app]
# bindsym XF86Launch2 [your app]

HDR Display Color Calibration

For models with the 1440p HDR display, the default color profile can be corrected under Gnome using an ICC calibration provided by notebookcheck.net's review.

 wget https://www.notebookcheck.net/uploads/tx_nbc2/B140QAN02_0.icm
 colormgr import-profile B140QAN02_0.icm

This will import the ICC profile, and next you'll need to activate it for your display. Find your display's object path:

 colormgr get-devices | sed -rn 's/Object Path:\s*(.*eDP1.*)/\1/p'

And your new color profile object path:

 colormgr get-profiles | grep -4 -i B140QAN02

And finally activate the profile and set it as the default for this display:

 colormgr device-add-profile <device object id> <profile object id>
 colormgr device-make-profile-default <device object id> <profile object id>

You can verify the profile is active by running colormgr get-devices.

Intel Graphics UHD 620 issues

Enable GuC/HuC firmware loading suggests to load GPU firmware with warning. However, on Wayland for Carbon X1 gen 6 it cause GPU hang problem. Issues can be reflected as: a) crashing GPU process of Chrome / Chromium / Electron apps and subsequent host freezing; b) crashing of Gnome / Wayland with possibility to reboot via second virtual terminal; c) just host freezing. In dmesg the following can be observed:

 kernel: [drm] GPU HANG: ecode 9:0:0x85dffffd, in chrome [18418], reason: hang on rcs0, action: reset
 kernel: [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
 kernel: [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
 kernel: [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
 kernel: [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
 kernel: [drm] GPU crash dump saved to /sys/class/drm/card0/error
 kernel: i915 0000:00:02.0: Resetting rcs0 for hang on rcs0

Note that, first line changes depending on the source of crashing application, but the result is the same, so issue is with GPU / firmware. Basically don't enable GuC / HuC firmware loading, at least if on Wayland. There are a number of similar issues reported including #108717.

TrackPoint and Touchpad issues

Note: Some models of the 6th generation X1 Carbon seem to have issues with the TrackPoint and Touchpad working at the same time.
Note: The following parameter will only work for kernel versions after v4.14. Fore more information, see Lenovo ThinkPad X1 Carbon (Gen 5)#Bug: Trackpoint/Trackpad not working.

To get the TrackPoint and Touchpad to work at the same time, add synaptics_intertouch=1 to the psmouse kernel module options, for example in the cmdline of the boot loader:

 [...] root=/dev/sda1 rw psmouse.synaptics_intertouch=1 [...]

or by editing /etc/modprobe.d/psmouse.conf:

 options psmouse synaptics_intertouch=1
Note: When using TLP with default powersaving settings, there might be occasional hiccups such as dropouts of tap-to-click functionality for the Touchpad, as well as the TrackPoint not surviving suspends and needing to be re-initialized.

Reconnecting a dead trackpad can be done via

echo -n "none" | sudo tee /sys/bus/serio/devices/serio1/drvctl
echo -n "reconnect" | sudo tee /sys/bus/serio/devices/serio1/drvctl

A bug in the libinput library that caused dropouts of the tap-to-click functionality of the touchpad on the X1 Carbon 6th Gen has been fixed in libinput 1.11.2, which was released on 3 July 2018.

Full-disk encryption

Ramdisk module

With LUKS for root, i915 needs to be loaded in ramdisk in order to access the password prompt. Add i915 to MODULES list in /etc/mkinitcpio.conf and regenerate the ramdisk.



s-tui (s-tuiAUR): an aesthetically pleasing and useful curses-style interface that shows graphs of CPU frequency, utilization, temperature, and power consumption. It also has a built in stress tester.

intel_gpu_top (intel-gpu-tools): gives you some top-like info for the integrated GPU. This can be quite useful in diagnosing GPU acceleration issues.

powertop (powertop): provides detailed information about CPU power consumption and recommendations on how to improve it.

tlp-stat (tlp): a much simpler alternative to remembering which cat /sys/devices/system/* to run in many cases. It can give very detailed, structured information about components like the battery, processor, graphics card, etc.


Additional resources