Lenovo ThinkPad X1 Extreme

From ArchWiki
Revision as of 19:47, 18 March 2019 by K900 (talk | contribs) (→‎CPU throttling workaround: Removed settings that are not known to be safe (for now))
Jump to navigation Jump to search
Device Status Modules
Intel UHD 630 Graphics Working i965
Nvidia GTX 1050 Ti (Max-Q) Working nvidia
Intel I219-V Ethernet Working e1000e
Intel 9560 wireless Working iwlwifi
Realtek ALC285 audio Working snd_hda_intel
Synaptics touchpad Working synaptics + libinput
SunplusIT camera Working uvcvideo
Card reader Working xhci_hcd
Intel 9560 Bluetooth Working btusb
Intel JHL7540 Thunderbolt Working thunderbolt
Synaptics fingerprint reader Not working

The ThinkPad X1 Extreme is a thin-and-light 15.6" workstation/multimedia laptop from Lenovo's 2018 ThinkPad X lineup.

This page specifically concerns the specifics of running Arch Linux on this laptop. See Laptop for generic laptop-related information, or ThinkPad for other ThinkPad laptops.

Note: The ThinkPad P1 is a workstation version of the same laptop which uses extremely similar hardware. Most of the information on this page should be applicable to P1 models as well.

Hardware compatibility

BIOS update

Despite not being strictly required for an Arch Linux install, a BIOS update is strongly recommended for general use of the laptop - the initial 1.13 version devices seem to ship with contains multiple bugs that can result in bricking the laptop: Reddit thread discussing the issue; another Reddit thread discussing a different bricking issue.

BIOS updates are available via fwupd, the Lenovo Vantage application on Windows, or from Lenovo's website.

The latest version, v1.19, is highly recommended, and can be installed by running fwupdmgr install https://download.lenovo.com/pccbbs/mobiles/n2eet37w.cab as root. This will download the firmware directly from Lenovo. The firmware updates are digitally signed, so there is no additional risk caused by the direct download.

The latest version available on the LVFS as of early March 2019 is v1.17 (listed as 0.1.17). While that version resolves all known critical (read: hard bricking) issues, it still contains multiple bugs, particularly related to power management and early boot, that are fixed in the later versions, so v1.19 should be preferred when possible.

All information on this page generally assumes the latest BIOS unless explicitly stated.

Hybrid graphics

Hybrid mode works via Bumblebee or nvidia-xrun. The HDMI port is wired to the Nvidia chip, see Bumblebee#Output wired to the NVIDIA chip for details.

Nvidia-only mode works fine with the default configuration produced by nvidia-xconfig, including HDMI output.


Thunderbolt works out of the box (tested with ThinkPad Thunderbolt 3 Dock); see Thunderbolt for details on security. DisplayPort/HDMI port seems to be attached to the NVIDIA GPU only.

Other hardware

The webcam works out of the box, though it appears connected at all times, no matter the slider state (the camera reports a "disconnected" placeholder image in Windows when the protective slider is closed) - however, when the slider is closed, a completely black image is reported by the camera.

The fingerprint scanner is currently not supported in libfprint - a reverse engineering effort was ongoing here, but seems to have stalled. Upstream libfprint bug is tracked here.

Everything else works correctly out of the box.

Software tweaks

Dolby Atmos Effect on Linux

In order to get the same speaker sound quality/effect as on Dolby Atmos with Windows install & configure PulseAudio and pulseeffects. You can then download the Dolby Atmos preset from JackHack96's Github and enable it in the "Convolver" tab of the PulseEffects GUI.

Battery charge thresholds

Battery charging thresholds can be configured via sysfs nodes /sys/class/power_supply/BAT0/charge_start_threshold and /sys/class/power_supply/BAT0/charge_stop_threshold, or using TLP.

CPU throttling workaround

Warning: The safety of the settings mentioned in this section is still being investigated. The firmware limits the temperature to 80C maximum, even with the correct DPTF policy applied. This may or may not be a bug. Please don't use these settings unless you're confident you know what you're doing or the behavior is validated more.

A stress test using s-tuiAUR indicates that CPU power limit is capped at 38W, keeping CPU temperature at 81C and resulting in maximum sustained frequency around 2850 MHz on i7-8750H. Similar to other modern Thinkpad laptops, this can be worked around by using throttledAUR (previously known as lenovo-throttling-fix-gitAUR) or intel-undervolt (see below). It raises the power limit to 44W, which, combined with the performance CPU frequency scaling governor, allows the same CPU to run at 3100 MHz with the temperature of 95C.

See the throttled homepage for more info about the temporary fix; a proper solution is incoming, and likely to appear in Linux 5.1.

CPU undervolting

Undervolting the CPU/Intel GPU works well with intel-undervolt. Generally -150mV seems to be a safe choice on the i7-8750H and i7-8850H CPUs, but your mileage may vary.

Kernel parameters

As of January 2019, the following commonly used kernel parameters are known to work:

  • i915.enable_psr=1 - enables panel self-refresh on Intel graphics, likely power savings; will be enabled by default starting with Linux 5.1
  • i915.fastboot=1 - skips mode setting on startup, prevents flickering on compatible boot loaders (rEFInd, GRUB2 with resolution set, etc.); will be enabled by default starting with Linux 5.1
  • i915.enable_guc=2 - enables GuC/HuC firmware loading, allowing additional hardware acceleration for some video encoding configurations


All information on this page has been tested on laptop part number 20MF000BUS and 20MFCTO1WW, with the following specifications:

  • CPU: Intel Core i7-8750H / i7-8850H
  • Graphics: Hybrid Intel UHD 630 + Nvidia GTX 1050 Ti Max-Q
  • Display: Innolux N156HCE-EN1 1920x1080/60Hz IPS (other vendors may be used)
  • RAM: 16GB / 32GB
  • SSD: Intel 7600p series 512GB NVMe / Samsung 970 Pro 1TB NVMe