Lenovo ThinkPad X200

The Lenovo ThinkPad X200 is a wonderful high-quality laptop featuring a 12.1" widescreen WXGA monitor, an Intel Core 2 Duo processor (2.26 - 2.66GHz), an Intel Graphics Media Accelerator 4500MHD and up to 4GB of RAM whilst still maintaining impressive battery life.

While Arch Linux is running flawlessly on this laptop there are a few things you have to configure manually. This article will aid you in configuring your system and will provide additionally hints to make your ThinkPad X200 experience even better.

Setup

Wireless

The ThinkPad X200 has a Intel PRO/Wireless 5100 AGN wireless adapter included. In order to make it work you have to install the iwlwifi-5000-ucode package when you install from a 2010.05 snapshot in order to get the firmware, by now the package is included in the linux-firmware package.

Now you can choose whatever network configuration programs you want to use. If you do not already know which network manager you want to use, we highly recommend netctl.

If you experience connectivity problems such as a slow connection or aborts, especially when connected to an (Enterprise) WPA2 network, then try to load the iwlwifi module with the options 11n_disable=1, 11n_disable=2, swcrypto=1, bt_coex_active=0. There is no clear recommendation which of these options to be used as for some users 11n_disable=1 already solves the problem sufficiently, for others bt_coex_active=0. Thus, play around with each of them. Example:

modprobe iwlwifi 11n_disable=2

If some of them work out for you, then make the options permanent by creating the file /etc/modprobe.d/wireless.conf and adding the following:

options iwlwifi 11n_disable=2
# Disable blinking LED wireless light 
options iwlwifi led_mode=1

Graphics

The graphics card is supported by the xf86-video-intel driver package from the extra repository. The Xorg server makes use of this automatically. There's no need for a Xorg configuration file.

# pacman -S xf86-video-intel

Audio

Audio is supported out of the box after installing the necessary alsa packages from the core repository.

# sudo pacman -S alsa-lib

See Alsa for more information.

Fingerprint Reader

See fprint.

Configuration

GRUB kernel parameter

Many kernel parameters usually recommended in the past to increase performance and battery conservation are obsolete or already implemented in the kernel by default. As such the actual kernel line in /etc/default/grub can look very minimal:

GRUB_CMDLINE_LINUX_DEFAULT="acpi_osi=Linux zswap.enabled=1 zswap.compressor=lz4 resume=/dev/mapper/VolGroup00-Swap"

acpi_osi=Linux is required to make the mute button working and zswap.enabled=1 as well as zswap.compressor=lz4 will increase the speed on resume from hibernation.

Disable bluetooth at boot

In order to disable bluetooth at boot you just need to add the following line to a newly created /etc/tmpfiles.d/disable-bluetooth.conf file. Please note, that there is no longer support for a /etc/rc.local file.

w /proc/acpi/ibm/bluetooth - - - - disable

Enable tap to select

You can enable the double click through tapping on your track point. Create a /etc/tmpfiles.d/enable-tap-to-select.conf with the following content:

w /sys/devices/platform/i8042/serio1/press_to_select - - - - 1

Hard Disk Shock Protection

The ThinkPad X200 comes with an integrated 2-axis accelerometer providing the possibility of parking the hard drive's disk heads preventing from data loss due to heavy shocks.

First you'll have to install tp_smapi and hdapsd from official repositories (Community). Then you have to load the hdaps module provided by tp_smapi with the option invert=7 passed. This will correct the orientation of the accelerometer's axises. If you are using systemd, create a file /etc/modules-load.d/tp_smapi.conf with the following line:

# Load tp_smapi at boot
options tp_smapi invert=7

Then you need to start the hdapsd daemon:

# systemctl enable hdapsd
# systemctl start hdapsd

Now check your log files with journalctl if you see any parking/unparking entries which indicate that hdapsd is successfully configured.

For full information see: HDAPS

Note: If you experience parking / un-parking events when not moving your hard disk, then you might use the wrong invert value. Install and run hdaps-gl and check whether it shows your machine in the correct orientation when turning the machine. If not, you need to change the invert value. Alternatively to reloading the module you can also directly write a value between 0 and 7 to /sys/devices/platform/hdaps/invert.

Mute button

If the mute button on your keyboard is not working, then be sure to add acpi_osi="Linux" to your boot parameter in /etc/default/grub.

GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi_osi=Linux"

Screen calibration

If you experience your stylus to be working very imprecisely, then you might need to calibrate it first. Install xinput_calibrator^AUR and run the following command:

sudo xinput_calibrator --device "Serial Wacom Tablet WACf004 stylus"

After calibration you need to create the file called /etc/X11/xorg.conf.d/99-calibration.conf with the settings provided by xinput_calibrator.

Loading the correct ICC colour profile

Download TPLCD.ICM and move it to ~/.color/icc. Load the profile with xcalib^AUR as follows:

$ /usr/bin/xcalib -d :0 ~/.color/icc/TPLCD.ICM

Screen rotation

The screen rotation hardware button does not work by default. First you have to assign this button to a free keycode. In order to find out an unused keycode, you can use the command xmodmap -pke | less.

# File: /etc/systemd/system/setkeycodes.service 

[Unit]
Description=Assign each hardware button to a free keycode on boot

[Service]
Type=oneshot
ExecStart=/usr/bin/setkeycodes 0x67 184 0x6c 185 0x68 186 0x66 187

[Install]
WantedBy=multi-user.target

Note: Commands like xmodmap, xev, showkey, dmesg, setkeycodes can help you.
Here is a very good tutorial for adding extra keys : Extra Keyboard Keys

Then you can assign the script for screen rotation to that button.

# File: /usr/local/bin/screen_rotation.sh

#!/bin/sh

# Find the line in "xrandr -q --verbose" output that contains current screen orientation and "strip" out current orientation.

rotation="$(xrandr -q --verbose | grep 'connected' | egrep -o  '\) (normal|left|inverted|right) \(' | egrep -o '(normal|left|inverted|right)')"

# Using current screen orientation proceed to rotate screen and input tools.

case "$rotation" in
    normal)
    # rotate to the left
    xrandr -o left
    xsetwacom set "Serial Wacom Tablet WACf004 stylus" rotate ccw
    xsetwacom set "Serial Wacom Tablet WACf004 eraser" rotate ccw
    ;;
    left)
    # rotate to normal
    xrandr -o normal
    xsetwacom set "Serial Wacom Tablet WACf004 stylus" rotate none
    xsetwacom set "Serial Wacom Tablet WACf004 eraser" rotate none
    ;;
esac

The assignment of the keycode to the script depends on your desktop environment. For Gnome the assignment can be easily done in the Keyboard preferences of custom shortcuts. If you are using another desktop environment (such as XFCE, LXDE, Fluxbox ...) you can always use the program xbindkeys.

Screen auto-rotation

The auto-rotation of the screen does not work by default. First you have to install the HDAPS package so as to get the values worked out by the integrated 2-axis accelerometer of the Thinkpad X200. Then the following script will enable you to use the accelerometer's data to automatically rotate your screen :

#!/bin/bash

# (To have the exact names of these devices you should type the command : xsetwacom --list devices )
stylus="Serial Wacom Tablet stylus" 
eraser="Serial Wacom Tablet eraser"

function rotate {
    if [ $# -lt 1 ]; then  # error ...
	exit 1 
    fi

    case "$1" in
        up)
            nextRotate="none"
            nextOrient="normal" ;;
        down)
            nextRotate="half"
            nextOrient="inverted" ;;
	right)
            nextRotate="ccw"
            nextOrient="left" ;;
	left)
            nextRotate="cw"
            nextOrient="right";;
    esac

    # Rotate the screen      
    xrandr -o $nextOrient

    # Rotate the tablet                      
    xsetwacom set "$stylus" Rotate $nextRotate
    xsetwacom set "$eraser" Rotate $nextRotate
}

while true; do
    # 1) We extract data about the actual position
    position=$(cat /sys/devices/platform/hdaps/position)
    x=$(echo $position | sed -n "s/(\([-0-9]*\),\([-0-9]*\).*)/\1/p") # most of time contained in [350,650]
    y=$(echo $position | sed -n "s/(\([-0-9]*\),\([-0-9]*\).*)/\2/p") # most of time contained in [-650,-350]

    # 2) We work out the x value (= left and right inclination) (always between 
    if [ $x -lt 400 ]; then
	rotate left
    elif [ $x -gt 600 ]; then
	rotate right
    fi
    
    # 3) We work out the y value (= front and back inclination)
    if [ $y -gt -400 ]; then
	rotate down
    elif [ $y -lt -600 ]; then
	rotate up
    fi

    # 4) wait before checking the value again
    sleep 0.5
done

Then you can run this script at the startup in order to make your screen automatically rotate when you need it. For instance, you can use the file ~/.fluxbox/startup on fluxbox, or the command : gnome-session-properties if you are using Gnome 3).

Power consumption and fan control

Note: There is a useful blog post describing possible measures to reduce power consumption of a X200T to almost 7 Watt.

You might notice a beeping whilst your system is running. This is due to missing fan control. Install the tlp package from AUR to enable extensive fan and power consumption control.

You can further disable the nmi-watchdog by creating the file /etc/tmpfiles.d/disable-nmi-watchdog.conf with the following line:

w /proc/sys/kernel/nmi_watchdog - - - - 0

This will disable the watchdog at startup.

Additionally you might want to define different brightness level and automatically dim your screen when you are running on battery. A DE and WM independent solution is the usage of pm-utils. Detailed instructions can be found here. They are tested to work with a X200T.

Suspend to RAM

Suspend to RAM is working out of the box with the standard Arch Linux kernel after installing pm-utils from extra.

# pacman -S pm-utils

Issue the command

# pm-suspend

as root to suspend to RAM. The laptop will wake up on any key press or on opening the lid.

Note: Very seldom after resuming the backlight won't come back on. The following page on ThinkWiki might provide information on how to solve this issue: Problem with display remaining black after resume.

Unsupported

Unlike those on older models, the fingerprint reader on the X200 ("Authentec 2810") is unsupported on linux as there are no working drivers either in the kernel or outside[1].

Troubleshooting

failed to execute '/usr/sbin/inputattach'

If you see the above error in your logs, copy /usr/lib/udev/rules.d/70-wacom.rules to /etc/udev/rules.d/70-wacom.rules and comment out SUBSYSTEM of inputattach.

System feels unresponsive

If your system feels unresponsive and lagging, you can try creating a file called /etc/modprobe.d/drm_kms.conf:

options drm_kms_helper poll=N

PM device: Resume from hibernation error: Failed to restore -19

This is likely to be related to the tpm_tis and tpm modules not being properly unloaded before hibernation. These modules are required by the device listed in the error as 00:0a:

# dmesg | grep 00:0a
[    0.377877] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[   10.746742] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[   10.746751] tpm_tis 00:0a: Intel iTPM workaround enabled
[   10.866734] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)

To unload the module create the following executable file called /usr/lib/systemd/system-sleep/tpm.sh, assuming the use of the systemd hibernation procedure:

#!/bin/sh
case $1/$2 in
  pre/*)
    echo "Going to $2..."
    modprobe -r tpm
    modprobe -r tpm_tis
    ;;
  post/*)
    echo "Waking up from $2..."
    modprobe tpm
    modprobe tpm_tis
    ;;
esac

mei_me 0000:00:03.0: suspend

If you are seeing this error, a workaround is to blacklist the mei and mei_me modules. More information can be found here.

pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00

See #mei_me 0000:00:03.0: suspend.

Uhhuh. NMI received for unknown reason 30.

The Thinkpad X200 is known to report the following error on resume from hibernation or suspension:

Uhhuh. NMI received for unknown reason 30.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?

In this case you can disable the high precision event timer (HPET) by adding "nohpet" to your GRUB kernel parameter line.

See also

• Thinkwiki: X200 Overview
• ThinkWiki: How to reduce power consumption