Difference between revisions of "Logitech MX1000"

From ArchWiki
Jump to: navigation, search
(Get, Install evdev)
(Quick Overview)
Line 4: Line 4:
 
= Quick Overview =  
 
= Quick Overview =  
  
What we will do in this Wiki page to get your MX1000 mouse working as desired (defined as left click, right click, center click, forward and backward scroll wheel, left and right horizontal scrolling all working, and the thumb buttons doing Forward and Back in your browser) is:
+
What we will do in this Wiki page to get your MX1000 mouse working as desired:
 +
 
 +
* Left click, Right click, Center click all working
 +
* Forward and Backward scroll wheel, Left and Right horizontal scrolling all working
 +
* Thumb buttons doing Forward and Back in your browser
 +
 
 +
is the following:
  
 
* Get and install evdev
 
* Get and install evdev
Line 19: Line 25:
 
  "/usr/bin/xvkbd -xsendevent -text "\[Right]""
 
  "/usr/bin/xvkbd -xsendevent -text "\[Right]""
 
  m:0x0 + b:14
 
  m:0x0 + b:14
 +
 +
This will setup your MX1000 so that it works as desired.
  
 
That's the overview. Now onto the details of each step.
 
That's the overview. Now onto the details of each step.

Revision as of 18:05, 28 August 2007

Disclaimer: this information is current as of Arch Linux 2007.08 (Don't Panic). For later releases, your mileage may vary. In the true spirit of a Wiki, if you determine that this content needs to be updated for a later release, please go ahead and do so!


Quick Overview

What we will do in this Wiki page to get your MX1000 mouse working as desired:

  • Left click, Right click, Center click all working
  • Forward and Backward scroll wheel, Left and Right horizontal scrolling all working
  • Thumb buttons doing Forward and Back in your browser

is the following:

  • Get and install evdev
  • Modify xorg.conf to use evdev as your mouse driver
  • Get and install xvkdb and xbindkeys
  • Create a ~/.xbindkeysrc containing the following:
"/usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[Left]""
m:0x0 + b:8
"/usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[Right]""
m:0x0 + b:9
"/usr/bin/xvkbd -xsendevent -text "\[Left]""
m:0x0 + b:13 
"/usr/bin/xvkbd -xsendevent -text "\[Right]""
m:0x0 + b:14

This will setup your MX1000 so that it works as desired.

That's the overview. Now onto the details of each step.

Get, Install evdev

First, use evdev as the Xorg mouse driver. evdev is a newer driver that allows you to effectively use mice with more than 7 buttons. Get this module, install it, and make sure it is loaded each time you run Linux.

For Arch, this means:

# pacman --sync xf86-input-evdev

and adding "evdev" to the modules list in /etc/rc.conf.

Modify xorg.conf to Use evdev as Your Mouse Driver

Next, in /etc/X11/xorg.conf, create an evdev-based input device that specifies your mouse:

# evdev based section for Logitech MX1000 mouse

Section "InputDevice"
   Identifier  "Evdev Mouse"
   Driver      "evdev"
   Option      "Name" "Logitech USB Receiver"
   Option      "CorePointer"
EndSection


Note that none of the usual "Buttons" and "ZAxisMapping" statements are not needed with evdev. Note as well that the "Name" field above is critically important. This is the linkage between evdev and xorg. Find out the name for your device via:

# egrep "Name|Handlers" /proc/bus/input/device

In the case of the Logitech MX1000 mouse, which is wireless, it is: "Logitech USB Receiver". Make sure you add the "Name" option to your InputDevice section for the mouse.


Modify Xorg ServerLayout to Use Your evdev Mouse

Now modify the Xorg server layout to use this mouse entry:

Section "ServerLayout"
   Identifier     "Xorg Configured"
   Screen         0  "Screen0" 0 0
   InputDevice    "Keyboard0" "CoreKeyboard"
   InputDevice    "Evdev Mouse" "CorePointer"
EndSection


Map The Mouse Buttons to the Desired Functions

To get all of the buttons working and doing what you want them to, you need to use xev to map out the buttons: what buttons are recognized via evdev and what function each of the recognized buttons performs. Your job then is to move functions around between buttons, via xmodmap, if some functions are showing up on buttons you don't want them on (and presumably not showing on the buttons you DO want them on) and then add in any remaining functions via xbindkeys. The net result of this work should be a set of buttons on your MX1000 that do what you want.

To start, we need to map out the mouse in its "raw" state, and understand what buttons are recognized via evdev and what function each of these buttons does in your application(s) of interest, usually file managers and web browsers.

To do this, open an xterm and type:

xev | grep -i button

Move your mouse pointer into the xev window and systematically move through each button on your mouse. Click the button and write down the button number (referred to hereafter as the "logical button number" for that button) that xev reports. When done, you can close xev. Next, go to you application of choice, usually your web browser, and try out each button there, noting down what function it performs.


When you are done with this, you will have a complete map of your mouse in its "raw" state:

  • Which buttons are recognized
  • The xev logical button number for each physical button on the mouse
  • What function each button performs in your application(s) of choice


When I did this for the MX1000 under Arch 2007.08, I got the following:

Mouse Button                 xev Button Number    Current Fn      Desired Fn
----------------------------------------------------------------------------
Left Click 1 Left Click Left Click
Scroll Wheel Center Click 2 Center Click Center Click
Right Click 3 Right Click Right Click
Scroll Fwd Roll 4 Scroll Fwd Scroll Fwd
Scroll Back Roll 5 Scroll Back Scroll Back
Back Thumb Button 8 None Browser Back
Forward Thumb Button 9 None Browser Fwd
Center Thumb Button 10 None None
Scroll Fwd Button 11 None None
Scroll Back Button 12 None None
Left Horizontal Scroll 13 None Left Scroll
Right Horizontal Scroll 14 None Right Scroll

Note that xev button numbers 6 and 7 are not defined by the above. evdev does not report any of the MX1000 buttons as button numbers 6 or 7.

Looking at the above, we see that we have no desired functions showing up on the wrong buttons, but we do have several desired functions that simply don't show up at all. So, the good news is that we don't need to fiddle with the infamous xmodmap command at all to get our MX1000 doing what we want it to.


A Brief Digression - Moving Functions Amongst Mouse Buttons

A brief digression though, in the interests of completeness. What if we DID have functions showing up on the wrong buttons? How would we re-arrange them? This is where xmodmap comes into play. In general, xmodmap maps logical buttons onto physical buttons. In the below:

xmodmap -e "pointer = 1 2 3 4 5 6 7 8 9 10 11 12 13 14"

xmodmap maps logical buttons 1 - 14 onto identically the same physical buttons. The physical button number is implied, the numbers that you type represent the logical button number that will be reported when the associated physical button is pressed. hence, the above statement is in essence a nil operation. It changes nothing. However, as an example, lets assume that I had the Browser Back and Browser Forward functions showing up on Buttons 6 and 7 and that I wanted them on buttons 8 and 9 (this is NOT the case for the MX1000 - it is just being used as an example). In this case, the following statement would achieve the desired remapping:

xmodmap -e "pointer = 1 2 3 4 5 8 9 6 7 10 11 12 13 14"

As you can see, this statement maps logical button 8 into the position of physical button 6, logical button 9 into the position of physical button 7 and so on. Hence, when physical button 6 is pressed, the original function of physical button 8 will be reported by evdev instead. Similarly, when physical button 7 is pressed, the original function of physical button 9 will be reported and so on. Remember that you established the evdev mapping between the real buttons on your MX1000 and the physical button numbers we are discussing here when you mapped the mouse in its "raw" state above.

This ends the digression. In case you ever do need to do this with another mouse, you now know how to use xmodmap to move logical functions around between buttons on your mouse.


We Now Return to Our Regular Programming (pun intended!)

Back to the MX1000. As we discovered from our mapping exercise, there are no functions showing up on the wrong mouse buttons, just several functions that are not showing up at all. We will use xbindkeys to resolve this, by discovering keystrokes that cause the browser to do the desired function, and then mapping those keystrokes onto the mouse buttons of interest.

Unfortunately, the only way to determine the keystrokes that produce the desired result is to experiment until you find them. For Firefox, it turns out that ALT-Left_Arrow causes the browser to perform the Back function, and ALT-Right_Arrow causes it to do the Forward function. So, we wish to map MX1000 physical button 8 (the Back thumb button) to ALT+Left_Arrow and MX1000 physical button 9 (the Forward thumb button) to ALT+Right_Arrow.

To do this mapping, get and install xvkbd and xbindkeys.

For Arch, this means:

# pacman --sync xvkbd
# pacman --sync xbindkeys

Now create file ~/.xbindkeysrc, containing:

# Mouse Buttons
"/usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[Left]""
m:0x0 + b:8 
"/usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[Right]""
m:0x0 + b:9

and add the following to your .xinitrc, or somewhere where it will be executed each time X starts:

% xbindkeys

At this point, the MX1000's Forward and Back buttons should be doing your bidding in at least Firefox. Now what about horizontal scrolling?


Enable Horizontal Scrolling

The MX1000 comes with a tilting scroll wheel. If you tilt it to the left, the intent is that the screen should scroll to the left. Tilt it to the right and the screen should scroll to the right. To get this function working in Firefox, we need to discover the keystrokes that cause Firefox to scroll left and right and then map those onto MX1000 physical buttons 13 and 14 respectively (the scroll wheel's tilt left and right button numbers, as we discovered above when we mapped the mouse in its "raw" state via xev.

So, what are the required keystrokes? Like the above, it turns out that you have to determine which keys they are through trial and error unfortunately. For Firefox, you will eventually discover that a left arrow key scrolls the screen the left and a right arrow key scrolls it to the right. So, our objective is to map MX1000 physical button 13 to Left_Arrow and MX1000 physical button 14 to Right_Arrow.

To do this, simply add the following to the .xbindkeysrc we created above:

"/usr/bin/xvkbd -xsendevent -text "\[Left]""
m:0x0 + b:13
"/usr/bin/xvkbd -xsendevent -text "\[Right]""
m:0x0 + b:14

That is it. Restart X and you will find that left and right scrolling now work just fine!


A Few Buttons Left

There is a button in the middle between the Forward and Back thumb buttons that I believe Logitech calls the Tasks button. There are also two scroll buttons, one in front of and one behind the scroll wheel itself. I have never found a need for any of these buttons, but as we saw above:

  • the Tasks button is button 10
  • the Forward Scroll button is button 11
  • the Backward Scroll button is button 12

Using the above ~/.xbindkeysrc approach, you should be able to map these buttons onto any function that you may find useful. Good luck!

Summary

At this point, your MX1000 should be working exactly to your taste. In summary, what we have done is:

  • Installed evdev and used it as the xorg driver for our MX1000 mouse
  • Mapped the mouse with xev to determine what buttons are recognized by evdev and what their logical button number is
  • Moved any functions that were showing up on the wrong buttons onto the desired buttons (we didn't need to do this with the MX1000, but it is something that will frequently be needed for other mice, so we went through it for completeness)
  • Mapped some desired functions onto the intended buttons via xbindkeys


Of course, this is not MX1000 specific at all - you can apply these steps to ANY mouse and get it working too.

All done! Simple n'est pas? :-) Enjoy your MX1000!