Difference between revisions of "MSI Wind U100"

From ArchWiki
Jump to: navigation, search
m (" don't " -> " do not ")
m (codeline -> ic)
Line 56: Line 56:
  
 
===Webcam===
 
===Webcam===
First, do not forget to activate the webcam with the hotkey Fn+F6. If it's still not working, then try loading the module. The webcam should be supported through the {{codeline|uvcvideo}} module by default, if not:  
+
First, do not forget to activate the webcam with the hotkey Fn+F6. If it's still not working, then try loading the module. The webcam should be supported through the {{Ic|uvcvideo}} module by default, if not:  
 
  # modprobe uvcvideo
 
  # modprobe uvcvideo
  
To load the webcam driver automatically, adding uvcvideo to the {{codeline|MODULES}} array in {{filename|/etc/[[rc.conf]]}} may be needed:
+
To load the webcam driver automatically, adding uvcvideo to the {{Ic|MODULES}} array in {{filename|/etc/[[rc.conf]]}} may be needed:
 
  MODULES=(uvcvideo)
 
  MODULES=(uvcvideo)
  
Line 67: Line 67:
 
===Wireless===
 
===Wireless===
  
Determine which card the particular u100 version has by running {{codeline|lspci}}. These are the possibilities:
+
Determine which card the particular u100 version has by running {{Ic|lspci}}. These are the possibilities:
 
*Realtek 8187se B/G
 
*Realtek 8187se B/G
 
*Ralink RT2860 B/G/N
 
*Ralink RT2860 B/G/N
 
*Atheros AR928X B/G/N
 
*Atheros AR928X B/G/N
  
The {{codeline|lspci}} output should mention the company name.
+
The {{Ic|lspci}} output should mention the company name.
  
 
====Realtek====
 
====Realtek====
Since kernel 2.6.29 there's a working driver included in the staging line. The module is {{codeline|rtl8187se}} and should get loaded without intervention. This network adapter is known to be buggy, so it's unlikely that this driver will show significant progress over its current state. Using [[ndiswrapper]] in place of the in-kernel module is recommended because of this situation.
+
Since kernel 2.6.29 there's a working driver included in the staging line. The module is {{Ic|rtl8187se}} and should get loaded without intervention. This network adapter is known to be buggy, so it's unlikely that this driver will show significant progress over its current state. Using [[ndiswrapper]] in place of the in-kernel module is recommended because of this situation.
  
 
====Ralink====
 
====Ralink====
Line 97: Line 97:
  
 
===LAN===
 
===LAN===
The Ethernet adapter functions thanks to the {{codeline|r8169}} module present in kernels 2.26.31 and newer.
+
The Ethernet adapter functions thanks to the {{Ic|r8169}} module present in kernels 2.26.31 and newer.
  
 
==Memory stick reader==
 
==Memory stick reader==

Revision as of 17:12, 11 December 2011

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.


Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어


External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی

This article pertains to the MSI Wind U100 netbook/sub-notebook.

Hardware

  • CPU: Intel Atom N270 1.6Ghz
  • RAM: 1024 Mb, DDR2 667Mhz (optional)
  • HDD: WD 80Gb SATA (optional)
  • VGA: Intel 945 GMA, 64 MB DDR
  • LCD: 1024x600, 10.2" widescreen
  • WLAN: Realtek RTL8187SE , 802.11 a/b/g
  • LAN: Realtek RTL8101/02
  • CAM: 1.3 Mpix
  • BAT: LI-ON 3 cell 2200 mAh, 2 hours (optional)
  • Bluetooth, card reader, 3x USB 2.0
  • Touchpad: Synaptics or Sentelic

lspci

 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 
 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)

Some have other wireless cards:

 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

Installing

There are several possible ways to install Arch onto a MSI Wind U100. The most usual methods are booting from a USB stick/memory card, or from an external CD/DVD drive. Refer to the Beginners' Guide CD installer part for instructions on obtaining an ISO image and burning to a CD, or consult the USB stick section for indications on writing the image to a USB device.

Regardless of choice, finish by hooking up the external device (CD drive or USB stick) to the notebook. Hold the F11 key while booting in order to get to the boot device menu, then proceed by selecting the appropriate device and install as normal.

CPU overclock

It is possible to overclock the MSI Wind using an upgraded BIOS. The overclock (turbo mode) can be activated with Fn+F10, however, this overclock is not reported in /proc/cpuinfo or by cpufreq-info.

Multimedia

Audio

Audio is supported through ALSA with virtually no configuration. Following the ALSA article should cover all that is needed.

Video

The on-board graphics uses the Intel driver. To install with pacman:

# pacman -S xf86-video-intel

Aside from that, there are no out-of-the-ordinary configuration steps. Consult Xorg and Intel for more information.

Webcam

First, do not forget to activate the webcam with the hotkey Fn+F6. If it's still not working, then try loading the module. The webcam should be supported through the uvcvideo module by default, if not:

# modprobe uvcvideo

To load the webcam driver automatically, adding uvcvideo to the MODULES array in Template:Filename may be needed:

MODULES=(uvcvideo)

The webcam uses a resolution of 640x480. As a warning, recording video with higher resolutions may result in a lower framerate.

Networking

Wireless

Determine which card the particular u100 version has by running lspci. These are the possibilities:

  • Realtek 8187se B/G
  • Ralink RT2860 B/G/N
  • Atheros AR928X B/G/N

The lspci output should mention the company name.

Realtek

Since kernel 2.6.29 there's a working driver included in the staging line. The module is rtl8187se and should get loaded without intervention. This network adapter is known to be buggy, so it's unlikely that this driver will show significant progress over its current state. Using ndiswrapper in place of the in-kernel module is recommended because of this situation.

Ralink

The RT2860 now works out of the box with rt2x00pci drivers.

Atheros

AR5001 (rev 02) works out of the box with ath5k or mad wifi drivers.

Touchpad

Sentelic

The Sentelic Finger Sensing Pad driver (version 1.0.0) is included in kernel 2.26.32 and above, however, it may be difficult to get the configuration utility (fspc) to work correctly. It is possible to configure the pad manually by adding the following lines to your /etc/rc.local

# Disable tap-to-click:
echo -n c>>/sys/devices/platform/i8042/serio1/flags

# Disable vertical tap scrolling:
echo -e \0>>/sys/devices/platform/i8042/serio1/vscroll

# Disable horizontal tap scrolling:
echo -e \0>>/sys/devices/platform/i8042/serio1/hscroll

LAN

The Ethernet adapter functions thanks to the r8169 module present in kernels 2.26.31 and newer.

Memory stick reader

The multi-card reader appears to work automatically.

Power management

pm-utils usually works without issues. However, some users have reported that it may require adding the resume hook and removing the autodetect hook before working correctly.

Resources