Difference between revisions of "MacBookPro11,x"

From ArchWiki
Jump to: navigation, search
(Post installation: fix a lot of template and grammar issues; use sentence case in section headings)
(What doesn't work (updated 7th December 2013): fix section headings; move "updated <date>" info under the section heading; fix grammar issues; improve templates + links as appropriate)
Line 184: Line 184:
** Use hibernate instead
** Use hibernate instead
== What doesn't work (updated 7th December 2013) ==
== What does not work ==
Updated 2013-12-07
=== General ===
=== General ===
=== WiFi ===
=== Wi-Fi ===
* {{ic|broadcom-wl}} from aur works
* {{AUR|broadcom-wl}} from the [[AUR]] works
** Stability is an issue for some
** Stability is an issue for some
=== Webcam ===
=== Web cam ===
* Listed on PCI bus as: Multimedia controller: Broadcom Corporation Device 1570.
* Listed on PCI bus as: Multimedia controller: Broadcom Corporation Device 1570.
* In OSX the camera is listed as FaceTime HD camera 1570.
* In OS X, the camera is listed as FaceTime HD camera 1570.
* No know Linux driver.
* No known Linux driver.
== Discussions ==
== Discussions ==

Revision as of 20:00, 16 January 2014

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary end

Preparing for the Installation

Preparing the hard drive

Assuming you want to dual boot with OS X, so you can update firmware, you have to shrink its partition with Disk Utility. You can either create a HFS+ partition now to override later, or leave it empty.


Booting the live image

Now, download the latest Archboot ISO, write it to USB, and boot from it by selecting it in the Apple boot loader by holding Alt on boot (use rEFIt if you cannot manage to select it). When it comes to the syslinux boot loader, press Tab to edit the entry and append nomodeset to fix screen corruption.


Note: You can skip this if you use the Thunderbolt or USB-to-Ethernet adapter for the installation.


As mentioned below, broadcom-wl is sufficient if you are using the Linux mainline kernel. For custom kernels, you need to use broadcom-wl-dkms. Both are available from the AUR. The easiest way to get Wi-Fi connectivity during install is to build the package driver on a separate system using:

$ curl -O https://aur.archlinux.org/packages/br/broadcom-wl-dkms/broadcom-wl-dkms.tar.gz
$ tar -zxvf broadcom-wl-dkms.tar.gz
$ cd broadcom-wl-dkms
$ makepkg -s

This will give you a package (broadcom-wl-*.pkg.tar.xz) which can be installed using pacman. Put this package on a USB drive, mount it, and install the package using

# pacman -U broadcom-wl-*.pkg.tar.xz
# modprobe wl

during install. You may now use wifi-menu to connect to your network of choice.

Note: You need to repeat this process when you have finished your installation, for instance when booting into the system for the first time or when you have chrooted your install.

The installation

Note: Refer to the MacBook page if you do not want to have a separate partition for GRUB but rather prefer to use rEFInd (or rEFIt).

Run the installation wizard.

Tip: If you want to use the native MacBook bootloader, you need an extra partition of at least 128 MiB.


Using the MacBook's native EFI bootloader

This method uses the MacBook's native EFI bootloader, i.e. the one the can be reached when holding the alt-key during boot.

Note: For this method you need an extra partition of at least 128 MiB. This partition will be used by the MacBook's native bootloader to launch Arch. It also assumes that you are dual-booting OS X and Arch.

At the end of the install process we would normally install GRUB or a variation the the drive. For this method we will place a boot.efi file on an extra partition used by the MacBook's native bootloader.

First, install the grub package from the official repositories.

When generating a boot.efi file, GRUB looks to /etc/default/grub for its configuration. Edit the parameter GRUB_CMDLINE_LINUX_DEFAULT to look something like this:

GRUB_CMDLINE_LINUX_DEFAULT="quiet rootflags=data=writeback libata.force=noncq"

The libata.force=noncq parameter will prevent SSD lockups and the rootflags option is used for SSD-performance.

Note: Do not use the rootflags option on Btrfs. It is not supported.

Now we generate the boot.efi file:

# grub-mkconfig -o /boot/grub/grub.cfg
# grub-mkstandalone -o boot.efi -d /usr/lib/grub/x86_64-efi -O x86_64-efi /boot/grub/grub.cfg

Put this file on a USB (or other OS X accessible media) and reboot into OS X.

Launch DiskUtility.app and erase the extra partition, mentioned above, to HFS+ and mount it.

$ mkdir -p <Path to root of extra partition>/System/Library/CoreServices
$ mkdir <Parth to root of extra partition>/mach_kernel

Copy the boot.efi file to the <Path to extra partition>/System/Library/CoreServices/ directory. Using your editor of choice, create a SystemVersion.plist file in the CoreServices directory, which is located here:

<path to extra partition>/System/Library/CoreServices/SystemVersion.plist

Edit that file to look like this:

<xml version="1.0" encoding="utf-8"?>
<plist version="1.0">
    <string>Arch Linux</string>

The last step is then to bless the extra partition using:

# bless --device disk0sX --setBoot

Where disk0sX is the extra partitions id. The id can be found using either DiskUtility.app or by issuing:

# diskutil list
Note: If you change kernel or need to modify the boot process, you will most likely need to re generate the boot.efi file. Simply replace the old boot.efi on the extra partition with the new one.

Direct EFI booting (rEFInd)

See: UEFI_Bootloaders

As of August 2013, refind can automatically detect the Arch kernel, removing the need for copying the kernel into the EFI partition. Simply install refind without the EFI file system drivers [1] using the --nodrivers option [2], and enable the scan_all_linux_kernels and also_scan_dirs options in refind.conf (see link above for instructions.)

GRUB (with OS X)

Another solution is to install GRUB. Edit /tmp/install/boot/grub/grub.cfg and edit the boot entry to load Linux mainline instead of the normal one. You might want to append nomodeset to the kernel line again, at least for now.

Note: libata.force=noncq helps with hangs due to SSD speed.

Now cd into /tmp/install/ and create the GRUB image by running:

grub-mkstandalone -o bootx64.efi -d usr/lib/grub/x86_64-efi -O x86_64-efi -C xz boot/grub/grub.cfg

This will create file called boot64.efi which contains GRUB and the configuration file incorporated inside. It is important to cd into the right directory to make it pick up the configuration file and put it into the right place within the image.

Copy this file to the MacBook's EFI partition. The downside of this method is that you need to repeat this step whenever you want to change the GRUB config. Reboot the machine and you should be able to select your installed Arch Linux by keeping the Alt button pressed. It should appear as EFI boot.

To generate a nicer config use: grub-mkconfig, (add in nomodeset if you are using framebuffer), remove quiet if you like the text, then to update your GRUB post-installation, do this to make the GRUB EFI file and put it in the EFI partition:

cd /
grub-mkstandalone -o bootx64.efi -d usr/lib/grub/x86_64-efi -O x86_64-efi -C xz boot/grub/grub.cfg
sudo mount /dev/sda1 /mnt
sudo cp bootx64.efi /mnt/EFI/boot/bootx64.efi

Post installation


Largest console font (although ugly) achieved by adding FONT=sun12x22 to /etc/vconsole.conf It is still tiny but is at least readable.


MacBook Pro 11,1

  • Intel works fine

MacBook Pro 11,2

MacBook Pro 11,3

See HiDPI for information on how to tweak the system for a Retina screen.

If you are using Xfce, you will probably experience tearing in Firefox, VLC, etc. Until newer versions of xfwm support OpenGL rendering, use another compositing window manager like compton with backend = "glx".


If you do not want to hear the annoying sound at system start-up, one way to get rid of it is to turn sound off while under Mac OS.

Volume keys can be made to work with xfce4-volumed (if you are using Xfce).

Also, if you are using PulseAudio, sometimes it thinks HDMI is the default sound card; to solve this problem, install pavucontrol and set Analog Stereo as the fallback device.


One method is to install xf86-input-synaptics and configure to your liking in /etc/X11/xorg.conf.d/50-synaptics.conf:

Section "InputClass"
    MatchIsTouchpad "on"
    Identifier      "touchpad catchall"
    Driver          "synaptics"
    # 1 = left, 2 = right, 3 = middle
    Option          "TapButton1" "1"  
    Option          "TapButton2" "3"
    Option          "TapButton3" "2"
    # Palm detection
    Option          "PalmDetect" "1"
    # Horizontal scrolling
    Option "HorizTwoFingerScroll" "1"
    # Natural Scrolling (and speed)
    Option "VertScrollDelta" "-100"
    Option "HorizScrollDelta" "-100"

Keyboard backlight

Screen backlight

  • Intel, works on Linux 3.13
  • Framebuffer, works for MacBook Pro 11,1 and 11,3 via /sys/class/backlight/gmux_backlight/brightness.
  • Nvidia, does not work


  • Works on MacBook Pro 11,2 with Linux 3.13
  • No backlight after suspend with Linux 3.12
    • Use hibernate instead

What does not work

Updated 2013-12-07



Web cam

  • Listed on PCI bus as: Multimedia controller: Broadcom Corporation Device 1570.
  • In OS X, the camera is listed as FaceTime HD camera 1570.
  • No known Linux driver.


See Also