|Summary help replacing me|
|Details the installation and configuration of Arch Linux on Apple's MacBook Pro 7,1|
Using mid 2012/12 installation media, I primarily followed this GIST in conjunction with the MacBook EFI installation instructions to install an x86_64 system. The GRUB2 page is invaluable. Installing rEFIt is not necessary.
$ lspci -vnn -d 14e4:
If from this you discover that your full PCI-ID is
[14e4:432b], then the following advice applies to you: Don't waste time on the
b43 driver. I've been fiddling with it for weeks, and switching to
broadcom-wl made all the problems go away.
broadcom-wl might make your device names funky, but that's easily fixed with the udev rule documented on Broadcom Wireless.
I also recommend
Nouveau works out of the box, performance however is not that great and your system will get quite hot when running nouveau.
Nvidia's drivers work, but so far only when booting the mac in csm- or legacy-mode. See here for some discussion on the topic.
In short, booting in efi-mode, will crash the nvidia module, resulting in a black screen, so in order to use nvidia's driver, you'll need to boot your machine in csm-mode.
This can't be achieved directly, but depends on apple's firmware agreeing that your partition layout warrants this as presumably they implemented the feature to allow booting of windows xp/7, neither which can ordinarily boot off a gpt partitioned disk.
See here for more information on how to setup a hybrid mbr.
To be continued..