use latest version in http://releng.archlinux.org/isos/
install b43-firmware-latest from AUR.
download the latest package from http://linuxwireless.org/download/compat-wireless-2.6/
$ cd compat-wireless-2011-10-09 $ scripts/driver-select b43 $ make $ sudo make install $ sudo make wlunload $ sudo rmmod bcma $ modprobe b43 # it should works.
add 'blacklist bcma' to '/etc/modprobe.d/modprobe.conf'
Note that after every kernel update you will have to recompile the module for the new kernel:
$ cd compat-wireless-2011-10-09 $ make clean $ make $ sudo make install
Ethernet: works out-of-the-box
Keyboard & TouchPad
default F1 key represents XF86MonBrightnessDown, if you want it represents to F1.
echo 2 > /sys/module/hid_apple/parameters/fnmode # value 1: F1 is XF86MonBrightnessDown # value 2: F1 is F1, Fn + F1 is XF86MonBrightnessDown.
and put that into /etc/rc.local
Two finger scrolling and left-click works out of the box. Unfortunately the right-click is not functional.
To enable most of the multitouch touchpad features (even right and middle clik) use mtrack, which is avaible in AUR. The configuration is done via the /etc/X11/xorg.conf.d/10-mtrack.conf file. Check if the mtrack module is properly loaded in the /var/log/Xorg.0.log file. Sometimes xorg loads other drivers before, like eg. synpatics, and the mtrack driver is not used at all.
Video & Screen
Intel HD Graphics 3000: works with xf86-video-intel
Adjust Brightness: works with xorg-xbacklight For example:
xbacklight -inc 7 # increase brightness xbacklight -dec 7 # decrease brightness
15-inch and 17-inch
AMD Radeon HD 6490M: Unknown
AMD Radeon HD 6750M: works with xf86-video-ati
Adjust Brightness: boot into Mac OS X and change it, then boot back.
8,1 and 8,2
$ alsamixer # unmute 'Front Speaker' and 'Surround Speaker'
Suspend & Hibernate
For s2ram install uswsusp-git and add to file /etc/pm/config.d/module following content:
SUSPEND_MODULES="bcma b43" SLEEP_MODULE=uswsusp
Without this, system hangs after the machine wakes up and tries to reconnect to the wireless network.
HFS is mounted as Read-Only. By turning journaling off in OS X, the HFS+ file system will be read/write under Linux.
I had problems pairing devices, nothing was detected with
There seems to be a conflict between the bluetooth module and the b43 one (wifi), as written in this blog post. The solution is to do the following:
# rmmod b43
pair your bluetooth device
# modprobe b43
/etc/modprobe.d/b43.conf with the following content:
options b43 btcoex=0
Others that works-out-of-the-box