Master Boot Record
The Master Boot Record (MBR) is the first 512 bytes of a storage device. The MBR is not a partition; it is reserved for the operating system's bootloader and the storage device's partition table. A newer alternative to MBR is the GUID Partition Table, which is part of the Unified Extensible Firmware Interface specification.
Booting is a multi-stage process. Most PCs today initialize system devices with firmware called the BIOS (Basic Input/Output System), which is typically stored in a dedicated ROM chip on the system board. After system devices have been initialized, the BIOS looks for the bootloader on the MBR of the first recognized storage device (hard disk drive, solid state drive, CD/DVD drive, USB drive...) or the first partition of the device. It then executes that program. The bootloader reads the partition table, and is then capable of loading the operating system(s). Common GNU/Linux bootloaders include GRUB and Syslinux.
The MBR consists of a short piece of assembly code (the initial bootloader – 446 bytes), a partition table for the 4 primary partitions (16 bytes each) and a sentinel (0xAA55).
The "Conventional" Windows/DOS MBR bootloader code will check the partition table for one and only one active partition, read X sectors from this partition and then transfer control to the operating system. The Windows/DOS bootloader can not boot an Arch Linux partition because it is not designed to load the Linux kernel, and it can only cater for an active, primary partition (which GRUB safely ignores).
The GRand Unified Bootloader (GRUB) is the de facto standard bootloader for GNU/Linux, and users are recommended to install it on the MBR to allow booting from any partition, whether it be primary or logical.
Backup and restoration
Because the MBR is located on the disk it can be backed up and later recovered.
To backup the MBR:
# dd if=/dev/sda of=/path/mbr-backup bs=512 count=1
Restore the MBR:
# dd if=/path/mbr-backup of=/dev/sda bs=512 count=1
To erase the MBR (may be useful if you have to do a full reinstall of another operating system) only the first 446 bytes are zeroed because the rest of the data contains the partition table:
# dd if=/dev/zero of=/dev/sda bs=446 count=1
Restoring a Windows boot record
By convention (and for ease of installation), Windows is usually installed on the first partition and installs its partition table and reference to its bootloader to the first sector of that partition. If you accidentally install a bootloader like GRUB to the Windows partition or damage the boot record in some other way, you will need to use a utility to repair it. Microsoft includes a boot sector fix utility
FIXBOOT and an MBR fix utility called
FIXMBR on their recovery discs, or sometimes on their install discs. Using this method, you can fix the reference on the boot sector of the first partition to the bootloader file and fix the reference on the MBR to the first partition, respectively. After doing this you will have to reinstall GRUB to the MBR as was originally intended (that is, the GRUB bootloader can be assigned to chainload the Windows bootloader).
If you wish to revert back to using Windows, you can use the
FIXBOOT command which chains from the MBR to the boot sector of the first partition to restore normal, automatic loading of the Windows operating system.
Of note, there is a Linux utility called
ms-sys (package AUR in AUR) that can install MBR's. However, this utility is only currently capable of writing new MBRs (all OS's and file systems supported) and boot sectors (a.k.a. boot record; equivalent to using
FIXBOOT) for FAT file systems. Most LiveCDs do not have this utility by default, so it will need to be installed first, or you can look at a rescue CD that does have it, such as Parted Magic.
First, write the partition info (table) again by:
# ms-sys --partition /dev/sda1
Next, write a Windows 2000/XP/2003 MBR:
# ms-sys --mbr /dev/sda # Read options for different versions
Then, write the new boot sector (boot record):
ms-sys -(1-6) # Read options to discover the correct FAT record type
ms-sys can also write Windows 98, ME, Vista, and 7 MBRs as well, see