Master Boot Record

From ArchWiki
Revision as of 16:07, 15 December 2009 by Gen2ly (talk | contribs) (Moved warning down to correspond to the restore statement.)
Jump to: navigation, search

Template:Article summary start Template:Article summary text Template:Article summary heading Template:I18n entry Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary end

The MBR is the first sector (first 512 bytes) of a storage device. The MBR is not a partition and it is reserved for the operating systems bootloader and the storage device's partition table.

Boot Process

Booting is a multi-stage process. Most PCs today initialize system devices by firmware called the BIOS (Basic Input/Output System). The BIOS is typically contained within the CMOS (Ceramic Metal Oxide Semiconductor) that is executed upon system power-up. After system devices have been initialized, the BIOS then looks for the bootloader on the MBR of the first recognized storage device (hard disk drive, solid state drive, CD/DVD drive, USB drive...) or the first partition of the device. It then exectutes that program. The bootloader reads the partition table and is then capable of loading the operating system(s). Common GNU/Linux bootloaders include GRUB and LILO.


The MBR consists of a short piece of assembly code (the initial bootloader – 446 bytes), a partition table for the 4 primary partitions (16 bytes each) and a sentinel (0xAA55).

The "Conventional" Windows/DOS MBR bootloader code will check the partition table for one and only one active partition, read X sectors from this partition and then transfer control to the operating system. The Windows/DOS bootloader can not boot an Arch Linux partition because it is not designed to load the Linux kernel, and it can only cater for an active, primary partition (which GRUB safely ignores).

The GRand Unified Bootloader (GRUB) is the de facto standard bootloader for GNU/Linux, and users are recommended to install it on the MBR to allow booting from any partition, whether it be primary or logical.

- Source

Backup and restoration

Because the MBR is located on the disk it can be backed up and later recovered.

To backup the MBR:

dd if=/dev/hda of=/path/mbr-backup bs=512 count=1

Restore the MBR:

dd if=/path/mbr-backup of=/dev/hda bs=512 count=1
Warning: Restoring the MBR with a mismatching partition table will make your data unreadable and nearly impossible to recover. If you simply need to reinstall the bootloader see GRUB or LILO.

To erase the MBR (may be useful if you have to do a full reinstall of another operating system):

dd if=/dev/zero of=/dev/hda bs=446 count=1