Mouse polling rate

From ArchWiki
Revision as of 11:17, 30 June 2012 by Feilen (talk | contribs) (Setting the polling rate)
Jump to: navigation, search

If you have invested in a high resolution mouse, adjusting the USB polling rate is a common trick to utilise the added precision it brings. The polling rate (or report rate) determines how often the mouse sends information to your computer. Measured in Hz, this setting equates to lag time (in ms).

By default, the USB polling rate is set at 125hz. The table below represents combinations of Hz values and their corresponding delay time:

Hz ms
1000 1
500 2
250 4
125 8
100 10

If the polling rate is set at 125 Hz, the mouse cursor can only be updated every 8 milliseconds. In situations where lag is critical (for example games), it is useful to decrease this value to as little as possible. Increasing the polling interval will improve precision at the tradeoff of using more CPU resources, therefore care should be taken when adjusting this value.

Setting the polling rate

Here we are using the usbhid module of the kernel to set a custom "mousepoll" rate. Simply add the following line to your /etc/modprobe.d/modprobe.conf file:

options usbhid mousepoll=[polling interval]

(where [polling interval] is a number in ms from the table above. For example, to set a polling rate of 500Hz:

options usbhid mousepoll=2

To change the polling rate without rebooting

modprobe -r usbhid && modprobe usbhid
Warning: Make sure that both commands execute otherwise you will be unable to use the mouse and keyboard and will have to reboot or ssh into your machine.

Then unplug and replug your mouse.

Template error: are you trying to use the = sign? Visit Help:Template#Escape template-breaking characters for workarounds.

Displaying current mouse rate

A tool exists (named evhz) that can display the current mouse refresh rate -- useful when checking that your customised polling settings have been applied.

The original source no longer exists ([1]), so a mirror has been provided here: evhz.c. Full credit goes to the original author, Alan Kivlin.

Compile it with:

gcc -o evhz evhz.c

If compiling fails with the following message

evhz.c: In function ‘main’:
evhz.c:36:2: warning: incompatible implicit declaration of built-in function ‘memset’ [enabled by default]


#include <string.h>
To the includes part of the code and retry.

Then execute as root:


Alternatively, Windows tools such as DirectX mouserate checker can be run using WINE.

Further Reading