Difference between revisions of "Multihead"
m (→Window managers)
(→Window managers: Add XMonad info)
|Line 217:||Line 217:|
* [[MATE]] - works
* [[MATE]] - works
* [[i3]] - works
* [[i3]] - works
Revision as of 16:44, 1 March 2013
Having multiple screens is still somewhat uncommon, many programs are not written to handle a system with multiple screens and display incorrectly. This article covers both advanced configuration of a so called multihead system, as well as various workarounds for those programs which need help to work correctly in a multihead environment.
Xinerama, TwinView and separate screens
When configuring a multihead X-Windows workstation, a decision needs to be made about how each screen will be configured.
This is the original way of configuring multiple monitors with X, and it has been around for decades. Each physical monitor is assigned as an X screen, and while you can move the mouse between them, they are more or less independent.
Normally the X display has a single identifier such as
:0 set in the
DISPLAY environment variable, but in this configuration each screen has a different
$DISPLAY value. The first screen is
:0.0, the second is
:0.1 and so on.
With this configuration it is not possible to move windows between screens, apart from a few special programs like GIMP and Emacs which have multi-screen support. For most programs you must change the
DISPLAY environment variable when launching to have the program appear on another screen:
# Launch a terminal on the second screen $ DISPLAY=:0.1 urxvt &
Alternatively if you have a terminal on each screen launching programs will inherit the
DISPLAY value and appear on the same screen they were launched on. But moving an application between screens involves closing it and reopening it again on the other screen.
Working this way does have certain advantages, such as windows popping up on one screen won't steal the focus away from you if you are working on another screen - each screen is quite independent.
This is the official way of doing genuine multihead X. Screens are configured as separate X screens like in the previous section, but Xinerama combines all screens into a single display (
:0) making it possible to drag windows between screens.
This is the only way to get complex multihead support, such as being able to move windows between screens that are connected to different video cards, possibly from different manufacturers, with some in landscape and others in portrait mode.
Simple Xinerama layouts can be configured with
xrandr however for more complex control, custom X configuration files must be created. Here are some examples.
This is a ServerLayout section which controls where each monitor sits relative to the others.
Section "ServerLayout" Identifier "Main" Screen 0 "Primary" Screen 1 "DellPortraitLeft" RightOf "Primary" Screen 2 "Wacom" RightOf "DellPortraitLeft" Screen 3 "U2412" LeftOf "Primary" Option "Xinerama" "1" # enable XINERAMA extension. Default is disabled. EndSection
Each Screen in the above section is defined in a separate file, such as this one:
# Define the monitor's physical specs Section "Monitor" Identifier "Dell 2001FP" VertRefresh 60 Option "dpms" "on" # Modelines are probably unnecessary these days, but it does give you fine grained control # 1600x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 160.96 MHz Modeline "1600x1200" 160.96 1600 1704 1880 2160 1200 1201 1204 1242 -HSync +Vsync EndSection # Define a screen that uses the above monitor. Note the Monitor value matches the above # Identifier value, and the Device value matches one of the video cards defined below # (the card and connector this monitor is actually plugged in to.) Section "Screen" Identifier "DellPortraitLeft" Device "GeForce 8600GTb" Monitor "Dell 2001FP" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1600x1200" ViewPort 0 0 Virtual 1600 1200 EndSubsection # This screen is in portrait mode Option "Rotate" "left" EndSection
You will need to create a
Device section for each monitor, i.e. a dual head video card will have two Device sections. The following example shows how to configure two video cards each providing two outputs, for a total of four monitors.
# First head of first video card in the system Section "Device" Identifier "GeForce 8600GT" Driver "nvidia" # If you have multiple video cards, the BusID controls which one this definition refers # to. You can omit it if you only have one card. BusID "PCI:1:0:0" # Need to flag this as only referring to one output on the card Screen 0 # For nVidia devices, this controls which connector the monitor is connected to. Option "UseDisplayDevice" "DFP-0" # We want control! Option "DynamicTwinView" "FALSE" # Various performance and configuration options Option "AddARGBGLXVisuals" "true" Option "UseEDIDDpi" "false" Option "DPI" "96 x 96" Option "Coolbits" "1" EndSection # Second head of same video card (note different Identifier but same BusID.) We can omit # the UseDisplayDevice option this time as it will pick whichever one is remaining. Section "Device" Identifier "GeForce 8600GTb" Driver "nvidia" BusID "PCI:1:0:0" # This is the second output on this card Screen 1 # Same config options for all cards Option "AddARGBGLXVisuals" "true" Option "UseEDIDDpi" "false" Option "DPI" "96 x 96" Option "Coolbits" "1" Option "DynamicTwinView" "FALSE" EndSection # First head of second video card, note different BusID. Section "Device" Identifier "G210" Driver "nvidia" BusID "PCI:2:0:0" Screen 0 # Same config options for all cards Option "AddARGBGLXVisuals" "true" Option "UseEDIDDpi" "false" Option "DPI" "96 x 96" Option "Coolbits" "1" Option "DynamicTwinView" "FALSE" EndSection # Second head of second video card. Output connector is set here, which means the previous # Device will use the other connector, whatever it may be. Section "Device" Identifier "G210b" Driver "nvidia" BusID "PCI:2:0:0" Screen 1 Option "UseDisplayDevice" "DFP-1" # Same config options for all cards Option "AddARGBGLXVisuals" "true" Option "UseEDIDDpi" "false" Option "DPI" "96 x 96" Option "Coolbits" "1" Option "DynamicTwinView" "FALSE" EndSection
TwinView is nVidia's extension which makes two monitors attached to a video card appear as a single screen. TwinView provides Xinerama extensions so that applications are aware there are two monitors connected, and thus it is incompatible with Xinerama. However if you only have two monitors and they are both connected to the same nVidia card, there is little difference between TwinView and Xinerama (although in this situation TwinView may offer slightly better performance.)
If you wish to attach more than two monitors or monitors attached to other video cards, you will need to use Xinerama instead of TwinView. Likewise at the time of writing, both monitors must be in the same orientation - you cannot have one in landscape and the other in portrait mode.
In the past, TwinView was the only way to get OpenGL acceleration with nVidia cards while being able to drag windows between screens. However modern versions of the nVidia closed-source driver are able to provide OpenGL acceleration even when using Xinerama.
Full screen games
Many games require their window to appear at (0,0) when running in full-screen. If the screen you have at (0,0) - the left-most one - is not one you wish to game on, it is almost impossible to move a full-screen game onto a different screen.
A workaround for this is to create a separate X11 configuration (a new layout) just for playing games, which may have less (or only one) screen configured. You can then launch games using this separate layout, while normal desktop work uses the original multihead configuration.
To create a new layout, copy
/etc/X11/xorg.d/90-serverlayout.conf and call it
91-serverlayout-gaming.conf. It is important to use a number larger than 90, as the one with the lowest number will become the default used when you first load X.
Adjust this new configuration file to your preferred gaming configuration. Here is an example (based on the example Xinerama configuration above) with only one screen defined, noting that the screen specifics (such as resolution) are defined in other files and are unchanged from and shared with the normal configuration:
# New screen layout only using a single screen called "Primary" Section "ServerLayout" Identifier "Gaming" Screen 0 "Primary" Absolute 0 0 EndSection
To use this new layout, launch the game via the
# Launch Xonotic on a new X11 display using the "Gaming" layout startx /usr/bin/xonotic-glx -fullscreen -- :1 -layout Gaming
- You must specify the full path to the command to run, here
:1must refer to an empty unused display. The first display you are likely using for your desktop is
:1will be fine for most people. But should you want to launch a second game at the same time, you would have to change this to
- Just as you can switch between text consoles with Alt+Ctrl+F1 and back to X with Alt+Ctrl+F7, the new display will sit on Alt+Ctrl+F8. So you can switch back to your desktop with Alt+Ctrl+F7 and back to the game with Alt+Ctrl+F8. This is because you are running an independent X desktop, so if you switch out of the game with Alt+Tab or equivalent there will be an empty desktop with no window manager running.
This section lists tips for individual applications.
- mplayer: use
-xineramascreen 1to make the video play on screen #1 (the second screen.) Add
~/.mplayer/configto make permanent.
- Xonotic: if you are playing across multiple screens and you are unable to turn left/right properly, set
vid_stick_mouseto 1 in
This section lists window managers and how they cope with multiple monitors.