- Mumble is a voice over IP (VOIP) application primarily designed for use by gamers, similar to programs such as TeamSpeak and Ventrilo.
This page goes over installation and configuration of both the client portion of the software (Mumble) and the server portion (Murmur).
When you first launch the client, a configuration wizard will take you through the setup process. Settings can be changed later through the menu.
The Mumble project maintains a good guide for setting up the server here: Murmurguide. What follows is a quick-and-dirty, abridged version of that guide.
The postinstall script will tell you to reload dbus and set the supervisor password. The default configuration doesn't use dbus, so you can ignore that if you want. Setting the supervisor password is recommended, however.
If you use a Firewall, you'll need to open TCP and UDP ports 64738. Depending on your network, you may also need to set a static IP, port forwarding, etc.
The default murmur config file is at
/etc/murmur.ini and is heavily commented.
Reading through all the comments is highly recommended.
Enable and then start murmur with
systemctl enable murmur and
systemctl start murmur.
If all went smoothly, you should have a functioning murmur server.