- 1 About this document
- 2 Setting up the hardware
- 3 Getting the first digital signal
- 4 Getting the first picture
- 5 Installing XMLTV=
- 6 Installing MythTV
- 7 Linking XMLTV and MythTV
- 8 Setting up MythTV
- 9 Running MythTV
About this document
What is MythTV
MythTV is a Linux based Personal Video Recorder. It acts as an intelligent combined television and video recorder. There are many plugins for it which expand its basic functionality.
Why two entries in the Wiki
There already exists a wiki entry for installing mythtv. However, it does lack detail for the less experienced user. I wanted to write a "from beginning to end" installation guide for mythtv ; to do that would require editing the original MythTV HOWTO pretty drastically. I would recommend reading both guides.
The downside to my approach is that the instructions are 'specific' for my hardware and my location.
Localisation and Hardware variations
MythTV can cope with a wide variety of hardware. There are two main things that change from system to system which require significant setting up.
Firstly, the video capture card. There are many of these and they are often subtly different. MythTV does a pretty good job of detecting and configuring hardware.
Secondly, the location. MythTV has an Electronic Program Guide (EPG) built in, so that programmes can be recorder and viewed easily. There is a common way of setting this up using a program called XMLTV, which extracts data from web sites or other data providers. Some devices (for example DVB-T cards) also require transmitter information.
Some digital systems can use the EPG which is part of the signal. This is currently in development.
My personal information
This guide is written 'as I do it'. However, this is for my hardware in my location, and you are almost certainly different. I will offer suggestions for alternatives where appropriate. It is always worth reading installation guides for other machines ; the process of installation does not vary significantly. If you have a common video capture card, you can find help in most cases ..... somewhere. The MythTV website is a good place to start.
I'm running Arch Linux 0.8 (Voodoo) with an Nvidia card. The "important" piece of hardware though is my DVB-T capture card. DVB-T is known in the UK as "Freeview" ; it is digital television transmitted down the 'standard' aerial.
Other alternatives are the old analogue system, DVB-S (satellite) and DVB-C (cable),
The capture card I am using is a Hauppauge WinTV "NOVA" model, which fits internally in one of the PCI expansion slots. It is highly recommended for DVB-T reception and it is pretty cheap.
I live in Norfolk in England, and my nearest transmitter is in Tacolneston. Fortunately this is about 5 miles away which means I can "get away with" an indoor aerial, normally DVB=T requires an outdoor aerial. It is rather like FM radio ; you either get a good signal or none at all.
Setting up the hardware
Fortunately my hardware is autodetected by the Arch 0.8 Kernel, or almost completely. It does not install the cx88_dvb module which is required for my system.
Checking it exists
if you do either
it will list all the devices connected to the PCI bus or the USB bus respectively. You should see something which roughly describes your hardware. In my case, lspci produces
02:01.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 02:01.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 02:01.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
you can also look at the boot log by typing
dmesg | less
this shows what the system is doing as it 'boots up' ; somewhere you will hopefully see text which describes your card. In my case, a part of the log is
Linux video capture interface: v2.00 cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded CORE cx88: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
there is a great deal more descriptive information, but this is very hardware specific.
Putting in the module
To force the Kernel to load the cx88_dvb module I changed my rc.conf file so the "MODULES" line reads as follows
This will force the kernel to load the module at start up. The r8169 module is my network card and is likely to be different on your system.
You can reboot it ; if you don't want to, load it yourself, just this once, with
Checking it works
The simplest way to check it works initially, and that the system has recognised it is to check for the existence of the video device(s) in linux.
checks for analogue devices and
checks for digital devices. In both cases you should see a list of device links (like a directory listing). If these are present then linux has probably recognised the card, and it might work.
The next stage is to try and see if it is picking up any signal.
Getting the first digital signal
This part is very specific to DVB-T. For a standard analogue card, you have to do very little ; for DVB-C and DVB-S I do not know.
The first thing to do is to install linux-dvb-apps.
pacman -S linuxtv-dvb-apps
What transmitter do I use ?
Each transmitter transmits DVB-T signals on a different frequency. You need to find a file which describes your local transmitter frequencies.
The simplest way in the UK is to use the WolfBane website at http://www.wolfbane.com. If you click on "UK digital TV reception predictor" you can enter your postal code (what we call the "zip code") and it will tell you what transmitters are available.
The next stage is to find the "ukxxxx" file.
What is the ukXXXX file ?
The ukxxxx file is the file that describes how your transmitter transmits DVB-T data. For my transmitter, Tacolneston, it looks like this :-
# UK Tacolneston # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy T 730166670 8MHz 3/4 NONE QAM16 2k 1/32 NONE
I have no idea what it means either, if it's any consolation. Not that it matters much, as long as it works.
How do I find it ?
Unfortunately there is no central repository of these - as far as I know anyway (!). If you have installed linuxtv-dvb-apps (i.e. you're following the instructions) you should find a listing of these in the /usr/share/dvb-utils/scan/dvb-t directory.
There's about 30 listed here from various countries (including Australia, the UK and the Netherlands). If your transmitter is not listed here, as uk-Tacolneston wasn't, then you have to hunt on the web ; I googled for things like "DVB-T Transmitter MythTV Tacolneston" and the like, and found a gentleman called Adam Bower had already done the work for me ; thanks, Adam.
What is channels.conf ?
Having acquired your transmitter information (in my case, in the file uk-Tacolneston, you now query your local transmitter to see what channels it has to offer. These contain things like channel details and the tuning frequencies, go in a file commonly called "channels.conf". Once you have this, it should be easy to get your system watching television using mplayer.
Generating the channels.conf ?
You may be able to find a channels.conf for your transmitter already. If you can't, to create our channels.conf we use a program called 'scan' (part of the linux-dvb-apps we installed earlier)
scan uk-Tacolneston >channels.conf
This should print out reams of gobbledegook, hopefully without error messages. If there are error messages, check your signal strength (do you need a better aerial ?) and your frequencies, which may be wrong.
If you open channels.conf in an editor it should look something like this (lines truncated slightly here !)
Five:730166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2 (etc) Five Life:730166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC (etc) Five US:730166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1 (etc)
except there will be more of it (one line for each channel). The first things on each line should be recognisable as the channels available on your local service. The names are often truncated.
Getting the first picture
This part is again only applicable to DVB-T transmissions. The next part is to check the card is working by - watching some television.
Install and run Mplayer
My preferred viewer is mplayer (though you can do this with xine as well - the process is identical). To view the television in mplayer, firstly install it once and run it.
pacman -S mplayer mplayer
It is run once to create the .mplayer subdirectory in your home directory, which will contain your channels.conf file.
Making Mplayer work with DVB-T
To make mplayer work with DVB you have to tell it about the channels it can read. The simplest way of doing this is to copy the channels.conf file into your .mplayer directory
cp /aux/arch/channels.conf /home/paulr/.mplayer
(Your command may vary depending on your login name and the directory you put the channels.conf file)
You should now be able to watch TV. Look at one of the channels in your channels.conf. I shall choose the TV channel BBC1. The line from channels.conf looks like this.
BBC ONE:810000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4 (etc).
to watch BBC1, you use the name of the channel - the line as far as the first colon. In this case
mplayer dvb://"BBC ONE"
Replace BBC ONE with the channel you wish to watch. With a bit of luck, if everything has worked, that should open a window and start playing the channel in glorious LinuxColour ; in this case , BBC1.
If not ... search the internet checking error messages :) If the previous stage worked (getting the uk-xxxxx and channels.conf) it's a bit puzzling that it doesn't work.
If you've got this far you can be pretty sure you will get MythTV to work properly - eventually. There's a bit more setting up to be done yet. It is not that difficult to get MythTV working, recording, display video, and so on. The hard bit - in my experience anyway - is getting the EPG working.
But it *is* worth it. MythTV watching is a whole new way of looking at television ; it's a whole new way of thinking about television. Without DRM.
"I think this is getting needlessly messianic." (Fook, Hitch Hikers Guide to the Galaxy)