Difference between revisions of "Netatalk"

From ArchWiki
Jump to: navigation, search
(Netatalk: Expand on the configuration for v3)
(Installation)
Line 15: Line 15:
  
 
==Installation==
 
==Installation==
Install your finished package with pacman as usual, and remember to add "netatalk" to the daemons list in {{Ic|/etc/rc.conf}}.
+
Install your finished package with pacman as usual, and remember to add "netatalk" to the daemons list in {{Ic|/etc/rc.conf}}. If using systemd, and compiled with {{Ic|--with-init-style=systemd}}, remember to {{Ic|systemctl enable netatalk.service}}.
  
 
Besides the configuration files that are installed (and checked during upgrade), netatalk may generate two files {{Ic|/etc/netatalk/afp_signature.conf}} or {{Ic|/opt/netatalk/afp_signature.conf}} which holds the system UUID, and {{Ic|/etc/netatalk/afp_voluuid.conf}} or {{Ic|/opt/netatalk/afp_voluuid.conf}} which holds volume UUIDs for TimeMachine. These files may remain after package removal and should be kept in most cases to disambiguate the services broadcast over the local network.
 
Besides the configuration files that are installed (and checked during upgrade), netatalk may generate two files {{Ic|/etc/netatalk/afp_signature.conf}} or {{Ic|/opt/netatalk/afp_signature.conf}} which holds the system UUID, and {{Ic|/etc/netatalk/afp_voluuid.conf}} or {{Ic|/opt/netatalk/afp_voluuid.conf}} which holds volume UUIDs for TimeMachine. These files may remain after package removal and should be kept in most cases to disambiguate the services broadcast over the local network.

Revision as of 15:59, 24 August 2012

Netatalk v3.0 is a free, open-source implementation of the Apple Filing Protocol (AFP). It allows Unix-like operating systems to serve as file servers for Macintosh computers.

The older version of netatalk, v2.2.3, is distributed as netatalk-ddp and supports the Apple Macintosh network protocols, including AppleTalk (ATalk), Apple Filing Protocol (AFP), and Printer Access Protocol (PAP).

Compiling

Use either the netatalk or netatalk-ddp packages available in AUR, which have initscripts tailored for ArchLinux.

Choosing Features

With the deprecation of DDP (ATalk, PAP, timelord, and a2boot were removed in v3.0), netatalk has been divided into netatalk and netatalk-ddp. DDP is only necessary to support Mac OS <= 9, but OS X <= 10.3 will also benefit from the integration of SLP since it does not fully support Bonjour/Zeroconf. DDP would network older Macs which ran on AppleTalk instead of TCP/IP, and timelord and a2boot were for time-synchronization and Apple II booting. PAP may still be necessary for users with LaserWriter printers without TCP/IP support.

A build of the netatalk AUR package will only build the "modern" features cnid_metad and afpd, with Bonjour/Zeroconf support only.

To build the full complement of features with SLP support, build netatalk-ddp instead.

Installation

Install your finished package with pacman as usual, and remember to add "netatalk" to the daemons list in /etc/rc.conf. If using systemd, and compiled with --with-init-style=systemd, remember to systemctl enable netatalk.service.

Besides the configuration files that are installed (and checked during upgrade), netatalk may generate two files /etc/netatalk/afp_signature.conf or /opt/netatalk/afp_signature.conf which holds the system UUID, and /etc/netatalk/afp_voluuid.conf or /opt/netatalk/afp_voluuid.conf which holds volume UUIDs for TimeMachine. These files may remain after package removal and should be kept in most cases to disambiguate the services broadcast over the local network.

Netatalk-ddp Initscripts

To emulate the init functionality of the systems fully-supported by netatalk, one initscript "netatalk" is responsible for starting and stopping the individual daemons. The script checks for the binaries available on the system, and starts them in a specific order, skipping those that are already running. The stop process occurs in reverse. To prevent ambiguity, only "netatalk" registers as a daemon with the system, but is silent, it doesn't echo any messages. The individual initscripts echo to the terminal, but don't register as daemons to prevent confusion.

The individual scripts are provided for users who may want to manage the daemons at runtime or add specific arguments, but don't worry, they will obey the necessary dependencies for proper operation. If a daemon is required by others, it won't stop until its children aren't running; if a daemon has dependencies it won't start until these are met.

Configuration

Netatalk

Netatalk v3.0 now uses a single configuration file, /etc/afp.conf. Installing v3 will move any old config files (/etc/netatalk/afpd.config, /etc/netatalk/AppleVolumes.default) out of the way. Global options and volume definitions will need to be added to /etc/afp.conf. See man afp.conf for help, but here is an example:

/etc/afp.conf
[Global]
hosts allow = 192.168.1.0/16

[TimeMachine]
path = /srv/share/timemachine
valid users = joe
time machine = yes

[media]
path = /srv/share/media
valid users = joe sam

In addition, the daemons init scripts have been consolidated with this version. If you have afp, cnid, etc in you rc.conf DAEMONS list, remove then. Just netatalk should appear.

If you have issues with CNID, try rebuilding the databases. I had to remove the .AppleDB files and run dbd. This has the benefit of moving the .AppleDB files into /etc/netatalk/CNID rather than the root of the volume.

# Save the old .AppleDB files
tar -cvzf /path/to/your/volume/.AppleDB
rm -rf /path/to/your/volume/.AppleDB
# Rebuild
dbd -r /path/to/your/volume
# Wait... on a large share it can take hours

One note: avoid symbolic links the volume paths. This caused me significant headaches. Also, I was able to eliminate the uams and cnidscheme configuration options that were previously in my v2 configuration files. The (new) defaults worked well.

Netatalk-ddp

System

Edit the afpd configuration file (/etc/netatalk/afpd.conf), and add a line similar to

/etc/netatalk/afpd.conf
...
- -mimicmodel TimeCapsule6,106 -setuplog "default log_warn /var/log/afpd.log"

This tells netatalk to use the system's hostname, mimic a TimeCapsule, and log warnings and errors to file.

Volumes

Edit the volumes configuration file /etc/netatalk/AppleVolumes.default, and append the following to add a TimeMachine-like share

/etc/netatalk/AppleVolumes.default
...
<path_to_share> <sharename> allow:<username> options:usedots,upriv,tm
  • The volsizelimit:<limit_in_whole_mebibytes> argument can be useful here to limit the total space reported to TimeMachine.
  • If you wish to turn off "home" shares, change the ~ line to #~.
Warning: Avoid nesting volumes, and do not share directories by any other protocol. All file changes must be made via afpd only

IP Tables

If you use the iptables package for firewall services, consider adding the following: (replace -I with -A as necessary)

Bonjour/Zeroconf
iptables -I INPUT -p udp --dport mdns -d 224.0.0.251 -j ACCEPT
iptables -I OUTPUT -p udp --dport mdns -d 224.0.0.251 -j ACCEPT
AFP
iptables -I INPUT -p tcp --dport afpovertcp -j ACCEPT
SLP
iptables -I INPUT -p tcp --dport slp -j ACCEPT
iptables -I OUTPUT -p tcp --dport slp -j ACCEPT
iptables -I INPUT -p udp --dport slp -j ACCEPT
iptables -I OUTPUT -p udp --dport slp -j ACCEPT
AppleTalk
iptables -I INPUT -p tcp -m multiport --dport at-rtmp,at-nbp,at-echo,at-zis -j ACCEPT
iptables -I OUTPUT -p tcp -m multiport --dport at-rtmp,at-nbp,at-echo,at-zis -j ACCEPT

Enable Bonjour/Zeroconf

Bonjour/Zeroconf is now a requirement of netatalk and is compiled by default. No configuration is necessary, netatalk will register its own services using the dbus link. Make sure you set -mimicmodel to the desired string (see /System/Library/CoreServices/CoreTypes.bundle/Contents/Info.plist on a Mac for a full list).