Difference between revisions of "NetworkManager"

From ArchWiki
Jump to navigation Jump to search
Line 62: Line 62:
If after installation you get four or more instances of nm-applet running when automatically starting gnome services and you are not using a session manager, consider doing the following:
If after installation you get four or more instances of nm-applet running when automatically starting gnome services and you are not using a session manager, consider doing the following:
#Kill all nm-applet processes
#Kill all nm-applet processes
#Add {{Codeline|nm-applet --sm-disable}} to the autostarted applications
#Add {{Codeline|nm-applet --sm-disable}} to the autostarted applications (Settings->Session and Startup)
#Log out of Xfce
#Log out of Xfce
#Delete the XFCE session file (in {{Filename|~/.cache/sessions/}})
#Delete the XFCE session file (in {{Filename|~/.cache/sessions/}})

Revision as of 18:41, 24 January 2010

Template:I18n links start Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n links end

Network Manager is a set of co-operative tools that make networking simple and straightforward. Whether wireless or wired, Network Manager allows you to quickly move from one network to another: once a network has been configured and joined once, it can be detected and re-joined automatically at a later date.

Network Manager 0.7 is a major overhaul of the NetworkManager program.

Some of the new features include:

  • Support for cellular data cards
  • Multiple Active Devices
  • System-wide Configuration
  • wpa_supplicant dbus Control Interface
  • More Wireless/Wired Authentication Methods

Step 1: Installation

NetworkManager is available in the repositories:

# pacman -S networkmanager

Step 2: GUIs


network-manager-applet (formerly gnome-network-manager) is also there:

# pacman -S network-manager-applet

If no icon for nm-applet appears on one of your panels in Gnome, yet you are sure it is running, try adding a "Notification Area" to a panel.


Note: If the instructions bellow do not work, network-manager-applet is an option.


KNetworkManager is available in the extra repository. Install it like so:

# pacman -S kdeplasma-applets-networkmanager

There is new version of KNetworkManager in [kdemod-core] providing system tray icon and configuration:

# pacman -S kdemod-networkmanagement-knetworkmanager-kde4

If you get the following message from the knetworkmanager:

 Network Management disabled

try to install the cnetworkmanager from AUR, then execute the following command:

 # cnetworkmanager -o 1


You can try to use knetworkmanager which is no longer maintained in any Arch official repositories. You can get it from the AUR.


Xfce uses the same package as GNOME:

# pacman -S network-manager-applet 

You can also install xfapplet plugin, which allows GNOME applets to be displayed within the xfce4 panel:

# pacman -S xfce4-xfapplet-plugin

If after installation you get four or more instances of nm-applet running when automatically starting gnome services and you are not using a session manager, consider doing the following:

  1. Kill all nm-applet processes
  2. Add Template:Codeline to the autostarted applications (Settings->Session and Startup)
  3. Log out of Xfce
  4. Delete the XFCE session file (in Template:Filename)
  5. Log into Xfce

Fluxbox and Other WMs

You will need the hicolor theme to be able to run nm-applet:

# pacman -S network-manager-applet hicolor-icon-theme gnome-icon-theme

After configuring your system for use with NetworkManager, to autostart the NetworkManager applet, go to Settings → Autostarted Applications then add, Template:Codeline. This should start up the network manager applet on startup. The Template:Codeline option is used to prevent multiple instances of the nm-applet, and you should only need it if multiple instances are running when you startup.

  • NetworkManager seems to have trouble loading on various box-environments and compiz. By using the ck-launch-session pre-fix, nm-applet seems to work correctly.


exec ck-launch-session startlxde

Command line

cnetworkmanager, from the AUR, can be used to configure connections from the command line.

Step 3: Configuration

Disable interfaces

If you want to use NetworkManager on an interface you will have to disable it in Template:Filename. You can do this by placing a Template:Codeline in front of the interface of your choice, for example:

INTERFACES=(!eth0 !ath0)
Note: You may have to enable (i.e, remove the Template:Codeline) eth0 again afterwards for my card to work. Confirmed with ath_pci madwifi module – you may also have to re-enable the network cards for them to work.

NetworkManager parses Template:Filename to see if you want to have a static or dynamic IP on your interfaces, so state your preferred configuration there.

Example for static IP:

 eth0="eth0 netmask broadcast"

Example for dynamic IP:


Set hostname

By default NetworkManager 0.7 will do a reverse lookup of your IP to determine your hostname. Generally, this will result in "localhost" or "localhost.localdomain". It will also attempt to manipulate the hostname of the system on the fly which will occasionally break Xorg.

The solution is to create the file Template:Filename, and add the following:

plugins = keyfile
hostname = <your hostname>

Make sure you verify that Template:Filename is correct before continuing as NetworkManager may have altered it already before you had a chance to change this setting.

Edit daemons

You must disable the default network daemon and add the hal and networkmanager daemons in this order:

DAEMONS=( ... !network hal networkmanager ... )
Warning: Do not use backgrounding on hal and networkmanager daemons, as it may cause freeze of input devices at Xorg startup.
Note: If you happen to specify the fam daemon in your array, it must appear after networkmanager. The same also applies to portmap and netfs if specified.

Get in the network group

Add yourself to the network group, replacing Template:Codeline with the appropriate user name:

# gpasswd -a USERNAME network

Configure network services

There are quite a few network services that you will not want running until NetworkManager brings up an interface. Good examples are ntpd and network filesystem mounts of various types. NetworkManager can start these services when you bring an interface up, and stop them when you bring it down.

To use this feature, add scripts to /etc/NetworkManager/dispatcher.d and make them executable for all users. For security, make them owned by root:root and writable only by the owner. The scripts will be run in alphabetical order at interface up time (with arguments interface up), and in reverse alphabetical order at interface down time (with arguments interface down). To ensure what order they come up in, simply add an alphabetical character and an underscore at the front of the script name; for example, a_portmap and b_netfs (which ensures that the portmapper is up before NFS mounts are attempted).

A useful naming scheme: a_portmap b_netfs c_ntpdate d_ntpd e_cups f_clamav. Typical usage for this is running a local NTP server on a system that does not connect to foreign wireless networks, and that also employs NFS mounts. There is no point in cups if you are not on the network. Clamav's freshclam signature updater requires networking to connect.

Warning: if you connect to foreign or public networks, be aware of what services you are starting and what servers you expect to be available for them to connect to. You could make a security hole by starting the wrong services while connected to a public network.

Proxy settings

Network Manager does not directly handle proxy settings.

See: Proxy settings

PolicyKit issues

Note: Following is probably not need for KDE 4 anymore, as there should be PolicyKit integration as of KDE 4.3. At least with knetworkmanager from [kdemod-core], the author did not run into any troubles.

Because many Display Managers (including KDM) do not natively support policykit at login, you will run into some permission issues with D-Bus and NetworkManager.

While there are several options to resolve this issue, choose only one:

 session       optional        pam_ck_connector.so
Warning: This may cause the malfunction of KDE PowerDevil.
       <policy group="users">
               <allow send_destination="org.freedesktop.NetworkManager"/>
               <allow send_interface="org.freedesktop.NetworkManager"/>
If this does not work, check if there are any policy errors by starting NetworkManager manually:
 # kill `pidof NetworkManager`
 # NetworkManager --no-daemon
  • Put the following script in ~/.kde4/Autostart or similar for other WMs or DEs:


DHCP problems

If you have problems with getting an IP via DHCP try to add the following to your Template:Filename:

 interface "eth0" {
   send dhcp-client-identifier 01:aa:bb:cc:dd:ee:ff;

Where Template:Codeline is the MAC-adress of this NIC.

Problems starting nm-applet as normal user

Sometimes, the gnome applet fails to start with the following error:

** (nm-applet:2941): WARNING **: <WARN>  applet_dbus_manager_start_service(): Could not acquire the NetworkManagerUserSettings
  Message: 'Connection ":1.19" is not allowed to own the service "org.freedesktop.NetworkManagerUserSettings" due to security
policies in the configuration file'

This depends on NetworkManager changing its behaviour since version 0.7, ignoring the "network" group altogether and instead uses ConsoleKit, which seems to be problematic at times. This solution was provided by madhatter:

Edit your /etc/dbus-1/system.d/NetworkManager.conf to read:

<!DOCTYPE busconfig PUBLIC
 "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
        <policy user="root">
                <allow own="org.freedesktop.NetworkManager"/>
                <allow send_destination="org.freedesktop.NetworkManager"/>
                <allow send_interface="org.freedesktop.NetworkManager"/>

        <allow own="org.freedesktop.NetworkManager.PPP"/>
                <allow send_destination="org.freedesktop.NetworkManager.PPP"/>
                <allow send_interface="org.freedesktop.NetworkManager.PPP"/>
        <policy group="network">
                <allow send_destination="org.freedesktop.NetworkManager"/>
                <allow send_interface="org.freedesktop.NetworkManager"/>
        <policy at_console="true">
                <allow send_destination="org.freedesktop.NetworkManager"/>
                <allow send_interface="org.freedesktop.NetworkManager"/>
        <policy context="default">
                <deny own="org.freedesktop.NetworkManager"/>
                <deny send_destination="org.freedesktop.NetworkManager"/>
                <deny send_interface="org.freedesktop.NetworkManager"/>

                <deny own="org.freedesktop.NetworkManager.PPP"/>
                <deny send_destination="org.freedesktop.NetworkManager.PPP"/>
                <deny send_interface="org.freedesktop.NetworkManager.PPP"/>

        <limit name="max_replies_per_connection">512</limit>

Also, change your /etc/dbus-1/system.d/nm-applet.conf to read:

<!DOCTYPE busconfig PUBLIC
 "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
    <policy user="root">
        <allow own="org.freedesktop.NetworkManagerUserSettings"/>

        <allow send_destination="org.freedesktop.NetworkManagerUserSettings"/>
        <allow send_interface="org.freedesktop.NetworkManagerSettings"/>

        <allow send_interface="org.freedesktop.NetworkManagerSettings.Secrets"/>
    <policy group="network">
        <allow own="org.freedesktop.NetworkManagerUserSettings"/>
        <allow send_destination="org.freedesktop.NetworkManagerUserSettings"/>
        <allow send_interface="org.freedesktop.NetworkManagerUserSettings"/>

        <deny send_interface="org.freedesktop.NetworkManagerSettings.Secrets"/>
    <policy at_console="true">
        <allow own="org.freedesktop.NetworkManagerUserSettings"/>

        <allow send_destination="org.freedesktop.NetworkManagerUserSettings"/>
        <allow send_interface="org.freedesktop.NetworkManagerSettings"/>

        <deny send_interface="org.freedesktop.NetworkManagerSettings.Secrets"/>
    <policy context="default">
        <deny own="org.freedesktop.NetworkManagerUserSettings"/>

        <allow send_destination="org.freedesktop.NetworkManagerUserSettings"/>
        <allow send_interface="org.freedesktop.NetworkManagerSettings"/>
        <deny send_interface="org.freedesktop.NetworkManagerSettings.Secrets"/>

    <limit name="max_replies_per_connection">512</limit>

For OpenVpn you need to add following line in Template:Filename

<allow send_destination="org.freedesktop.NetworkManager" />
<allow send_interface="org.freedesktop.NetworkManager.openvpn"/>

in section Template:Codeline.

Missing default route

On at least one KDE4 system, no default route was created when establishing wireless connections with NetworkManager. Changing the route settings of the wireless connection to remove the default selection "Use only for resources on this connection" solved the issue.

Tips and tricks

Checking if networking is up inside a cron job or script

Some cron jobs require networking to be up to succeed. You may wish to avoid running these jobs when the network is down. To accomplish this, add an if test for networking that queries NetworkManager's nm-tool and checks the state of networking. The test shown here succeeds if any interface is up, and fails if they are all down. This is convenient for laptops that might be hardwired, might be on wireless, or might be off the network.

if [ `nm-tool|grep State|cut -f2 -d' '` == "connected" ]; then
       #Whatever you want to do if the network is online
       #Whatever you want to do if the network is offline - note, this and the else above are optional

This useful for a cron.hourly script that runs fpupdate for the F-Prot virus scanner signature update, as an example. Another way it might be useful, with a little modification, is to differentiate between networks using various parts of the output from nm-tool; for example, since the active wireless network is denoted with an asterisk, you could grep for the network name and then grep for a literal asterisk.

Automatically unlock keyring after login

This will prevent nm-applet from asking for your keyring password.

  • In Template:Filename (or your corresponding daemon in /etc/pam.d), add these lines at the end of the "auth" and "session" blocks if they do not exist already:
 auth            optional        pam_gnome_keyring.so
 session         optional        pam_gnome_keyring.so  auto_start
 password    optional    pam_gnome_keyring.so
Next time you log in, you should be asked if you want the password to be unlocked automatically on login.
Note: See http://live.gnome.org/GnomeKeyring/Pam for reference, and if you are using kde / kdm, you can use pam-keyring-tool from the AUR.
  • Put a script like the following in ~/.kde4/Autostart:
 echo PASSWORD | /usr/bin/pam-keyring-tool --unlock --keyring=default -s
Similar should work with openbox, lxde, etc.

Automatically connect on boot

Since version 0.7 the NetworkManager is able to connect on boot, before a user has logged in and unlocked the keyring.

  • First make sure that the keyfile plugin is loaded; Template:Filename should look like this:
  • If this was not in the file before, you have to restart nm-system-settings:
 # killall -TERM nm-system-settings
or simply reboot.
  • Now grant your user the right to modify system-connections with:
 $ sudo polkit-auth --grant org.freedesktop.network-manager-settings.system.modify --user "YOURUSERNAME"
Finally, in the connection-editor, check the Available to all users box.

The connection is now saved in /etc/NetworkManager/system-connections/"CONNECTION NAME". On reboot, NetworkManager will try to connect to it, when in range.

Ignore specific devices

Sometimes it is desired, that network manager ignores some devices and do not try to get an IP.

  • First you have to find out the Hal UDI (e.g. with lshal):
 info.product = 'Networking Interface'  (string)
 info.subsystem = 'net'  (string)
 info.udi = '/org/freedesktop/Hal/devices/net_00_1f_11_01_06_55'  (string)
 linux.hotplug_type = 2  (0x2)  (int)
 linux.subsystem = 'net'  (string)
  • Add the udi to /etc/NetworkManager/nm-system-settings.conf:
Multiple devices can be specified, delimited by a semicolon:

You do not need restarting networkmanager for the changes to take effect.

See also