Difference between revisions of "Nftables"

From ArchWiki
Jump to navigation Jump to search
Line 212: Line 212:
 
The following is an incomplete list of jumps:
 
The following is an incomplete list of jumps:
 
*accept  (accept a packet)
 
*accept  (accept a packet)
*reject  (reject a packet)
+
*reject  (reject a packet) (deprecated in v0.4, use drop instead)
 
*drop    (drop a packet)
 
*drop    (drop a packet)
 
*snat    (perform source NAT on a packet)
 
*snat    (perform source NAT on a packet)

Revision as of 13:27, 28 December 2014

Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: nftables is an entirely new utility, and lacks sufficient documentation on this wiki. (Discuss in Talk:Nftables#)

nftables is a netfilter project that aims to replace the existing ip-, ip6-, arp-, and ebtables framework. It provides a new packet filtering framework, a new user-space utility (nft), and a compatibility layer for ip- and ip6tables. It uses the existing hooks, connection tracking system, user-space queueing component, and logging subsystem of netfilter.

You can also visit the official nftables wiki page for more information.

The first release is available in Linux 3.13, which is in the core repository (linux), and nftables (the user-space components) is available in the extra repository (nftables), and on the AUR in package nftables-gitAUR.

Overview

nftables consists of three main components: a kernel implementation, the libnl netlink communication and the nftables user-space front-end. The kernel provides a netlink configuration interface, as well as run-time rule-set evaluation using a small classification language interpreter. libnl contains the low-level functions for communicating with the kernel; the nftables front-end is what the user interacts with.

nft

nftables' user-space utility nft now performs most of the rule-set evaluation before handing rule-sets to the kernel. Because of this, nftables provides no default tables or chains; although, a user can emulate an iptables-like setup.

It works in a fashion similar to ifconfig or iproute2. The commands are a long, structured sequence rather than using argument switches like in iptables. For example:

nft add rule ip6 filter input ip6 saddr ::1 accept

add is the command. rule is a subcommand of add. ip6 is an argument of rule, telling it to use the ip6 family. filter and input are arguments of rule specifying the table and chain to use, respectively. The rest that follows is a rule definition, which includes matches (ip), their parameters (saddr), parameter arguments (::1), and jumps (accept).

The following is an incomplete list of the commands available in nft:

list
  tables [family]
  table [family] <name>
  chain [family] <table> <name>

add
  table [family] <name>
  chain [family] <table> <name> [chain definitions]
  rule [family] <table> <chain> <rule definition>

table [family] <name> (shortcut for `add table`)

insert
  rule [family] <table> <chain> <rule definition>

delete
  table [family] <name>
  chain [family] <table> <name>
  rule [family] <table> <handle>

flush
  table [family] <name>
  chain [family] <table> <name>

family is optional, but it will default to ip.

Tables

The purpose of tables is to hold chains. Unlike tables in iptables, there are no built-in tables in nftables. Tables can have one of five families specified, which unifies the various iptables utilities into one:

nftables family iptables utility
ip iptables
ip6 ip6tables
inet iptables and ip6tables
arp arptables
bridge ebtables

ip is the default family. inet requires Linux >=3.15 and allows for the unification of the ip and ip6 families to make defining rules for both easier.

Listing

You can list the current tables in a family with the nft list command.

# nft list tables
# nft list tables ip6

You can list a full table definition by specifying a table name:

# nft list table foo
# nft list table ip6 foo

Creation

Tables can be added via two commands — one just being a shortcut for the other. Here is an example of how to add an ip table called foo and an ip6 table called foo:

# nft add table foo
# nft table ip6 foo

You can have two tables with the same name as long as they are in different families.

Deletion

Tables can only be deleted if there are no chains in them.

# nft delete table foo
# nft delete table ip6 foo

Chains

The purpose of chains is to hold rules. Unlike chains in iptables, there are no built-in chains in nftables. This means that if no chain uses any types or hooks in the netfilter framework, packets that would flow through those chains will not be touched by nftables, unlike iptables.

Listing

The nft list table foo command will list all the chains in the foo table. You can also list rules from an individual chain.

# nft list chain foo bar
# nft list chain ip6 foo bar

These commands will list the bar chains in the ip and ip6 foo tables.

Creation

Chains can be added when a table is created in a file definition or one at time via the nft add chain command.

# nft add chain foo bar
# nft add chain ip6 foo bar

These commands will add a chain called bar to the ip and ip6 foo tables.

Properties

Because nftables has no built-in chains, it allows chains to access certain features of the netfilter framework.

# nft add chain filter input { type filter hook input priority 0\; }

This command tells nftables to add a chain called input to the filter table and defines its type, hook, and priority. These properties essentially replace the built-in tables and chains in iptables.

Types

There are three types a chain can have and they correspond to the tables used in iptables:

  • filter
  • nat
  • route (mangle)
Hooks

There are five hooks a chain can use and they correspond to the chains used in iptables:

  • input
  • output
  • forward
  • prerouting
  • postrouting
Priorities
Note: Priorities do not currently appear to have any effect on which chain sees packets first.
Note: Since the priority seems to be an unsigned integer, negative priorities will be converted into very high priorities.

Priorities tell nftables which chains packets should pass through first. They are integers, and the higher the integer, the higher the priority.

Deletion

Chains can only be deleted if there are no rules in them.

# nft delete chain foo bar
# nft delete chain ip6 foo bar

These commands delete the bar chains from the ip and ip6 foo tables.

Rules

The purpose of rules is to identify packets (match) and carry out tasks (jump). Like in iptables, there are various matches and jumps available, though not all of them are feature-complete in nftables.

Listing

You can list the current rules in a table with the nft list command, using the same method as listing a table. You can also list rules from an individual chain.

# nft list chain foo bar
# nft list chain ip6 foo bar

These commands will list the rules in the bar chains in the ip and ip6 foo tables.

Creation

Rules can be added when a table is created in a file definition or one at time via the nft add rule command.

# nft add rule foo bar ip saddr 127.0.0.1 accept
# nft add rule ip6 foo bar ip saddr ::1 accept

These commands will add a rule to the bar chains in the ip and ip6 foo tables that matches an ip packet when its saddr (source address) is 127.0.0.1 (IPv4) or ::1 (IPv6) and accepts those packets.

Matches

There are various matches available in nftables and, for the most part, coincide with their iptables counterparts. The most noticeable difference is that there are no generic or implicit matches anymore. A generic match was one that was always available, such as --protocol or --source. Implicit matches were protocol-specific, such as --sport when a packet was determined to be TCP.

The following is an incomplete list of the matches available:

  • meta (meta properties, e.g. interfaces)
  • icmp (ICMP protocol)
  • icmpv6 (ICMPv6 protocol)
  • ip (IP protocol)
  • ip6 (IPv6 protocol)
  • tcp (TCP protocol)
  • udp (UDP protocol)
  • sctp (SCTP protocol)
  • ct (connection tracking)

The following is an incomplete list of match arguments (for a more complete list, see man 8 nft):

meta:
  oif <output interface INDEX>
  iif <input interface INDEX>
  oifname <output interface NAME>
  iifname <input interface NAME>

  (oif and iif accept string arguments and are converted to interface indexes)
  (oifname and iifname are more dynamic, but slower because of string matching)

icmp:
  type <icmp type>

icmpv6:
  type <icmpv6 type>

ip:
  protocol <protocol>
  daddr <destination address>
  saddr <source address>

ip6:
  daddr <destination address>
  saddr <source address>

tcp:
  dport <destination port>
  sport <source port>

udp:
  dport <destination port>
  sport <source port>

sctp:
  dport <destination port>
  sport <source port>

ct:
  state <new | established | related | invalid>

Jumps

Jumps work the same as they do in iptables, except multiple jumps can now be used in one rule.

# nft add rule filter input tcp dport 22 log accept

The following is an incomplete list of jumps:

  • accept (accept a packet)
  • reject (reject a packet) (deprecated in v0.4, use drop instead)
  • drop (drop a packet)
  • snat (perform source NAT on a packet)
  • dnat (perform destination NAT on a packet)
  • log (log a packet)
  • counter (keep a counter on a packet; counters are optional in nftables)
  • return (stop traversing the chain)
  • jump <chain> (jump to another chain)
  • goto <chain> (jump to another chain, but don't return)

Insertion

Rules can be prepended to chains with the nft insert rule command.

# nft insert rule filter input ct state established,related accept

Deletion

Individual rules can only be deleted by their handles. The nft --handle list command must be used to determine rule handles. Note the --handle switch, which tells nft to list handles in its output.

The following determines the handle for a rule and then deletes it. The --number argument is useful for viewing some numeric output, like unresolved IP addresses.

# nft --handle --numeric list chain filter input
table ip filter {
     chain input {
          type filter hook input priority 0;
          ip saddr 127.0.0.1 accept # handle 10
     }
}
# nft delete rule filter input handle 10

All the chains in a table can be flushed with the nft flush table command. Individual chains can be flushed using either the nft flush chain or nft delete rule commands.

# nft flush table foo
# nft flush chain foo bar
# nft delete rule ip6 foo bar

The first command flushes all of the chains in the ip foo table. The second flushes the bar chain in the ip foo table. The third deletes all of the rules in bar chain in the ip6 foo table.

Atomic Reloading

Flush the current ruleset :

# echo "flush ruleset" > /tmp/nftables 

Dump the current ruleset:

# nft list ruleset >> /tmp/nftables

Now you can edit /tmp/nftables and apply your changes with:

# nft -f /tmp/nftables

File Definitions

File definitions can be used by the nft -f command, which acts like the iptables-restore command. However, unlike iptables-restore, this command does not flush out your existing ruleset, to do so you have to prepend the flush command.

/etc/nftables/filter.rules
flush table ip filter
table ip filter {
     chain input {
          type filter hook input priority 0;
          ct state established,related accept
          ip saddr 127.0.0.1 accept
          tcp dport 22 log accept
          reject
     }
}

To export your rules (like iptables-save):

# nft list ruleset

Getting Started

To get an iptables-like chain set up, you will first need to use the provided IPv4 filter file:

# nft -f /etc/nftables/ipv4-filter

To list the resulting chain:

# nft list table filter

Drop output to a destination:

# nft add rule ip filter output ip daddr 1.2.3.4 drop

Drop packets destined for local port 80:

# nft add rule ip filter input tcp dport 80 drop

Delete all rules in a chain:

# nft delete rule filter output

Samples

Simple IP/IPv6 Firewall

firewall.rules
# A simple firewall

table firewall {
  chain incoming {
    type filter hook input priority 0;

    # established/related connections
    ct state established,related accept

    # invalid connections
    ct state invalid drop

    # loopback interface
    iifname lo accept

    # icmp
    ip protocol icmp accept

    # open tcp ports: sshd (22), httpd (80)
    tcp dport {ssh, http} accept

    # everything else
    reject
  }
}

table ip6 firewall {
  chain incoming {
    type filter hook input priority 0;

    # established/related connections
    ct state established,related accept

    # invalid connections
    ct state invalid drop

    # loopback interface
    iifname lo accept

    # icmp
    ip6 nexthdr icmpv6 accept

    # open tcp ports: sshd (22), httpd (80)
    tcp dport {ssh, http} accept

    # everything else
    reject
  }
}

Limit rate and tcp flags IP/IPv6 Firewall

firewall.2.rules
table firewall {
    chain incoming {
        type filter hook input priority 0;

        # bad tcp -> avoid network scanning:
        tcp flags & (fin|syn) == (fin|syn)			drop
        tcp flags & (syn|rst) == (syn|rst)			drop
        tcp flags & (fin|syn|rst|psh|ack|urg) < (fin)		drop # == 0 would be better, not supported yet.
        tcp flags & (fin|syn|rst|psh|ack|urg) == (fin|psh|urg)	drop

        # no ping floods:
        ip protocol icmp limit rate 10/second accept
        ip protocol icmp drop

        ct state established,related accept
        ct state invalid drop

        iifname lo accept

	# avoid brute force on ssh:
        tcp dport ssh limit rate 15/minute accept

        reject
    }
}

table ip6 firewall {
    chain incoming {
        type filter hook input priority 0;

        # bad tcp:
        tcp flags & (fin|syn) == (fin|syn)			drop
        tcp flags & (syn|rst) == (syn|rst)			drop
        tcp flags & (fin|syn|rst|psh|ack|urg) < (fin)		drop # == 0 would be better, not supported yet.
        tcp flags & (fin|syn|rst|psh|ack|urg) == (fin|psh|urg)	drop

        # no ping floods:
        ip6 nexthdr icmpv6 limit rate 10/second accept
        ip6 nexthdr icmpv6 drop

        ct state established,related accept
        ct state invalid drop

        # loopback interface
        iifname lo accept

	# avoid brute force on ssh:
        tcp dport ssh limit rate 15/minute accept

        reject
    }
}

Jump

When using jumps in config file, it is necessary to define the target chain first. Otherwise one could end up with Error: Could not process rule: No such file or directory.

jump.rules
table inet filter {
    chain web {
        tcp dport http accept
        tcp dport 8080 accept
    }
    chain input {
        type filter hook input priority 0;
        ip saddr 10.0.2.0/24 jump web
        drop
    }
}

Loading rules at boot

To automatically load rules on system boot, simply enable the nftables systemd service by executing systemctl enable nftables

Note: You may have to create /etc/modules-load.d/nftables.conf with all of the nftables related modules you require as entries for the systemd service to work correctly. You can get a list of modules using this command:
lsmod | grep nf
Otheriwse, you could end up with the dreaded Error: Could not process rule: No such file or directory error.

Logging to Syslog

If you use a Linux kernel < 3.17, you have to modprobe xt_LOG to enable logging.

See also