Difference between revisions of "Nouveau"

From ArchWiki
Jump to: navigation, search
(Configuration)
(Alternative installation)
Line 74: Line 74:
 
<small>You can also look at the [[Intel]] instructions for an early start: [[Intel#KMS_.28Kernel_Mode_Setting.29|Intel Graphics:KMS (Kernel Mode Setting)]]</small>
 
<small>You can also look at the [[Intel]] instructions for an early start: [[Intel#KMS_.28Kernel_Mode_Setting.29|Intel Graphics:KMS (Kernel Mode Setting)]]</small>
  
==Alternative installation==
+
==Alternative installation [latest Mesa]==
If the official Arch Linux packages do not work, you can try a more current video driver from the [[AUR]]: {{Package AUR|xf86-video-nouveau-git}}.  A more up-to-date DRM module can be built by using the {{Package Official|nouveau-drm}} PKGBUILD from [[Arch Build System|ABS]].  Simply update {{Codeline|_snapdate}} to the current date, and modify the {{Codeline|sources}} array to read:
+
source=(# ftp://ftp.archlinux.org/other/$pkgname/master-${_snapdate}.tar.gz
+
        http://people.freedesktop.org/~pq/nouveau-drm/master.tar.gz
+
        # get the Makefile from http://cgit.freedesktop.org/nouveau/linux-2.6/plain/nouveau/Makefile?h=master-compat
+
        Makefile)
+
  
You can use {{Package AUR|kernel26-nouveau-git}} to compile the nouveau project's kernel tree, which already includes the necessary modules. This is the method recommended by upstream.
+
You may install the latest -git packages, through AUR. You can use [http://aur.archlinux.org/packages.php?ID=8266 mesa-git] which will allow the installation of the latest Mesa.
 +
 
 +
You can also try installing a newer kernel version, through packages like [http://aur.archlinux.org/packages.php?ID=39965 kernel26-mainline] in which the Nouveau DRM code would allow better performance.
  
 
==DualHead==
 
==DualHead==

Revision as of 18:26, 19 April 2011

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.


Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어


External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary end

Nouveau is an open source graphic driver for NVIDIA cards. Do not forget to check out the FAQ if you have any questions, as there is a lot of valuable information there.

Installation

Before proceeding, have a look at the FeatureMatrix to see what features are supported for a given architecture, and the list of codenames to determine the card's category.

You could also consult wikipedia for a even more detailed list.

Install the following packages:

# pacman -S xf86-video-nouveau libdrm mesa nouveau-dri

Also make sure you have Xorg properly installed.

Warning: 3D acceleration is still not officially supported, so don't report any bugs unless you are looking to contribute patches.

Loading

If you kept the proprietary nvidia driver installed, nouveau is probably not going to work. Either uninstall nvidia or blacklist it by adding the following line to /etc/modprobe.d/modprobe.conf

blacklist nvidia

Then nouveau should load fine automatically on next reboot. To test it now, first make sure nvidia is no longer loaded

# rmmod nvidia

Then load nouveau

# modprobe nouveau

And check that it loaded fine by looking at kernel messages

$ dmesg

You can use those scripts if you are switching between open and closed drivers often.

Configuration

Create the file Template:Filename, and input the following contents:

Section "Device"
    Identifier "Nvidia"
    Driver "nouveau"
EndSection

This is required to ensure that nouveau driver is loaded. Xorg does not yet automatically load the xf86-video-nouveau driver.

KMS

Kernel Mode-Setting (KMS) is required by the Nouveau driver. See the KernelModeSetting page for more information.

Late start

With this choice, KMS will be enabled when the boot process says, "Loading modules." This may cause an undesirable screen flicker as the mode changes.

Remove all "vga=" options from your kernel commandline in Template:Filename. Using other framebuffer drivers (such as uvesafb) will conflict with KMS.

Early start

Warning: If you have troubles with nouveau, and are led to rebuild nouveau-drm several times for testing purpose, do not add nouveau to the initramfs. It is too easy to forget to rebuild the initramfs and it will just make any testing harder. Just use late start. There might be additional problems with initramfs if you need a firmware for the nv50 family

This method will start KMS as early as possible in the boot process, when the initramfs is loaded. Here is how to do this with the official packages:

1) Add "nouveau" to the MODULES array in Template:Filename:

MODULES="nouveau ..."

2) Add "/etc/modprobe.d/modprobe.conf" to the FILES section in Template:Filename:

FILES="/etc/modprobe.d/modprobe.conf"

3) Re-generate your initcpio:

# mkinitcpio -p <your kernel preset (kernel26, etc.)>

You can also look at the Intel instructions for an early start: Intel Graphics:KMS (Kernel Mode Setting)

Alternative installation [latest Mesa]

You may install the latest -git packages, through AUR. You can use mesa-git which will allow the installation of the latest Mesa.

You can also try installing a newer kernel version, through packages like kernel26-mainline in which the Nouveau DRM code would allow better performance.

DualHead

Nouveau supports the xrandr extension for modesetting and multiple monitors. See the RandR12 page for tutorials.

Here is a full sample Template:Filename above for running 2 monitors in dual head mode. You may prefer to use a graphical tool to configure monitors like gnome-display-properties (System -> Preferences -> Display).

# the right one
Section "Monitor"
          Identifier   "NEC"
          Option "PreferredMode" "1280x1024_60.00"
EndSection

# the left one
Section "Monitor"
          Identifier   "FUS"
          Option "PreferredMode" "1280x1024_60.00"
          Option "LeftOf" "NEC"
EndSection

Section "Device"
    Identifier "nvidia card"
    Driver "nouveau"
    Option  "Monitor-DVI-I-0" "NEC"
    Option  "Monitor-DVI-I-1" "FUS"
EndSection

Section "Screen"
    Identifier "screen1"
    DefaultDepth 24
      SubSection "Display"
       Depth      24
       Virtual 2560 1024
      EndSubSection
    Device "nvidia card"
EndSection

Section "ServerLayout"
    Identifier "layout1"
    Screen "screen1"
EndSection

Setting console resolution

Use the Template:Package Official tool to adjust console resolution.

You can also pass the resolution to nouveau with the video= kernel line option (see KMS).