Difference between revisions of "Ntop"

From ArchWiki
Jump to: navigation, search
m (Please enable make sure that the ntop html/ directory is properly installed)
m (change -w3c option to --w3c (see man ntop))
Line 11: Line 11:
 
{{hc|/etc/conf.d/ntop|<nowiki>
 
{{hc|/etc/conf.d/ntop|<nowiki>
 
# Parameters to be passed to ntop.
 
# Parameters to be passed to ntop.
NTOP_ARGS="-K -W 2323 -i enp1s0,wlp2s0 -M -s -4 -6 -s -u ntop -c -r 30 -w3c -t 3 -a /var/log/ntop/http.log -O /var/log/ntop/ -q --skip-version-check 0"
+
NTOP_ARGS="-K -W 2323 -i enp1s0,wlp2s0 -M -s -4 -6 -s -u ntop -c -r 30 --w3c -t 3 -a /var/log/ntop/http.log -O /var/log/ntop/ -q --skip-version-check 0"
  
 
# Location of the log file.
 
# Location of the log file.

Revision as of 13:26, 26 October 2013

Ntop is a network traffic probe based on libcap, that offers RMON-like network traffic statistics accessible via a web browser.

Installation and configuration

Install ntop from the official repositories. The first run of ntop, you must set the admin password:

# ntop

Next, you need to edit the configuration file (/etc/conf.d/ntop) to adapt on your needs. Below is an example configuration, with the focus on the host to get as much as information from the hosts connections:

/etc/conf.d/ntop
# Parameters to be passed to ntop.
NTOP_ARGS="-K -W 2323 -i enp1s0,wlp2s0 -M -s -4 -6 -s -u ntop -c -r 30 --w3c -t 3 -a /var/log/ntop/http.log -O /var/log/ntop/ -q --skip-version-check 0"

# Location of the log file.
NTOP_LOG="/var/log/ntop/ntop.log"

Start the ntop systemd service and if you want to start ntop at boot, enable it.

Tips and tricks

Web interface

To access ntop's web interface, enter http://127.0.0.1:3000/ into your web browser. To make changes to the server, you will need to enter your username (default = admin) and password.

If ntop is not just used locally on your machine, but network wide by multiple users, you'd be better off by allowing SSL connections (https) only.

# ntop -w 4223

Additional paramethers are allowed. Now direct our browser to https://127.0.0.1:4223/.

You can also provide ntop with your own SSL certificate. Simply put it in ntop's config directory and name it ntop-cert.pem

# cd /etc/ntop/
# openssl req -x509 -nodes -days 365 
  \-subj '/C=US/L=Portland/CN=swim' 
  \-newkey rsa:1024 -keyout ntop-cert.pem -out ntop-cert.pem

Group and user

In order that the -u parameter is able to work properly and to secure your ntop setup a bit more, you should create an own group and user for it.

# useradd -M -s /sbin/nologin ntop
# passwd -l ntop
Note: The passwd command here is optional, but recommended, as it will render the system more secure regarding your sshd.

Troubleshooting

**ERROR** RRD: Disabled - unable to create base directory (err 13, /var/lib/ntop/rrd)

Directory /var/lib/ntop/rrd/ may not exist. Create it and make sure it belongs to user nobody.

Please enable make sure that the ntop html/ directory is properly installed

If you receive this warning while trying to access the web interface, edit /etc/conf.d/ntop to include your IP and restart the daemon. For example:

NTOP_ARGS="-i enp1s0 -w 127.0.0.1:3000"

This is the IP you will use to access the web interface.