OpenLDAP, LDAP & Directory services are an enormous topic. Configuration is therefore complex. This page is a starting point for a basic OpenLDAP installation and a sanity check.
If you are totally new to those concepts, this is an good introduction that is easy to understand and that will get you started, even if you are new to everything LDAP.
- 1 Installation
- 2 Configuration
- 3 Next Steps
- 4 Troubleshooting
- 5 See Also
OpenLDAP contains both a LDAP server and client. Install it with the package official repositories., available in the
First prepare the run directory:
# mkdir /run/openldap # chown ldap:ldap /run/openldap
Now prepare the database directory. You will need to copy the default config file and set the proper ownership.
# cp /etc/openldap/DB_CONFIG.example /var/lib/openldap/openldap-data/DB_CONFIG # chown ldap:ldap /var/lib/openldap/openldap-data/DB_CONFIG
Next we prepare the server configuration file:
Edit the suffix and rootdn. The suffix typically is your domain name but it does not have to be. It depends on how you use your directory. We will use example for the domain name, and com for the tld. The rootdn is your LDAP administrator's name (we'll use root here).
suffix "dc=example,dc=com" rootdn "cn=root,dc=example,dc=com"
Now we delete the default root password and create a strong one:
# sed -i "/rootpw/ d" slapd.conf #find the line with rootpw and delete it # echo "rootpw $(slappasswd)" >> slapd.conf #add a line which includes the hashed password output from slappasswd
It can be useful to add some typically used schemas to the top of
include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/inetorgperson.schema include /etc/openldap/schema/nis.schema
LDAP won't find things unless you index them. Read the LDAP documentation for details, you can use the following to start with. Add them to
index uid pres,eq index mail pres,sub,eq index cn pres,sub,eq index sn pres,sub,eq index dc eq
Finally you can start the slapd daemon with
slapd.service using systemd.
Very important, you define here on which port the server should listen and if you want to use SSL, you will want to use the ldaps:// URI instead of the default ldap:// You can also specify additional slapd options here.
The client is usually not such a big deal, just keep in mind that your apps that require LDAP auth use it, so if something goes wrong with LDAP, do not waste your time with the app, start debugging the client instead.
The client config file is located at /etc/openldap/ldap.conf It is actually very simple.
If you decide to use SSL:
- The protocol (ldap or ldaps) in the URI entry has to conform with the slapd configuration
- If you decide to use self-signed certificates, you have to add them to TLS_CACERT
Test your new OpenLDAP installation
This is easy, just run the command below:
ldapsearch -x -b "" -s base '(objectclass=*)' namingContexts
Or more explicitly using the example configuration we had above:
ldapsearch -v -W -D "cn=root,dc=example,dc=com" -b "" -x -s base '(objectclass=*)' namingContexts
Now you should see some information about your database.
OpenLDAP over TLS
If you access the Openldap server over the network and especially if you have sensitive data stored on the server you run the risk of someone sniffing your data which is sent clear-text. The next part will guide you on how to setup an SSL connection between the LDAP server and the client so the data will be sent encrypted.
In order to use TLS, we must first create a certificate. You can have a certificate signed, or create your own Certificate Authority (CA), but for our purposed, a self-signed certificate will suffice.
Create a self-signed certificate
To create a self-signed certificate, type the following:
openssl req -new -x509 -nodes -out slapdcert.pem -keyout slapdkey.pem -days 365
You will be prompted for information about your LDAP server. Much of the information can be left blank. The most important information is the common name. This must be set to the DNS name of your LDAP server. If your LDAP server's IP address resolves to example.org but its server certificate shows a CN of bad.example.org, LDAP clients will reject the certificate and will be unable to negotiate TLS connections (apparently the results are wholly unpredictable).
Now that the certificate files have been created copy them to
/etc/openldap/ssl/ (if this directory doesn't exist create it) and secure them.
IMPORTANT: slapdcert.pem must be world readable because it contains the public key. slapdkey.pem on the other hand should only be readable for the ldap user for security reasons:
cp slapdcert.pem slapdkey.pem /etc/openldap/ssl/ chown ldap slapdkey.pem chmod 400 slapdkey.pem chmod 444 slapdcert.pem
Configure slapd for SSL
Edit the daemon configuration file (
/etc/openldap/slapd.conf) to tell LDAP where the certificate files reside by adding the following lines:
# Certificate/SSL Section TLSCipherSuite HIGH:MEDIUM:+SSLv2 TLSCertificateFile /etc/openldap/ssl/slapdcert.pem TLSCertificateKeyFile /etc/openldap/ssl/slapdkey.pem
The TLSCipherSuite specifies a list of OpenSSL ciphers from which slapd will choose when negotiating TLS connections, in decreasing order of preference. In addition to those specific ciphers, you can use any of the wildcards supported by OpenSSL. NOTE: HIGH, MEDIUM, and +SSLv2 are all wildcards.
Start slapd with SSL
In order to tell OpenLDAP to start using encryption, edit /etc/conf.d/slapd, uncomment the SLAPD_SERVICES line and set it to the following:
Localhost connections don't need to use SSL so you can use this instead:
IMPORTANT: If you created a self-signed certificate above be sure to add the following line to /etc/openldap/ldap.conf or you won't be able connect to the server to test it:
Finally restart the server.
You now have a basic ldap installation. The step is to design your directory. The design is heavily dependent on what you are using it for. If you are new to ldap, consider starting with a directory design recommended by the specific client services that will use the directory (PAM, Postfix, etc).
A directory for system authentication is the LDAP Authentication article.
If you notice that slapd seems to start but then stops, you may have a permission issue with the ldap datadir. Try running:
# chown ldap:ldap /var/lib/openldap/openldap-data/*
to allow slapd write access to its data directory as the user "ldap"