Difference between revisions of "OwnCloud"

From ArchWiki
Jump to: navigation, search
(Changed case of MDB2 as mdb2 didn't work)
(Installation)
Line 7: Line 7:
 
== Installation ==
 
== Installation ==
  
{{AUR|owncloud}} is available in the [[AUR]].
+
{{AUR|owncloud}} is available in the [[https://www.archlinux.org/packages/?q=owncloud community]] and [https://aur.archlinux.org/packages.php?K=owncloud&O=0 AUR].
 
Set up the [[LAMP]] stack.  
 
Set up the [[LAMP]] stack.  
 
You will probably need to install the MDB2 pear package as well: install {{pkg|php-pear}}
 
You will probably need to install the MDB2 pear package as well: install {{pkg|php-pear}}

Revision as of 12:44, 15 January 2014

From Wikipedia:

ownCloud is a software suite that provides a location-independent storage area for data (cloud storage).

Installation

owncloudAUR is available in the [community] and AUR. Set up the LAMP stack. You will probably need to install the MDB2 pear package as well: install php-pear then

 # pear install MDB2
  1. Install owncloudAUR. For installing AUR-packages see: AUR wiki page.
  2. Copy /etc/webapps/owncloud/apache.example.conf to /etc/httpd/conf/extra/owncloud.conf (version 6+)
  3. Add the following lines into /etc/httpd/conf/httpd.conf (the php5 line should have already been added during the LAMP stack setup):
 Include /etc/httpd/conf/extra/owncloud.conf
 LoadModule php5_module modules/libphp5.so
 Include conf/extra/php5_module.conf

Uncomment extensions in /etc/php/php.ini:

 gd.so
 intl.so
 openssl.so
 xmlrpc.so
 zip.so
 iconv.so

Database support

Depending on which database backend you are going to use uncomment either one of the following extensions in /etc/php/php.ini:

SQLite MySQL PostgreSQL
 sqlite.so
 sqlite3.so
 pdo_sqlite.so
 mysql.so
 mysqli.so
 pdo_mysql.so
 pgsql.so
 pdo_pgsql.so

Don't forget to install the appropriate php-module for the database. In the PostgreSQL case thats php-pgsql or for SQLite php-sqlite.

Exif support

Additionally install exif support with

 # pacman -S exiv2

and uncomment the exif.so extension in php.ini

Disable Webdav

Owncloud comes with its own Webdav enabled which conflict. Owncloud recommends to disable mod_dav and mod_dav_fs. This should be done in /etc/httpd/conf/httpd.conf

Now restart httpd (Apache)

 # systemctl restart httpd

Open http://localhost in your browser. You should now be able to create a user account and follow the installation wizard.

Custom configurations

Filesize limitations

With the default configuration ownCloud only allows the upload of filesizes less than 2MB. This can be changed by changing the following line in /etc/php/php.ini to your liking.

As of version 4.0 this is no longer necessary! The maximum upload size is now set via the ownCloud gui

 upload_max_filesize = 2M

As of version 4.5, upload limits are set in /usr/share/webapps/owncloud/.htaccess. This won't work if PHP is set up to run as CGI, so you need to change the limits in /etc/php/php.ini. You also need to change open_basedir.

upload_max_filesize = 512M
post_max_size = 512M
memory_limit = 512M
open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/

Running ownCloud in a subdirectory

By including the default owncloud.conf in httpd.conf, owncloud will take control of port 80 and your localhost domain. If you would like to have owncloud run in a subdirectory, then skip the 'Include /etc/httpd/conf/extra/owncloud.conf' line altogether and just use a symbolic link like so:

# ln -s /usr/share/webapps/owncloud/ /srv/http/

In that case, you'll also have to ensure /usr/share/webapps is in the open_basedir line of php.ini, and that per-directory .htaccess files are read by apache.

Alternatively, you could follow the standard procedure, but comment out the VirtualHost part of the include file, and skip the symlink/basedir/htaccess part.

Filling ownCloud with data

Small files

WebDav

Always use WebDAV or the web interface to add new files to your ownCloud. Otherwise they will not show up correctly, as they do not get indexed right. No further configuration is necessary to enable WebDAV uploads in ownCloud.

Consider installing and enabling php-apc to speed up WebDAV.

SABnzbd

When using SABnzbd, you might want to set

folder_rename 0

in your sabnzbd.ini file, because ownCloud will scan the files as soon as they get uploaded, preventing SABnzbd from removing UNPACKING prefixes etc.

Big files

WebDAV isn't suitable for big files, because it fills up all the RAM and CPU.

With the current version, it looks like, there is no good way of copying huge amounts of data to your ownCloud.

Here's a Workaround:

Copy the files directly to your ownCloud and do a full re-scan of your database (you could use the Re-scan filesystem add-on for example).

But beware that this will not work as easily in the future, when end-to-end encryption gets added to ownCloud (this is a planned feature).

Important notes

  • When using a subdomain (like cloud.example.net), make sure it is covered by your certificate. Otherwise, connection via the owncloud client or webdav might fail.
  • If you are planning on using OwnCloud's sync-clients, make sure to have NTP installed and running on your OwnCloud server, otherwise the sync-clients will fail.

(If adding SSL encryption as above, be sure to edit /etc/httpd/conf/extra/httpd-ssl.conf and change DocumentRoot "/srv/http" to DocumentRoot "/usr/share/webapps/owncloud" )

  • More Apps for ownCloud can be found here
  • To install an new application, download the zip from the apps store, extract it into /srv/http/owncloud/apps/.

Afterwards restart httpd:

systemctl restart httpd

log into your server go to the app sections you should see the new apps in there,

  • If you are protecting access to your owncloud location with HTTP basic auth, the file "status.php" must be excluded from auth and be publicly accessible. [1]

Nginx + uwsgi_php alternative

You can avoid the use of Apache, and run owncloud in it's own process by using the wsgi_php application server. uWSGI itself has a wealth of features to limit the resource use, and to harden the security of the application, and by being a separate process it can run under its own user.

The nginx config is:

#this is to avoid Request Entity Too Large error
client_max_body_size 1000M;
# deny access to some special files
location ~ ^/(data|config|\.ht|db_structure\.xml|README) {
    deny all;
}
# pass all .php or .php/path urls to uWSGI
location ~ ^(.+\.php)(.*)$ {
    include uwsgi_params;
    uwsgi_modifier1 14;
    uwsgi_pass 127.0.0.1:3001;
}
# everything else goes to the filesystem,
# but / will be mapped to index.php and run through uwsgi
location / {
    root /usr/share/webapps/owncloud;
    index index.php;
    rewrite ^/.well-known/carddav /remote.php/carddav/ redirect;
    rewrite ^/.well-known/caldav /remote.php/caldav/ redirect;
}

The uWSGI /etc/uwsgi/owncloud.ini config file (run it with uwsgi_php --ini /etc/uwsgi/owncloud.ini):

[uwsgi]
socket = 127.0.0.1:3001
master = true
chdir = /srv/http/owncloud
php-docroot = /usr/share/webapps/owncloud
php-index = index.php

# only allow these php files, I don't want to inadvertently run something else
php-allowed-ext = /index.php
php-allowed-ext = /public.php
php-allowed-ext = /remote.php
php-allowed-ext = /cron.php
php-allowed-ext = /status.php
php-allowed-ext = /settings/apps.php
php-allowed-ext = /core/ajax/update.php
php-allowed-ext = /core/ajax/share.php
php-allowed-ext = /core/ajax/requesttoken.php
php-allowed-ext = /core/ajax/translations.php
php-allowed-ext = /search/ajax/search.php
php-allowed-ext = /search/templates/part.results.php
php-allowed-ext = /settings/admin.php
php-allowed-ext = /settings/users.php
php-allowed-ext = /settings/personal.php
php-allowed-ext = /settings/help.php
php-allowed-ext = /settings/ajax/getlog.php
php-allowed-ext = /settings/ajax/setlanguage.php
php-allowed-ext = /settings/ajax/setquota.php
php-allowed-ext = /settings/ajax/userlist.php
php-allowed-ext = /settings/ajax/createuser.php
php-allowed-ext = /settings/ajax/removeuser.php
php-allowed-ext = /settings/ajax/enableapp.php
php-allowed-ext = /core/ajax/appconfig.php

php-set = date.timezone=Europe/Skopje
php-set = open_basedir=/srv/http/owncloud:/tmp/:/usr/share/pear/:/usr/share/webapps/owncloud

processes = 10
cheaper = 2
cron = -1 -1 -1 -1 -1 /usr/bin/curl -H https://localhost/cron.php

Finally, a simple systemd unit file to start the uwsgi instance can be (this is without using the emperor):

[Unit]
Description=OwnCloud service via uWSGI-PHP

[Service]
User=http
ExecStart=/usr/bin/uwsgi_php --ini /etc/uwsgi/owncloud.ini
ExecReload=/bin/kill -HUP $MAINPID
KillSignal=SIGQUIT
Restart=always

[Install]
WantedBy=multi-user.target

Sync Clients

The offical clients can be found in this page : Sync Clients Also take notice that while the offical owncloud android app is a paid app on the play store, it is not a paid app on F-Droid.

Troubleshooting

Self-signed certificate not accepted

OwnCloud uses Wikipedia:cURL and Wikipedia:SabreDAV to check if WebDAV is enabled. If you use a SSL/TLS with a self-signed certificate, e.g. as shown in LAMP and access ownClouds admin panel, you will see the following error message:

Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken.

Assuming that you followed the LAMP-tutorial, execute the following steps:

Create local directory for non-distribution certificates and copy LAMPs certificate there. This will prevent ca-certificates-updates to overwrite it.

$ cp /etc/httpd/conf/server.crt /usr/share/ca-certificates/WWW.EXAMPLE.COM.crt

Add WWW.EXAMPLE.COM.crt to /etc/ca-certificates.conf:

WWW.EXAMPLE.COM.crt

Now, regenerate your certificate store:

$ update-ca-certificates

Restart the httpd service to activate your certificate.

Can't create data directory (/path/to/dir)

Check your httpd conf file (like owncloud.conf). Add your data dir to

php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/path/to/dir/"

You should also modify php.ini in the same way. Restart the httpd service to activate the change.

CSync faild to find a specific file.

Most probably a certificate issue, recreate it, and don't leave the common name empty or you will see the error again.

openssl genrsa -out server.key 2048
openssl req -new -key server.key -x509 -days 365 -out server.crt

Seeing white page after login

The cause is probably a new app that you installed, to fix that you can either use phpMyAdmin by editing the oc_appconfig table(in the case you got lucky and the table has edit option) or do it by hand with mysql:

mysql -u root -p owncloud
MariaDB [owncloud]> delete from oc_appconfig where appid='<nameOfExtension>' and configkey='enabled' and configvalue='yes'
MariaDB [owncloud]> insert into oc_appconfig (appid,configkey,configvalue) values ('<nameOfExtension>','enabled','no');

This should delete the relevant configuration from the table and add it again.

GUI sync client fails to connect

If using HTTP basic auth, make sure to exclude "status.php", which must be publicly accessible [2]