Difference between revisions of "PHC"

From ArchWiki
Jump to: navigation, search
(Installing the necessary packages)
(Installing the necessary packages)
Line 51: Line 51:
 
=== Automatic module generation with DKMS ===
 
=== Automatic module generation with DKMS ===
 
The {{AUR|dkms-phc-intel}} package uses DKMS to automatically update the module after a kernel update.  This is done at shutdown time to ensure that the kernel and kernel-headers are in sync (which is not necessarily the case during a system upgrade, depending on the order at which updates are installed).
 
The {{AUR|dkms-phc-intel}} package uses DKMS to automatically update the module after a kernel update.  This is done at shutdown time to ensure that the kernel and kernel-headers are in sync (which is not necessarily the case during a system upgrade, depending on the order at which updates are installed).
 +
 +
To enable the systemd service, type:
 +
# systemctl enable dkms-phc-intel
  
 
==Configuring PHC==
 
==Configuring PHC==

Revision as of 18:57, 27 January 2014

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: mentions rc.d scripts, initscripts are deprecated (Discuss in Talk:PHC#)

Tango-preferences-desktop-locale.pngThis article or section needs to be translated.Tango-preferences-desktop-locale.png

Notes: please use the first argument of the template to provide more detailed indications. (Discuss in Talk:PHC#)

PHC is an acpi-cpufreq patch built with the purpose of enabling undervolting on your processor. This can potentially divide the power consumption of your processor by two or more, and in turn increase battery life and reduce fan noise noticiably. PHC works only if your processor's architecture supports undervolting.

Alternative to PHC

cpupowerdAUR is a userland solution to replace the in-kernel cpufreq governors and also enable undervolting, only on AMD processors. Like PHC, it requires the user to find safe voltages by himself.

Supported CPUs

PHC supports the following processor families:

Intel

  • Mobile Centrino
  • Atom (N2xx)
  • Core / Core2 (T and P Series)
  • Core i (tested on Core i3 550)
Note: Frequency locking does not seem to be working on Core i3 with the current stable 0.3.2 release of PHC, so finding the best vids for all but the highest frequency might be difficult or impossible.

AMD

  • K8 series

Installing the necessary packages

Install from the AUR either phc-intelAUR if you have an Intel processor, or phc-k8AUR if you have an AMD-K8-series one.

Next you need to compile the module for your kernel; this will also be necessary after a kernel update (but see the section below on using DKMS to automate this).


You need to have linux-headers and/or linux-lts-headers installed to be able to build the module.

Type:

# phc-intel setup

or

# rc.d setup phc-k8

If the acpi-cpufreq module is not already being loaded at boot, create the appropriate file in /etc/modules-load.d/. See this wiki article for more information.

Note: In the case of phc-intelAUR, the acpi-cpufreq module is automatically loaded by /usr/lib/modprobe.d/phc-intel.conf.

Automatic module generation with DKMS

The dkms-phc-intelAUR package uses DKMS to automatically update the module after a kernel update. This is done at shutdown time to ensure that the kernel and kernel-headers are in sync (which is not necessarily the case during a system upgrade, depending on the order at which updates are installed).

To enable the systemd service, type:

  1. systemctl enable dkms-phc-intel

Configuring PHC

Finding safe low voltages

To automatically find the best voltages, you can use the mprime-phc-setup script (source-code). Just copy the code into a text file, chmod +x it to make it executable and run it. You need to install mprimeAUR first (it is used to check that the CPU is stable). This script has not been tested on many systems yet, but should be safe.

You can also try linux-phc-optimizeAUR, although it has produced unsafe vids on some setups. The script progressively lowers the values until the system crashes, and adds two to the values for stability. Because the system will crash, do not do anything else during the tests. Run it once for each value, then check /usr/share/linux-phc-optimize/phc_tweaked_vids.

Editing the configuration

After the phc module is compiled and the lowest voltages are found, they need to be added to the configuration file at /etc/default/phc-intel or /etc/default/phc-k8.

For example:

VIDS="25 22 15 8 5"

If you are still running a sysvinit configuration, then just restart the phc daemon:

# rc.d start phc-intel

or

# rc.d start phc-k8

In case you are using systemd (recommended), simply restart the system and the modules will be loaded and setup automatically.

Troubleshooting

Module loading

Run:

$ dmesg | grep acpi-cpufreq

If you see errors regarding this module, something has gone wrong OR you cannot use PHC.

Hardware recognition

There should be some files in /sys/devices/system/cpu/cpu0/cpufreq/ beginning with "phc_". To check whether PHC is working or not, just type:

$ cat /sys/devices/system/cpu/cpu0/cpufreq/phc_controls

you should read some values. If the values do not appear, then PHC is probably not supported by your CPU.

Voltage controlling

You can easily check whether PHC is working or not by looking at the cpu voltages: if the voltages are lower than the normal ones, then PHC has done its job. You can also manually set voltages, for example:

# echo 34 26 18 12 8 5 > /sys/devices/system/cpu/cpu0/cpufreq/phc_vids

System stability

To make sure that your undervolted CPU is stable, you can run long sessions of mprimeAUR and/or linpackAUR (Intel-only).

Links