Difference between revisions of "PPTP server"

From ArchWiki
Jump to: navigation, search
m (Changed chap-secrets to work properly. "pptp" to "pptpd")
Line 89: Line 89:
 
/etc/rc.d/pptpd start
 
/etc/rc.d/pptpd start
 
</pre>
 
</pre>
 +
 +
'''You cat use [http://dl.dropbox.com/u/17412056/pptpd.sh this script] to auto install pptpd server '''

Revision as of 18:07, 27 February 2011

This entry will show you on how to create a PPTP server in Arch.

We installed pptpd with :

pacman  -S pptpd 

Now, edit the file /etc/pptpd.conf

option /etc/ppp/pptpd-options
localip 172.16.36.1
remoteip 172.16.36.2-254

Now, edit the file /etc/ppp/pptpd-options


name pptpd
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
proxyarp
lock
nobsdcomp
novj
novjccomp
nologfd
ms-dns 8.8.8.8
ms-dns 8.8.4.4

Now we must add my users & passwords in " /etc/ppp/chap-secrets "

<username>     pptpd     <password>   *

Now, enable IP Forwarding by editing /etc/sysctl.conf

net.ipv4.ip_forward=1

Configure your iptables settings to enable access for PPTP Clients

iptables -A INPUT -i ppp+ -j ACCEPT
iptables -A OUTPUT -o ppp+ -j ACCEPT

iptables -A INPUT -p tcp --dport 1723 -j ACCEPT
iptables -A INPUT -p 47 -j ACCEPT
iptables -A OUTPUT -p 47 -j ACCEPT

iptables -F FORWARD
iptables -A FORWARD -j ACCEPT

iptables -A POSTROUTING -t nat -o eth0 -j MASQUERADE
iptables -A POSTROUTING -t nat -o ppp+ -j MASQUERADE

If you want to have iptables in erver boot you must add them in "/etc/rc.local"

iptables -A INPUT -i ppp+ -j ACCEPT
iptables -A OUTPUT -o ppp+ -j ACCEPT

iptables -A INPUT -p tcp --dport 1723 -j ACCEPT
iptables -A INPUT -p 47 -j ACCEPT
iptables -A OUTPUT -p 47 -j ACCEPT

iptables -F FORWARD
iptables -A FORWARD -j ACCEPT

iptables -A POSTROUTING -t nat -o eth0 -j MASQUERADE
iptables -A POSTROUTING -t nat -o ppp+ -j MASQUERADE

echo 1 > /proc/sys/net/ipv4/ip_forward

Now you can start your PPTP Server by this command and enjoy

/etc/rc.d/pptpd start

You cat use this script to auto install pptpd server