PPTP server

From ArchWiki
Revision as of 17:02, 1 December 2010 by Sushiyant (Talk | contribs)

Jump to: navigation, search

This entry will show you on how to create a PPTP server in Arch.

We installed pptpd with :

pacman  -S pptpd 

Now, edit the file /etc/pptpd.conf

option /etc/ppp/pptpd-options
localip 172.16.36.1
remoteip 172.16.36.2-254

Now, edit the file /etc/ppp/pptpd-options


name pptpd
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
proxyarp
lock
nobsdcomp
novj
novjccomp
nologfd
ms-dns 8.8.8.8
ms-dns 8.8.4.4

Now we must add my users & passwords in " /etc/ppp/chap-secrets "

<username>     pptp     <password>   *

Now, enable IP Forwarding by editing /etc/sysctl.conf

net.ipv4.ip_forward=1

Configure your iptables settings to enable access for PPTP Clients

iptables -A INPUT -i ppp+ -j ACCEPT
iptables -A OUTPUT -o ppp+ -j ACCEPT

iptables -A INPUT -p tcp --dport 1723 -j ACCEPT
iptables -A INPUT -p 47 -j ACCEPT
iptables -A OUTPUT -p 47 -j ACCEPT

iptables -F FORWARD
iptables -A FORWARD -j ACCEPT

iptables -A POSTROUTING -t nat -o eth0 -j MASQUERADE
iptables -A POSTROUTING -t nat -o ppp+ -j MASQUERADE

If you want to have iptables in erver boot you must add them in "/etc/rc.local"

iptables -A INPUT -i ppp+ -j ACCEPT
iptables -A OUTPUT -o ppp+ -j ACCEPT

iptables -A INPUT -p tcp --dport 1723 -j ACCEPT
iptables -A INPUT -p 47 -j ACCEPT
iptables -A OUTPUT -p 47 -j ACCEPT

iptables -F FORWARD
iptables -A FORWARD -j ACCEPT

iptables -A POSTROUTING -t nat -o eth0 -j MASQUERADE
iptables -A POSTROUTING -t nat -o ppp+ -j MASQUERADE

echo 1 > /proc/sys/net/ipv4/ip_forward

Now you can start your PPTP Server by this command and enjoy

/etc/rc.d/pptpd start