PRIME is a technology used to manage hybrid graphics found on recent laptops (Optimus for NVIDIA, AMD Dynamic Switchable Graphics for Radeon). PRIME GPU offloading and Reverse PRIME is an attempt to support muxless hybrid graphics in the Linux kernel.
- 1 Installation
- 2 PRIME GPU offloading
- 3 Reverse PRIME
- 4 Troubleshooting
- 4.1 XRandR specifies only 1 output provider
- 4.2 When an application is rendered with the discrete card, it only renders a black screen
- 4.3 Kernel crash/oops when using PRIME and switching windows/workspaces
- 4.4 Glitches/Ghosting synchronization problem on second monitor when using reverse PRIME
- 4.5 Error "radeon: Failed to allocate virtual address for buffer:" when launching GL application
- 4.6 Constant hangs/freezes with Vulkan applications/games using VSync with closed-source drivers and Reverse PRIME
- 5 See also
Remove any closed-source graphic drivers and replace them with the open source equivalent:
Reboot and check the list of attached graphic drivers:
$ xrandr --listproviders
Providers: number : 2 Provider 0: id: 0x7d cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 4 associated providers: 1 name:Intel Provider 1: id: 0x56 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 6 outputs: 1 associated providers: 1 name:radeon
We can see that there are two graphic cards: Intel, the integrated card (id 0x7d), and Radeon, the discrete card (id 0x56), which should be used for GPU-intensive applications.
By default the Intel card is always used:
$ glxinfo | grep "OpenGL renderer"
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
"HAINAN @ pci:0000:03:00.0", not
radeon. In this case you should use
"HAINAN @ pci:0000:03:00.0"as the provider in the next command.
To get PRIME functioning on the proprietary drivers, it is pretty much the same process. Follow the following articles to install the drivers:
After you have the driver installed, do not reboot or relaunch Xorg. Depending on your system configuration, this may render your Xorg system unusable until reconfigured.
Follow the instructions for the section on your designated use-case. You do not need to uninstall the open-source drivers for it to function, but you probably should, for the sake of preventing clutter and potential future issues.
PRIME GPU offloading
GPU-intensive applications should be rendered on the more powerful discrete card. The command
xrandr --setprovideroffloadsink provider sink can be used to make a render offload provider send its output to the sink provider (the provider which has a display connected). The provider and sink identifiers can be numeric (0x7d, 0x56) or a case-sensitive name (Intel, radeon).
$ xrandr --setprovideroffloadsink radeon Intel
You may also use provider index instead of provider name:
$ xrandr --setprovideroffloadsink 1 0
Now, you can use your discrete card for the applications who need it the most (for example games, 3D modellers...) by prepending the
DRI_PRIME=1 environment variable:
$ DRI_PRIME=1 glxinfo | grep "OpenGL renderer"
OpenGL renderer string: Gallium 0.4 on AMD TURKS
Other applications will still use the less power-hungry integrated card. These settings are lost once the X server restarts, you may want to make a script and auto-run it at the startup of your desktop environment (alternatively, put it in
/etc/X11/xinit/xinitrc.d/). This may reduce your battery life and increase heat though.
If the second GPU has outputs that are not accessible by the primary GPU, you can use Reverse PRIME to make use of them. This will involve using the primary GPU to render the images, and then pass them off to the secondary GPU.
In the scenario above, you would do
$ xrandr --setprovideroutputsource radeon Intel
When this is done, the discrete card's outputs should be available in xrandr, and you could do something like:
$ xrandr --output HDMI-1 --auto --above LVDS1
Discrete card as primary GPU
Imagine following scenario: The LVDS1 (internal laptop screen) and VGA outputs are both only accessible through the integrated Intel GPU. The HDMI and Display Port outputs are attached to the discrete NVIDIA card. It is possible to use all four outputs by making use of the Reverse PRIME technology as described above. However the performance might be slow, because all the rendering for all outputs is done by the integrated Intel card. To improve this situation it is possible to do the rendering by the discrete NVIDIA card, which then copies the framebuffers for the LVDS1 and VGA outputs to the Intel card.
Create the following Xorg configuration:
Section "ServerLayout" Identifier "layout" Screen 0 "nouveau" Inactive "intel" EndSection Section "Device" Identifier "nouveau" Driver "nouveau" BusID "PCI:x:x:x" # Sample: "PCI:1:0:0" EndSection Section "Screen" Identifier "nouveau" Device "nouveau" EndSection Section "Device" Identifier "intel" Driver "intel" BusID "PCI:x:x:x" # Sample: "PCI:0:2:0" EndSection Section "Screen" Identifier "intel" Device "intel" EndSection
Restart Xorg. The discrete NVIDIA card should be used now. The HDMI and Display Port outputs are the main outputs. The LVDS1 and VGA outputs are off. To enable them run:
$ xrandr --setprovideroutputsource Intel nouveau
The discrete card's outputs should be available now in xrandr.
XRandR specifies only 1 output provider
Delete/move /etc/X11/xorg.conf file and any other files relating to GPUs in /etc/X11/xorg.conf.d/. Restart the X server after this change.
If the video driver is blacklisted in
/etc/modprobe.d/, load the module and restart X. This may be the case if you use the bbswitch module for Nvidia GPUs.
Another possible problem is that Xorg might try to automatically assign monitors to your second GPU. Check the logs:
$ grep "No modes" ~/.local/share/xorg/Xorg.0.log
AMDGPU(0): No modes.
To solve this add the ServerLayout section with inactive device to your xorg.conf:
Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 # Screen for your primary GPU Inactive "Card1" # Device for your second GPU EndSection
When an application is rendered with the discrete card, it only renders a black screen
In some cases PRIME needs a composition manager to properly work. If your window manager doesn’t do compositing, you can use xcompmgr on top of it.
If you use Xfce, you can go to Menu->Settings->Window Manager Tweaks->Compositor and enable compositing, then try again your application.
Black screen with GL-based compositors
Currently there are issues with GL-based compositors and PRIME offloading. While Xrender-based compositors (xcompmgr, xfwm, compton's default backend, cairo-compmgr, and a few others) will work without issue, GL-based compositors (Mutter/muffin, Compiz, compton with GLX backend, Kwin's OpenGL backend, etc) will initially show a black screen, as if there was no compositor running. While you can force an image to appear by resizing the offloaded window, this is not a practical solution as it will not work for things such as full screen Wine applications. This means that desktop environments such as GNOME3 and Cinnamon have issues with using PRIME offloading.
Additionally if you are using an Intel IGP you might be able to fix the GL Compositing issue by running the IGP as UXA instead of SNA, however this may cause issues with the offloading process (ie, xrandr --listproviders may not list the discrete GPU).
For details see FDO Bug #69101.
One other way to approach this issue is by enabling DRI3 in the Intel driver. See the below issue for a sample config.
Kernel crash/oops when using PRIME and switching windows/workspaces
Note: this has been tested on a system with Intel+AMD
Using DRI3 WITH a config file for the integrated card seems to fix this issue.
To enable DRI3, you need to create a config for the integrated card adding the DRI3 option:
Section "Device" Identifier "Intel Graphics" Driver "intel" Option "DRI" "3" EndSection
After this you can use DRI_PRIME=1 WITHOUT having to run
xrandr --setprovideroffloadsink radeon Intel as DRI3 will take care of the offloading.
Glitches/Ghosting synchronization problem on second monitor when using reverse PRIME
If you experience this problem under Gnome, then a possible fix is to set some environment variables in
Error "radeon: Failed to allocate virtual address for buffer:" when launching GL application
This error is given when the power management in the kernel driver is running. You can overcome this error by appending radeon.runpm=0 to the kernel parameters in the bootloader.
Constant hangs/freezes with Vulkan applications/games using VSync with closed-source drivers and Reverse PRIME
Some Vulkan applications (particularly ones using VK_PRESENT_MODE_FIFO_KHR and/or VK_PRESENT_MODE_FIFO_RELAXED_KHR, including Windows games ran with DXVK) will cause the GPU to lockup constantly (~5-10 seconds freezed, ~1 second working fine) when ran on a system using Reverse PRIME.
A GPU lockup will render any input unusable (this includes switching TTYs and using SysRq functions).
There's no known fix for this NVIDIA bug, but a few workarounds exist:
- Turning Vsync off (not possible for some applications)
- Turning PRIME Synchronization off (will introduce screen tearing):
xrandr --output HDMI-0 --set "PRIME Synchronization" 0 #replace HDMI-0 with your xrandr output ID
You can verify if your configuration is affected by the issue simply by running vkcube from thepackage.