Post Installation Tips
As a new Archer, some tasks needed to be accomplished after the fresh install. Here are some performance tweaks and other useful information for Arch Linux newbies.
- 1 Hardware
- 2 KDE Performace
- 3 Pausing at End of Boot Process
- 4 ALSA
- 5 Start X at boot
- 6 Builing your own Kernel
- 7 ABS to build your own packages
- 8 Optimizing mkpkg packages
- 9 Kernel Updates
- 10 Personal Command-aliases
- 11 Reduce Sleeping time on shutdown
- 12 Set timezone
- 13 PDF file viewer (kghostview)
- 14 Useful Commands & Programs
- 15 File Descriptions
- 16 Extracting compressed files
hwd is your hardware auto-recognition tool. It will inform you which module you need to load and set. It is now available as a package in the extra repository. To speed up lilo boot process, add the following command to /etc/lilo.conf</ :
- to boost hd performance, tweak using hdparm. best place to put it (imho) is in/etc/rc.sysinit, as the 1st line... my hdparm parameters are :
- -a1024 = sets read_ahead buffer to 1024 bytes
- -c3 = sets io support to 32bit with sync
- -d1 = turn on dma
- -m16 = sets multile buffers count to 16 (my hd max. find it using hdparm -i)
example: hdparm -a1024 -c3 -d1 -m16 /dev/hda
- to boost KDE performance, install portmap & fam and add them to /etc/rc.conf under DAEMONS. dont forget to make sure they are actually running - use
=ps aux</code> to check if they are loaded.
Pausing at End of Boot Process
- to pause at the end of the boot process before getting the login prompt (usually used for for debugging your boot messages...), add at the end of /etc/rc.local :
or else remove the 1st charcter in /etc/issue file, which is a "clear screen" escape code.
- Alsa setup If using UDEV, also see for permission issues: http://wiki.archlinux.org/index.php/UdevHowTo
Start X at boot
Builing your own Kernel
- When building your own kernel (Kernel & Hardware Issues), following options must be set and linked staticly and NOT as modules :
- Code maturity level options
- Prompt for development and/or incomplete code/drivers = on
- Device Drivers
- File systems
- Pseudo filesystems
- /dev file system support = on
- Automatically mount at boot = on
- to be able to tweak hd performance using hdparm, set the followings :
- Device Drivers
- ATA/ATAPI/MFM/RLL support = on
- Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support = on
- Generic PCI bus-master DMA support = on
- Intel PIIXn chipsets support = on
- <and your IDE hdw...> = on
- also, to speed kernel loading time a bit, make sure you staticly link ALL yourhardware specific drivers (which you load anyway using /etc/modprobe.conf orotherwise) instead of linking them as modules
ABS to build your own packages
- if you use abs to build your own packages, remember to copy 1st your target package dir to /var/abs/local/<pkgname> to avoid your files and configuation getting overwritten at next abs update...
Optimizing mkpkg packages
- for optimizing the packages you build using makepkg (kernel is a good example) set your gcc preffered settings in /etc/makepkg.conf:
(example for athlon cpu) export CARCH="athlon" export CHOST="athlon-pc-linux-gnu" export CFLAGS="-march</code>athlon -O2 -pipe -fomit-frame-pointer" export CXXFLAGS="-march</code>athlon -O2 -pipe -fomit-frame-pointer"
- Remeber to execute "lilo" after each kernel update (ie, each time you replace your boot image, usually named /boot/vmlinuzXX, etc).
- If you forgot and need torescue back from the cd, here are the rescue steps:
modprobe xfs mount -t xfs /dev/discs/discX/partY /mnt mount -t xfs /dev/discs/discV/partW /mnt/boot (if you have it) mount -t devfs none /mnt/dev mount -t proc none /mnt/proc chroot /mnt /sbin/lilo
- you can create your own commands-aliases using "<homedir>/.bashrc" file or "/etc/profile" file. both can be used to define your own aliases:
#alias ls="ls --color=auto" not necessary in Arch alias ll="ls -lh" alias la="ls -a" alias exit="clear; exit" alias x="startx"
Reduce Sleeping time on shutdown
- you can reduce system sleeping time on shutdown by changing the sleep parameter in "/etc/rc.shutdown" & "/etc/rc.single" files.
- to set your timezone (so local time shows properly) look at "/usr/share/zoneinfo/" for your timezone, and change the TIMEZONE variable in "/etc/rc.conf" :
PDF file viewer (kghostview)
- to fix PDF files viewer (kghostview), install ghostscript using:
pacman -S ghostscript
- and change the Ghostscript section in file ">home dir</.kde/share/config/kghostviewrc" to :
Antialiasing arguments=-sDEVICE=x11 -dTextAlphaBits=4 -dGraphicsAlphaBits=<2 -dMaxBitmap=10000000 GS Version= Interpreter=/usr/bin/gs Non-antialiasing arguments=-sDEVICE=x11 Redetection Counter=2
Useful Commands & Programs
- grep - searches for files by its contents. (example : "grep -i syslog /etc/*" will search all files in /etc for files containing the word "syslog", NOT case sensetive (using the "-i" parameter))
- killall <process_name> - kills processes by name (example : "killall kdm")
- ps - display process status (example : "ps -xau" will display all active processes)
- locate - quickly locates files on your hd (use "locate -u" 1st to create/update the files db...) (example : "locate Xservers" will find all files named Xservers)
An automated tool for managing your packages - localy and via the web. It will auto-solve dependencies among packages, which is the bigest headache in the linux-packaging-distribution-world(-as-we-know-it-:) ).
An automated tool to create packages - it actually automates the "./configure, make, make install" procedure. it uses a file named PKGBUILD which must exists in the same directory you will build your package. view a PKGBUILD file and read the installation document to learn more how to work with makepkg.
An automated tool which allows you to rebuild any of pacmans' packages (so you may provide your own compiler and linker settings, for better optimazation, debugging info, etc). simply executing abs will synchronize all your PKGBUILD scripts from the CVS repository into /var/abs.
- <homedir>/.xinitrc - controls which programs X11 will load on startup. the last line must be your preferred windows manager and should be prefixed with "exec"
- /etc/profile - system profiling file. loads environment confiuration per profile. (kernel must support profiling)
- /etc/rc.conf - main configuration file, something like config.sys on steroids...
- /etc/rc.sysinit - this is like the main autoexec.bat file, which takes care of loading and setting up the system.
- /etc/rc.single - script file for single user system level
- /etc/rc.multi - script file for multiple users system level
- /etc/rc.local - script file for local-multi users system level
- /etc/rc.shutdown - script file for shutdown system level
- /etc/rc.d/* - configured deamons for the system.
Extracting compressed files
file.tar : tar xvf file.tar file.tgz : tar xvzf file.tgz file.tar.gz : tar xvzf file.tar.gz file.bz : bzip -cd file.bz || tar xvf - file.bz2 : tar xvjf file.tar.bz2 OR bzip2 -cd file.bz2 || tar xvf - file.zip : unzip file.zip
WikiMigration & Rewrite--dlanor 15:36, 23 Jul 2005 (EDT)</pre>